The new self-powered thermoelectric generator device uses an ultra-broadband solar absorber (UBSA) to capture sunlight, which heats the generator. Simultaneously, another component called a planar radiative cooling emitter (RCE) cools part of the device by releasing heat.
CREDIT: Haoyuan Cai, Jimei University
Thermoelectric generator could provide reliable power for outdoor sensors or wearable electronics
Researchers have developed a new thermoelectric generator (TEG) that can continuously generate electricity using heat from the sun and a radiative element that releases heat into the air. Because it works during the day or night and in cloudy conditions, the new self-powered TEG could provide a reliable power source for small electronic devices such as outdoor sensors.
“Traditional power sources like batteries are limited in capacity and require regular replacement or recharging, which can be inconvenient and unsustainable,” said research team leader Jing Liu from Jimei University in China. “Our new TEG design could offer a sustainable and continuous energy solution for small devices, addressing the constraints of traditional power sources like batteries.”
TEGs are solid state devices that use temperature differences to generate electricity without any moving parts. In the Optica Publishing Group journal Optics Express, Liu and a multi-institutional team of researchers describe and demonstrate a new TEG that can simultaneously generate the heat and cold necessary to create a temperature difference large enough to generate electricity even when the sun isn’t out. The passive power source is made of components that can easily be manufactured.
“The unique design of our self-powered thermoelectric generator allows it to work continuously, no matter the weather,” said Liu. “With further development, our TEG has the potential to impact a wide range of applications, from remote sensors to wearable electronics, promoting a more sustainable and eco-friendly approach to powering our daily lives.”
Boosting TEG performance
When a thermoelectric material experiences a temperature gradient, electrons will flow from the hot portion to the cold portion, generating an electric current. Although TEGs based on this phenomenon exist, they tend to produce unstable temperature differences and don’t generate enough electricity to be useful.
To address these limitations, the researchers developed a new type of TEG. It uses a component called an ultra-broadband solar absorber (UBSA) to capture sunlight, which heats one side of the generator. Simultaneously, another component called a planar radiative cooling emitter (RCE) cools down the other side by releasing heat. Both the UBSA and RCE can be applied to a flexible substrate, which could be useful for powering wearable devices, for example.
Because the heating power of the UBSA is significantly greater than the cooling power of the RCE under normal sunlight intensity, the researchers placed the RCE on top of an UBSA with a larger area. When sunlight hits the entire device, the unshaded parts of UBSA absorb the sun’s energy to heat up while the RCE on top begins to cool. The combination of heating and cooling creates a temperature difference that is converted into electricity.
At night or on cloudy days, the temperature difference is significantly reduced due to the absence of direct sunlight. However, there is still some temperature difference that can be utilized to generate electricity, albeit at a lower efficiency compared to a sunny day.
Generating power at night
To test the device, the researchers conducted outdoor experiments under different weather conditions. They monitored the voltage output of the device and found that it could generate electricity continuously throughout the day and night and during cloudy daylight conditions. The device achieved a peak voltage output of 166.2 mV during clear daytime conditions, enough to power a small sensor or device. During clear nighttime and cloudy daytime conditions, it generated 14.7 mV and 95 mV, respectively.
“Our innovative method for combining solar heating with radiative cooling allows the TEG to generate electricity that is uninterrupted,” said research team member Haoyuan Cai. “This could improve access to critical services, particularly in remote or underdeveloped areas where traditional power sources are not available.”
The researchers are now working to further optimize the device’s efficiency, durability and scalability and plan to test its long-term stability and reliability under various conditions. They also want to explore the potential for mass production at a reasonable cost and make improvements in the device’s performance and adaptability to different applications.
Original Article: New passive device continuously generates electricity during the day or night
More from: Jimei University
The Latest Updates from Bing News
Go deeper with Bing News on:
Thermoelectric generator
- UPNA team produces geothermal power in Antarctica with thermoelectric tech
A group of researchers from the Spain's UPNA has deployed thermoelectric generators to produce geothermal power for volcanic monitoring in Antarctica.
- Best Whole House Generators Of May 2024
Commissions do not affect our editors' opinions or evaluations. Whole house generators can help you disconnect from the grid entirely or keep your appliances running during extended power outages ...
- The Best Quiet Generators for a Peaceful Power Supply, Tested
Generators provide portable electricity for emergencies, on jobsites, or even camping trips, but finding a quiet generator can pose a challenge. We wanted to find out if generators advertised as ...
- NASA’s mini nuclear power generators step closer to reality
NASA approved a project led by the Rochester Institute of Technology aimed at creating a nuclear power source significantly smaller than those currently used in planeta ...
- It May be Possible to Power Implantable Generators with Our Bodies
Researchers are trying to solve the problem of powering implantable devices to help improve and save lives.
Go deeper with Bing News on:
TEGs
- ‘Red carpets’ spotted on Queensland roads – but what do they mean?
According to Transport for NSW, TEGs would be installed on roads where "there is poor speed compliance with the posted speed limit within or an entry of a town", stretches of road with a "history of ...
- Save big on select Bosch power tools now
Now is the time to upgrade to Big Blue. For the month of May get great savings on select Bosch power tools at TEGS Tools.
- ASR Africa Donates Classroom Blocks To University Of Uyo
The Abdul Samad Rabiu Africa Initiative (ASR Africa) has commenced the construction of four blocks of classrooms donated to the University of Uyo at its main campus via a grant of the sum of two ...
- ASR Africa Commences The Construction Of A 500-Capacity Lecture Theatre And Facilities Worth 250 Million Naira For The Adamawa State University, Mubi, Nigeria
The Abdul Samad Rabiu Africa Initiative (ASR Africa) commences the construction of a 500-capacity lecture theatre and wash facilities for the Adamawa State University, Mubi. This project is coming ...
- It May be Possible to Power Implantable Generators with Our Bodies
Researchers are trying to solve the problem of powering implantable devices to help improve and save lives.