Recipe for new resin suited to making electrodes uses lasers for molding into almost any 3-D shape
Though its surface has been turned to carbon, the bunny-like features can still be easily observed with a microscope. This rabbit sculpture, the size of a typical bacterium, is one of several whimsical shapes created by a team of Japanese scientists using a new material that can be molded into complex, highly conductive 3-D structures with features just a few micrometers across. Combined with state-of-the-art micro-sculpting techniques, the new resin holds promise for making customized electrodes for fuel cells or batteries, as well as biosensor interfaces for medical uses. The research team, which includes physicists and chemists from Yokohama National University, Tokyo Institute of Technology, and the company C-MET, Inc., presents its results in a paper published today in the Optical Society’s (OSA) open-access journal Optical Materials Express.
The work opens a door for researchers trying to create conductive materials in almost any complex shape at the microscopic or cellular level. “One of the most promising applications is 3-D microelectrodes that could interface with the brain,” says Yuya Daicho, graduate student at Yokohama National University and lead author of the paper. These brain interfaces, rows of needle-shaped electrodes pointing in the same direction like teeth on combs, can send or receive electrical signals from neurons and can be used for deep brain stimulation and other therapeutic interventions to treat disorders such as epilepsy, depression, and Parkinson’s disease. “Although current microelectrodes are simple 2-D needle arrays,” Daicho says, “our method can provide complex 3-D electrode arrays” in which the needles of a single device have different lengths and tip shapes, giving researchers more flexibility in designing electrodes for specialized purposes. The authors also envision making microscopic 3-D coils for heating applications.
Currently, researchers have access to materials that can be used to make complex 3-D structures. But the commercially available resins that work best with modern 3-D shaping techniques do not respond to carbonization, a necessary part of the electrode preparation process. In this stage, a structure is baked at a temperature high enough to turn its surface to carbon. The process of “carbonizing,” or charring, increases the conductivity of the resin and also increases its surface area, both of which make it a good electrode. Unfortunately, this process also destroys the resin’s shape; a sphere becomes an unrecognizable charred blob. What researchers needed were new materials that could be crafted using 3-D shaping techniques but that would also survive the charring process.
The Japanese team, led by Daicho and his advisor Shoji Maruo, sought to develop materials that would fit these needs. Trained as a chemist, Daicho developed a light-sensitive resin that included a material called Resorcinol Diglycidyl Ether (RDGE), typically used to dilute other resins but never before used in 3-D sculpting. The new mixture had a unique advantage over other compounds – it was a liquid, and therefore potentially suitable for manipulation using the preferred 3-D sculpting methods.
Daicho, Maruo, and colleagues tested three different concentrations of RDGE in their new compounds. Though there was shrinkage, the materials held their shapes during the charring process (controlled shrinkage of a microstructure can be a good thing in cases where miniaturization of a structure is desired). The resin with the lowest concentration of RDGE shrank 30 percent, while that with the highest concentration shrank 20 percent.
The researchers also tested their new resin’s ability to be manipulated using techniques specifically suited for 3-D shaping. In one technique, called microtransfer molding, the light-sensitive liquid was molded into a desired shape and then hardened by exposure to ultraviolet (UV) light. The other technique, preferred because of its versatility, made use of the liquid resin’s property of solidifying when exposed to a laser beam. In this process, called two-photon polymerization, researchers used the laser to “draw” a shape onto the liquid resin and build it up layer by layer. Once the objects were shaped, they were carbonized and viewed with a scanning electron microscope (SEM).
In addition to crafting pyramids and discs, the researchers reproduced the well-known “Stanford bunny,” a shape commonly used in 3-D modeling and computer graphics. Maruo says that when he first saw a picture of the rabbit structure taken with the SEM, he was delighted at how well it had held up during the charring process.
“When we got the carbon bunny structure, we were very surprised,” Maruo says. It was exciting, he continues, to see that “even with a very simple experimental structure, we could get this complicated 3-D carbon microstructure.” The rabbit’s shape would be much more difficult, expensive, and time-consuming to create using any of the existing processes compatible with carbonization, he adds.
The Latest Bing News on:
3-D Shaping
- Racial bias did not shape Mississippi’s water funding decisions for capital city, EPA sayson May 9, 2024 at 1:21 pm
The U.S. Environmental Protection Agency says it found “insufficient evidence” that racial discrimination shaped decisions made by two Mississippi agencies about water system funding for the ...
- Blurred lasers make for better 3D printed optics, study findson May 9, 2024 at 10:07 am
R esearchers from the National Research Council of Canada (NRCC) have discovered a new way to make better-quality 3D-printed optics. Seemingly counterintuitively, the answer appears to be to blur the ...
- Autodesk unveils research Project Bernini for generative AI 3D shape creationon May 9, 2024 at 3:07 am
Many other 3D generative models might produce shapes that look like a pitcher with textures that ... If you wish to promote a Webinar we recommend at least a 3 to 4 week campaign prior to your event.
- Autodesk Unveils Project Bernini, A New Generative AI Tool That Creates 3D Shapeson May 8, 2024 at 12:59 pm
Autodesk unveiled a new research project today called Project Bernini, with the mission of developing generative AI models that can quickly generate functional 3d shapes, which can then be further ...
- Study unveils 3D printing PQD-polymer architectures at room temperatureon May 2, 2024 at 7:52 am
A technology enabling the fabrication of intricate three-dimensional (3D) quantum dot (QD)-based structures at room temperature has been developed.
- 3 3D Printing Stocks With the Potential to Make You an Overnight Millionaireon April 30, 2024 at 4:07 am
However, companies that strategically position themselves within the 3-D printing industry as supporters and hybrid ... Sign up for our newsletter to get the latest on the transformative forces ...
- Wheat crop shaping up better than past two years, but prices are lowon April 26, 2024 at 5:00 pm
so the rainfall to date is only 1 inch in the western Panhandle and 2-3 inches in the eastern Panhandle. This has slowed some development. Reagan Noland, Ph.D., AgriLife Extension agronomist ...
- Elusive 3D printed nanoparticles could lead to new shapeshifting materialson March 25, 2024 at 7:10 am
"We've used a 3D nanoprinting technique to produce one of the most promising shapes known—Archimedean truncated tetrahedrons. They are micron-scale tetrahedrons with the tips lopped off." ...
- Watch: Recognising 3D shapeson July 25, 2020 at 9:11 pm
Faces - A face is a flat surface on a 3D shape. For example a cube has 6 faces. Edges - An edge is where two faces meet. For example a cube has 12 edges. Vertices - A vertex is a corner where ...
- How to Convert a 2D Model to 3D Using AutoCADon April 17, 2018 at 10:07 pm
"Extrude" is how 3-D modelers to refer to the technique of stretching a 2-D shape into 3-D space. AutoCAD performs this expansion by first extending a new axis at right angles to the 2-D axes on ...
The Latest Google Headlines on:
3-D Shaping
[google_news title=”” keyword=”3-D Shaping” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
3-D sculpting
- See stunning reconstruction of ancient Egyptian mummy that languished at an Australian high school for a centuryon May 9, 2024 at 7:53 am
Mann works for the Victorian Institute of Forensic Medicine (VFIM) in Melbourne and has sculpted faces for several historical figures, including the reconstruction in 2016 of Meritamun, an ancient ...
- Clear Lake approves sculpture project featuring Holly, Valens, and Big Bopperon May 9, 2024 at 4:49 am
The sculpture is funded through the state’s Destination Iowa ... Following the council’s approval Monday, the design process will begin in which Brodin uses a 3D modeler which can scan items — like ...
- 3D Design students work on self-portraits for their final projecton May 8, 2024 at 9:17 pm
If you were an animal, which one would you be? This was the question the 3D design students were faced with for their final project. They were given the assignment to sculpt a self-portrait, but with ...
- Hands on With the Meshy.ai Text-to-3D Serviceon May 8, 2024 at 4:33 pm
There are plenty of Text-to-3D services popping up in recent months, and honestly most of them produce quite poor results. In fact I have been trying out quite a few, but the qual ...
- Exclusive: Autodesk's AI turns text or still images into 3D modelson May 8, 2024 at 2:30 am
Autodesk, the venerable 3D software company whose tools are used by designers and architects around the globe, is showing off its most ambitious generative AI project to date: a text-to-3D tool called ...
- Apple iPad event: all the news from Apple’s ‘Let Loose’ revealon May 7, 2024 at 3:16 pm
Apple is expected to refresh its iPad lineup for the first time in over a year on May 7th at 7AM PT / 10AM ET during its “ Let Loose ” event. It’s all but certain that this means the company will ...
- Nicki Minaj Transformed Into a Floral Sculpture at the 2024 Met Galaon May 6, 2024 at 6:27 pm
Given tonight’s Met Gala guests adhered to a “Garden of Time” dress code, it’s not surprising that many A-list celebrities embraced sprightly florals on the red carpet. But few did so as well (and as ...
- A stunning metal sculpture shows ‘the beauty of Black women all over the world’on May 6, 2024 at 12:57 am
Nigerian artist Dotun Popoola celebrates the beauty of Blackness while protesting “environmental decadence.” His latest work will be shown at a US museum exploring the legacy of slavery.
- Frank Stella, artist renowned for blurring the lines between painting and sculpture, dies at 87on May 4, 2024 at 5:30 pm
Frank Stella, a painter, sculptor and printmaker whose constantly evolving works served as landmarks of the minimalist and post-painterly abstraction art movements, has died. He was 87. Gallery owner ...
- Ten Pieces at Home Showcaseon May 2, 2024 at 4:14 am
Creating a 3D sculpture inspired by Anna Clyne's 'Night Ferry' Take a look at some wonderful work made by children across the UK whilst they stay at home. In week six's activity Artist Amy Leung ...
The Latest Google Headlines on:
3-D sculpting
[google_news title=”” keyword=”3-D sculpting” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]