Abstract illustration of atoms passing through water and an electrified membrane under a shining sun.
Illustration: Meenesh Singh.
A team of researchers led by Meenesh Singh at University of Illinois Chicago has discovered a way to convert 100% of carbon dioxide captured from industrial exhaust into ethylene, a key building block for plastic products.
Their findings are published in Cell Reports Physical Science.
While researchers have been exploring the possibility of converting carbon dioxide to ethylene for more than a decade, the UIC team’s approach is the first to achieve nearly 100% utilization of carbon dioxide to produce hydrocarbons. Their system uses electrolysis to transform captured carbon dioxide gas into high purity ethylene, with other carbon-based fuels and oxygen as byproducts.
The process can convert up to 6 metric tons of carbon dioxide into 1 metric ton of ethylene, recycling almost all carbon dioxide captured. Because the system runs on electricity, the use of renewable energy can make the process carbon negative.
According to Singh, his team’s approach surpasses the net-zero carbon goal of other carbon capture and conversion technologies by actually reducing the total carbon dioxide output from industry. “It’s a net negative,” he said. “For every 1 ton of ethylene produced, you’re taking 6 tons of CO2 from point sources that otherwise would be released to the atmosphere.”
Previous attempts at converting carbon dioxide into ethylene have relied on reactors that produce ethylene within the source carbon dioxide emission stream. In these cases, as little as 10% of CO2 emissions typically converts to ethylene. The ethylene must later be separated from the carbon dioxide in an energy-intensive process often involving fossil fuels.
In UIC’s approach, an electric current is passed through a cell, half of which is filled with captured carbon dioxide, the other half with a water-based solution. An electrified catalyst draws charged hydrogen atoms from the water molecules into the other half of the unit separated by a membrane, where they combine with charged carbon atoms from the carbon dioxide molecules to form ethylene.
Among manufactured chemicals worldwide, ethylene ranks third for carbon emissions after ammonia and cement. Ethylene is used not only to create plastic products for the packaging, agricultural and automotive industries, but also to produce chemicals used in antifreeze, medical sterilizers and vinyl siding for houses.
Ethylene is usually made in a process called steam cracking that requires enormous amounts of heat. Cracking generates about 1.5 metric tons of carbon emissions per ton of ethylene created. On average, manufacturers produce around 160 million tons of ethylene each year, which results in more than 260 million tons of carbon dioxide emissions worldwide.
In addition to ethylene, the UIC scientists were able to produce other carbon-rich products useful to industry with their electrolysis approach. They also achieved a very high solar energy conversion efficiency, converting 10% of energy from the solar panels directly to carbon product output. This is well above the state-of-the-art standard of 2%. For all the ethylene they produced, the solar energy conversion efficiency was around 4%, approximately the same rate as photosynthesis.
Original Article: A breakthrough discovery in carbon capture conversion for ethylene production
More from: University of Illinois at Chicago
The Latest Updates from Bing News
Go deeper with Bing News on:
CO2 to ethylene
- University of Michigan researchers leap toward carbon neutrality converting CO2 to methanol
Ann Arbor, MI – Researchers at the University of Michigan have developed a catalyst material known as cobalt phthalocyanine that converts carbon dioxide—a significant driver of climate change—into ...
- Q1 2024 Lanzatech Global Inc Earnings Call
Jeffrey Campbell; Analyst; Seaport Research Partners Steve Byrne; Analyst; Bank of America ...
- Honeywell launches NEP technology to reduce CO2 emissions in olefin production
Ethane and propane, essential feedstocks for producing ethylene and propylene, are key petrochemicals used in the production of chemicals, plastics, and fibers. This innovation aligns Honeywell’s ...
- Honeywell’s NEP process: A leap forward in clean olefin production
Honeywell's NEP process boosts olefin production efficiency, slashes CO2 emissions, revolutionizes petrochemical industry. Honeywell's NEP process: A leap forward in clean olefin production. Honeywell ...
- Cheap Catalyst Made Out of Sugar Has the Power To Destroy CO2
New catalyst may provide a potential solution for utilizing captured carbon. A new catalyst made from an inexpensive, abundant metal and common table sugar has the power to destroy carbon dioxide (CO2 ...
Go deeper with Bing News on:
Carbon capture conversion
- Questerre reports first quarter 2024 results
THIS NEWS RELEASE IS NOT FOR DISSEMINATION OR DISTRIBUTION IN THE UNITED STATES OF AMERICATO UNITED STATES NEWSWIRE SERVICES OR UNITED STATES ...
- One-step biomass-to-ethanol conversion tech advances
New Hampshire-based startup Terragia Biofuel has secured funding to proceed with commercializing its comparatively low-cost technology for the conversion of cellulosic biomass into ethanol and other ...
- Research Roundup: NU researchers discover catalyst to remove carbon dioxide, assess hazard maps’ efficacy
While carbon capture technology has made advancements ... The scientists eventually realized that the issue could be traced back to the conversion equations applied to compare the hazard maps with ...
- Seatrium Signs Multi-Year Technology Collaboration Agreement with ABS to Accelerate Decarbonisation and Energy Transition
Seatrium, a global provider of engineering solutions to the offshore, marine, and energy industries, has announced a ...
- Northwestern to Lead Midwestern Carbon-Capture Hub
LanzaTech, a carbon capture and use company that uses synthetic biology to convert waste carbon into materials and higher-value products, will explore uses for the captured carbon. “RepAir Carbon's ...