A stencil-printed paper battery designed to spell out the name of our research institute (“Empa”). The battery can run low-power electronics such as the liquid crystal display (LCD) alarm clock connected to the battery
CREDIT: Empa
Just add a drop of water
The battery, devised by Gustav Nyström and his team, is made of at least one cell measuring one centimeter squared and consisting of three inks printed onto a rectangular strip of paper. Salt, in this case simply sodium chloride or table salt, is dispersed throughout the strip of paper and one of its shorter ends has been dipped in wax. An ink containing graphite flakes, which acts as the positive end of the battery (the cathode), is printed onto one of the flat sides of the paper while an ink containing zinc powder, which acts as the negative end of the battery (the anode), is printed onto the reverse side of the paper. Yet another ink containing graphite flakes and carbon black is printed on both sides of the paper, on top of the other two inks. This ink makes up the current collectors connecting the positive and negative ends of the battery to two wires, which are located at the wax-dipped end of the paper.
When a small amount of water is added, the salts within the paper dissolve and charged ions are released, thus making the electrolyte ionically conductive. These ions activate the battery by dispersing through the paper, resulting in zinc in the ink at the anode being oxidized thereby releasing electrons. By closing the (external) circuit these electrons can then be transferred from the zinc-containing anode – via the graphite- and carbon black-containing ink, the wires and the device – to the graphite cathode where they are transferred to – and hence reduce – oxygen from ambient air. These redox reactions (reduction and oxidation) thus generate an electrical current that can be used to power an external electrical device.
Proof of concept: a sustainable energy source for low-power electronics
To demonstrate the ability of their battery to run low-power electronics, Nyström’s team combined two cells into one battery to increase the operating voltage and used it to power an alarm clock with a liquid crystal display. Analysis of the performance of a one-cell battery revealed that after two drops of water were added, the battery activated within 20 seconds and, when not connected to an energy-consuming device, reached a stable voltage of 1.2 volts. The voltage of a standard AA alkaline battery is 1.5 volts.
After one hour, the one-cell battery’s performance decreased significantly due to the paper drying. However, after the researchers added two extra drops of water, the battery maintained a stable operating voltage of 0.5 volts for more than one additional hour.
The researchers propose that the biodegradability of paper and zinc could enable their battery to minimize the environmental impact of disposable, low-power electronics. “What’s special about our new battery is that, in contrast many metal air batteries using a metal foil that is gradually consumed as the battery is depleted, our design allows to add only the amount of zinc to the ink that is actually needed for the specific application”, says Nyström. Metal foils were more difficult to control and not always fully consumed leading to a waste of materials. So the more zinc the ink contains, the longer the battery is able to operate.
A more critical point of the battery’s current design with water activation, Nyström adds, is the time it takes for the battery to dry out. “But I am sure this can be engineered differently to get around this problem.” For environmental sensing applications at a certain humidity or in wet environments, however, the drying of the paper would not be an issue.
Two complementary technologies
Previously, Nyström’s team had already developed a paper-based degradable super capacitor that could be charged and discharged thousands of times without losing efficiency. Compared to batteries of the same weight, supercapacitors have an energy density that is around 10 times lower – while at the same time having a power density that is around ten to one hundred times greater. Supercapacitors can therefore be charged and discharged much faster. They can also withstand many more charge and discharge cycles. “So the two devices are actually complementary”, says Nyström. The idea behind the new water-activated battery was to be able to manufacture devices that are fully charged and that only release this energy after the triggering of a stimulus, in this case simply a drop of water.
Original Article: A paper battery with water switch
More from: Swiss Federal Laboratories for Materials Science and Technology
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Paper battery
- New 2024 iPads Still Have 10 Hours of Battery Life
The iPad Pro and iPad Air models that Apple introduced today continue to offer the same 10 hours of battery life that Apple has advertised with ...
- Huawei MatePad 11.5in S hands-on review: I prefer it to paper
Display tech helps this slate stand out, but software stumbles mean the MatePad 11.5in S PaperMatte has some early issues ...
- Scientists say new ‘water battery’ can hold more energy than lithium cells
The iodine and bromine-based aqueous battery showed an energy density of 1200 watt-hours per liter, surpassing the 700Wh/L of non-aqueous lithium batteries.
- Former Dodgers pitcher Julio Urías pleads no contest to domestic battery charge
Former Los Angeles Dodgers pitcher Julio Urías pleaded no contest Wednesday to a domestic battery charge stemming from a September arrest.
- Standardized power management could extend EV battery range
The automotive industry is being pushed to establish a standard to manage the power flow to electronic control units that govern different parts of the vehicle depending on the context.
Go deeper with Google Headlines on:
Paper battery
[google_news title=”” keyword=”paper battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Water-activated battery
- Battery-operated boat begins service at Mattupetty hydel tourism centre
all boats under the KHTC will be switched to battery-operated boats,” said the official. According to officials, the shift to electric boats promises to eliminate water, air, and noise pollution ...
- MLGW prepares for overnight severe weather
Memphis, Light, Gas, and Water says it is prepared for any weather-related outages as severe weather is anticipated in the Mid-South overnight. The U.S. National Weather Service says parts of the ...
- 'Smoothest shave ever': This multitasking Schick razor and bikini trimmer is on sale for $19
Nearly 4,000 Amazon shoppers give Schick's two-in-one grooming tool five stars. They like that it's compact and easy to use, calling it everything from a "life-saver" to "an actual miracle." Many say ...
- IFAT Munich 2024: The main event
IFAT Munich is back from 13–17 May 2024, bringing together the global water, sewage, waste and raw materials management sectors over five days in Germany.
- Ryobi's 1600 PSI Pressure Washer Was Discontinued, But They Still Offer These Options
If you discontinue a product as popular as Ryobi's 1600 PSI electric pressure washer, you need to have quality replacements on hand. Here's what's out there.
Go deeper with Google Headlines on:
Water-activated battery
[google_news title=”” keyword=”water-activated battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]