Scanning electron microscope (SEM) image of layered stacks of nano-scale flash graphene sheets formed from waste plastic. (Image courtesy of Kevin Wyss/Tour lab)
Graphene by-product offsets ‘flash’ hydrogen production costs, Rice study finds
Hydrogen is viewed as a promising alternative to fossil fuel, but the methods used to make it either generate too much carbon dioxide or are too expensive. Rice University researchers have found a way to harvest hydrogen from plastic waste using a low-emissions method that could more than pay for itself.
“In this work, we converted waste plastics ? including mixed waste plastics that don’t have to be sorted by type or washed ? into high-yield hydrogen gas and high-value graphene,” said Kevin Wyss, a Rice doctoral alumnus and lead author on a study published in Advanced Materials. “If the produced graphene is sold at only 5% of current market value ? a 95% off sale! ? clean hydrogen could be produced for free.”
By comparison, ‘green’ hydrogen ? produced using renewable energy sources to split water into its two component elements ? costs roughly $5 for just over two pounds. Though cheaper, most of the nearly 100 million tons of hydrogen used globally in 2022 was derived from fossil fuels, its production generating roughly 12 tons of carbon dioxide per ton of hydrogen.
“The main form of hydrogen used today is ‘gray’ hydrogen, which is produced through steam-methane reforming, a method that generates a lot of carbon dioxide,” said James Tour, Rice’s T. T. and W. F. Chao Professor of Chemistry and a professor of materials science and nanoengineering. “Demand for hydrogen will likely skyrocket over the next few decades, so we can’t keep making it the same way we have up until now if we’re serious about reaching net zero emissions by 2050.”
The researchers exposed plastic waste samples to rapid flash Joule heating for about four seconds, bringing their temperature up to 3100 degrees Kelvin. The process vaporizes the hydrogen present in plastics, leaving behind graphene ? an extremely light, durable material made up of a single layer of carbon atoms.
“When we first discovered flash Joule heating and applied it to upcycle waste plastic into graphene, we observed a lot of volatile gases being produced and shooting out of the reactor,” Wyss said. “We wondered what they were, suspecting a mix of small hydrocarbons and hydrogen, but lacked the instrumentation to study their exact composition.”
Using funding from the United States Army Corps of Engineers, the Tour lab acquired the necessary equipment to characterize the vaporized contents.
“We know that polyethylene, for example, is made of 86% carbon and 14% hydrogen, and we demonstrated that we are able to recover up to 68% of that atomic hydrogen as gas with a 94% purity,” Wyss said. “Developing the methods and expertise to characterize and quantify all the gases, including hydrogen, produced by this method was a difficult but rewarding process for me.
“I am glad that techniques I learned and used in this work ? specifically life-cycle assessment and gas chromatography ? can be applied to other projects in our group. I hope that this work will allow for the production of clean hydrogen from waste plastics, possibly solving major environmental problems like plastic pollution and the greenhouse gas-intensive production of hydrogen by steam-methane reforming.”
Original Article: Making hydrogen from waste plastic could pay for itself
More from: Rice University
The Latest Updates from Bing News
Go deeper with Bing News on:
Hydrogen from plastic waste
- Biomass, captured carbon and plastic waste can help 'defossilize' chemicals, report says
Policy briefing sets out how industry can move away from fossil fuel feedstocks and embrace low carbon and sustainable alternatives ...
- Waste plastic hydrogen pyrolysis test site gains conditional approval
While the application, from Newark-based Newton Energi, is for a test facility, not commercial hydrogen production site, it is designed to use as ...
- New jobs as pioneering centre to turn plastics into hydrogen approved in Rotherham
A pioneering recycling centre which will convert plastic rubbish into hydrogen has been given the green light in Rotherham.
- Hydrogen facility approved at former steelworks
A proposed facility to produce hydrogen from waste plastic has been approved (image credit: Pixabay) Plans for a job-creating facility to produce hydrogen from waste plastic at a former steelworks in ...
- Recycling and Waste News
Scientists Develop Framework to Measure Plastic Emissions and ... have found a way to transform metal waste into a highly efficient catalyst to make hydrogen from water, a discovery that could ...
Go deeper with Bing News on:
Flash hydrogen production
- Manganese sprinkled with iridium: a quantum leap in green hydrogen production
Researchers report a new method that reduces the amount of iridium needed to produce hydrogen from water by 95%, without altering the rate of hydrogen production. This breakthrough could revolutionize ...
- Chipmaking to go subzero — 3D flash memory manufactured at -70C with next-gen tool
SK Hynix reportedly says 3D NAND chipmaking goes subzero as higher flash memory stacks must be produced at -70C temps.
- Multilateral development banks must prioritize clean & community-led energy projects (commentary)
By Alessandro Ramazzotti/Vaishnavi Varadarajan/Anggita Indari The intensifying impact of the climate crisis on frontline communities in the Global South, record-breaking CO2 emissions, and global ...
- Hydrogen production project marks one-year milestone
A pioneering hydrogen project is celebrating the one-year anniversary of its first operational hydrogen production facility in South Wales, Pioneer 1. Green hydrogen company Protium Green Solutions is ...
- Hungarian Group Inaugurates Green Hydrogen Production Project
A Hungarian company that operates refineries and petrochemical plants, and runs service stations across Central and Eastern Europe, said it is set to begin commercial operation of a 10-MW green ...