Taking up only as much space as a walk-in closet, a new carbon capture and conversion system is simple and efficient at removing carbon dioxide from gas that’s rich with carbon dioxide. On the left of this walk-in fume hood, “smoke” moves through a cylindrical container where it makes contact with a carbon-capturing solvent. That solvent chemically binds to carbon dioxide and, on the right, is converted to methanol.
(Photo by Eric Francavilla | Pacific Northwest National Laboratory)
PNNL scientists carve a path to profit from carbon capture through carbon upcycling, unlock crucial step in decarbonization and advancing toward net zero emissions
The need for technology that can capture, remove and repurpose carbon dioxide grows stronger with every CO2 molecule that reaches Earth’s atmosphere. To meet that need, scientists at the Department of Energy’s Pacific Northwest National Laboratory have cleared a new milestone in their efforts to make carbon capture more affordable and widespread. They have created a new system that efficiently captures CO2—the least costly to date—and converts it into one of the world’s most widely used chemicals: methanol.
Snaring CO2 before it floats into the atmosphere is a key component in slowing global warming. Creating incentives for the largest emitters to adopt carbon capture technology, however, is an important precursor. The high cost of commercial capture technology is a longstanding barrier to its widespread use.
PNNL scientists believe methanol can provide that incentive. It holds many uses as a fuel, solvent, and an important ingredient in plastics, paint, construction materials and car parts. Converting CO2 into useful substances like methanol offers a path for industrial entities to capture and repurpose their carbon.
PNNL chemist David Heldebrant, who leads the research team behind the new technology, compares the system to recycling. Just as one can choose between single-use and recyclable materials, so too can one recycle carbon.
“That’s essentially what we’re trying to do here,” said Heldebrant. “Instead of extracting oil from the ground to make these chemicals, we’re trying to do it from CO2 captured from the atmosphere or from coal plants, so it can be reconstituted into useful things. You’re keeping carbon alive, so to speak, so it’s not just ‘pull it out of the ground, use it once, and throw it away.’ We’re trying to recycle the CO2, much like we try to recycle other things like glass, aluminum and plastics.”
As described in the journal Advanced Energy Materials, the new system is designed to fit into coal-, gas-, or biomass-fired power plants, as well as cement kilns and steel plants. Using a PNNL-developed capture solvent, the system snatches CO2 molecules before they’re emitted, then converts them into useful, sellable substances.
A long line of dominoes must fall before carbon can be completely removed or entirely prevented from entering Earth’s atmosphere. This effort—getting capture and conversion technology out into the world—represents some of the first few crucial tiles.
Deploying this technology will reduce emissions, said Heldebrant. But it could also help stir the development of other carbon capture technology and establish a market for CO2-containing materials. With such a market in place, carbon seized by anticipated direct air capture technologies could be better reconstituted into longer-lived materials.
The call for cheaper carbon capture
In April 2022, the Intergovernmental Panel on Climate Change issued its Working Group III report focused on mitigating climate change. Among the emissions-limiting measures outlined, carbon capture and storage was named as a necessary element in achieving net zero emissions, especially in sectors that are difficult to decarbonize, like steel and chemical production.
“Reducing emissions in industry will involve using materials more efficiently, reusing and recycling products and minimizing waste,” the IPCC stated in a news release issued alongside one of the report’s 2022 installments. “In order to reach net zero CO2 emissions for the carbon needed in society (e.g., plastics, wood, aviation fuels, solvents, etc.),” the report reads, “it is important to close the use loops for carbon and carbon dioxide through increased circularity with mechanical and chemical recycling.”
PNNL’s research is focused on doing just that—in alignment with DOE’s Carbon Negative Shot. By using renewably sourced hydrogen in the conversion, the team can produce methanol with a lower carbon footprint than conventional methods that use natural gas as a feedstock. Methanol produced via CO2 conversion could qualify for policy and market incentives intended to drive adoption of carbon reduction technologies.
Methanol is among the most highly produced chemicals in existence by volume. Known as a “platform material,” its uses are wide ranging. In addition to methanol, the team can convert CO2 into formate (another commodity chemical), methane and other substances.
A significant amount of work remains to optimize and scale this process, and it may be several years before it is ready for commercial deployment. But, said Casie Davidson, manager for PNNL’s Carbon Management and Fossil Energy market sector, displacing conventional chemical commodities is only the beginning. “The team’s integrated approach opens up a world of new CO2 conversion chemistry. There’s a sense that we’re standing on the threshold of an entirely new field of scalable, cost-effective carbon tech. It’s a very exciting time.”
Crumbling costs
Commercial systems soak up carbon from flue gas at roughly $46 per metric ton of CO2, according to a DOE analysis. The PNNL team’s goal is to continually chip away at costs by making the capture process more efficient and economically competitive.
The team brought the cost of capture down to $47.10 per metric ton of CO2 in 2021. A new study described in the Journal of Cleaner Production explores the cost of running the methanol system using different PNNL-developed capture solvents, and that figure has now dropped to just below $39 per metric ton of CO2.
“We looked at three CO2-binding solvents in this new study,” said chemical engineer Yuan Jiang, who led the assessment. “We found that they capture over 90 percent of the carbon that passes through them, and they do so for roughly 75 percent of the cost of traditional capture technology.”
Different systems can be used depending on the nature of the plant or kiln. But, no matter the setup, solvents are central. In these systems, solvents wash over CO2-rich flue gas before it’s emitted, leaving behind CO2 molecules now bound within that liquid.
Creating methanol from CO2 is not new. But the ability to both capture carbon and then convert it into methanol in one continuously flowing system is. Capture and conversion has traditionally occurred as two distinct steps, separated by each process’s unique, often non-complementary chemistry.
“We’re finally making sure that one technology can do both steps and do them well,” said Heldebrant, adding that traditional conversion technology typically requires highly purified CO2. The new system is the first to create methanol from “dirty” CO2.
Dialing down tomorrow’s emissions
The process of capturing CO2 and converting it to methanol is not CO2-negative. The carbon in methanol is released when burned or sequestered when methanol is converted to substances with longer lifespans. But this technology does “set the stage,” Heldebrant said, for the important work of keeping carbon bound inside material and out of the atmosphere.
Other target materials include polyurethanes, which are found in adhesives, coatings, and foam insulation, and polyesters, which are widely used in fabrics for textiles. Once researchers finalize the chemistry behind converting CO2 into materials that keep it out of the atmosphere for climate-relevant timescales, a wide web of capture systems could be poised to run such reactions.
In lieu of today’s smokestacks, Heldebrant envisions CO2 refineries built into or alongside power plants, where CO2-containing products can be made on site. “We are at a turning point,” Heldebrant and his coauthors wrote in a recent article published in the journal Chemical Science, “where we can continue to use 20th century, monolithic capture and conversion infrastructure or we can begin the transition to a new 21st century paradigm of integrated solvent-based carbon capture and conversion technologies.”
This technology is available for licensing. Please contact Sara Hunt, PNNL commercialization manager, to learn more.
Original Article: Scientists Unveil Least Costly Carbon Capture System to Date
More from: Pacific Northwest National Laboratory
The Latest Updates from Bing News
Go deeper with Bing News on:
Carbon capture
- Varcoe: Major carbon capture projects in Alberta face 'serious risk' if government-industry talks remain gridlocked
Who should be doing more heavy lifting to ensure major carbon capture and storage projects take off in Alberta after one high-profile development failed to launch? Over the past week, the blame game ...
- Microsoft signs 3.33 million-tonne carbon capture deal in Sweden
Microsoft has signed the world’s largest carbon capture deal to date. Stockholm Exergi this week announced that it has signed a contract with the cloud company to remove carbon from an upcoming ...
- ExxonMobil eager for US government to finalise rules on offshore carbon capture and storage
An ExxonMobil executive has reiterated that the US should be taking a global leadership role in carbon capture and storage solutions, and is hopeful that a much-needed regulatory framework for ...
- Carbon Clean achieves fabrication milestone with major eMethanol project’s first carbon-capture unit module
Carbon Clean (London) has achieved a fabrication milestone on Ørsted’s FlagshipONE project, Europe’s largest commercial-scale eMethanol facility under ...
- Microsoft Strikes Major Carbon Capture Deal to Combat Climate Change
Microsoft and Stockholm Exergi are advancing this concept by integrating technology into the power plant to capture a significant portion of its carbon dioxide emissions before they are released into ...
Go deeper with Bing News on:
Methanol from CO2
- A leap toward carbon neutrality: New catalyst converts carbon dioxide to methanol
Researchers at the University of Michigan have developed a catalyst material known as cobalt phthalocyanine that converts carbon dioxide—a significant driver of climate change—into renewable fuels ...
- Best computer speakers 2024: Top desktop models tested and rated
Adding one of the best computer speakers to your desktop is a great way to build a dynamic and entertaining workspace for yourself and the whole family to enjoy. In much the same way as the best ...
- Panel detects methanol misuse in Derabassi unit
The committee was led by Derabassi sub-divisional magistrate (SDM) Himanshu Gupta. The factory, Power Chem Tech, produces formaldehyde by using methanol as raw material. But the unit failed to ...
- Tigist Assefa: “I think I’m capable of running a sub-2:10 marathon”
The women’s world marathon record-holder believes she can go even faster than her best mark of 2:11:53 Tigist Assefa, the fastest female marathon runner in history, believes she can go even quicker.
- Celanese (CE) Achieves Milestones in the Acetyl Chain Business
The resulting low-carbon methanol facilitates the production of ... digital and administrative sub-initiatives to drive enhanced profitability and efficiency. For the second quarter of fiscal ...