Dust that accumulates on solar panels is a major problem, but washing the panels uses huge amounts of water. MIT engineers have now developed a waterless cleaning method to remove dust on solar installations in water-limited regions, improving overall efficiency.
Image: Courtesy of the researchers
How to clean solar panels without water
Solar power is expected to reach 10 percent of global power generation by the year 2030, and much of that is likely to be located in desert areas, where sunlight is abundant. But the accumulation of dust on solar panels or mirrors is already a significant issue — it can reduce the output of photovoltaic panels by as much as 30 percent in just one month — so regular cleaning is essential for such installations.
But cleaning solar panels currently is estimated to use about 10 billion gallons of water per year — enough to supply drinking water for up to 2 million people. Attempts at waterless cleaning are labor intensive and tend to cause irreversible scratching of the surfaces, which also reduces efficiency. Now, a team of researchers at MIT has devised a way of automatically cleaning solar panels, or the mirrors of solar thermal plants, in a waterless, no-contact system that could significantly reduce the dust problem, they say.
The new system uses electrostatic repulsion to cause dust particles to detach and virtually leap off the panel’s surface, without the need for water or brushes. To activate the system, a simple electrode passes just above the solar panel’s surface, imparting an electrical charge to the dust particles, which are then repelled by a charge applied to the panel itself. The system can be operated automatically using a simple electric motor and guide rails along the side of the panel. The research is described today in the journal Science Advances, in a paper by MIT graduate student Sreedath Panat and professor of mechanical engineering Kripa Varanasi.
Despite concerted efforts worldwide to develop ever more efficient solar panels, Varanasi says, “a mundane problem like dust can actually put a serious dent in the whole thing.” Lab tests conducted by Panat and Varanasi showed that the dropoff of energy output from the panels happens steeply at the very beginning of the process of dust accumulation and can easily reach 30 percent reduction after just one month without cleaning. Even a 1 percent reduction in power, for a 150-megawatt solar installation, they calculated, could result in a $200,000 loss in annual revenue. The researchers say that globally, a 3 to 4 percent reduction in power output from solar plants would amount to a loss of between $3.3 billion and $5.5 billion.
“There is so much work going on in solar materials,” Varanasi says. “They’re pushing the boundaries, trying to gain a few percent here and there in improving the efficiency, and here you have something that can obliterate all of that right away.”
Many of the largest solar power installations in the world, including ones in China, India, the U.A.E., and the U.S., are located in desert regions. The water used for cleaning these solar panels using pressurized water jets has to be trucked in from a distance, and it has to be very pure to avoid leaving behind deposits on the surfaces. Dry scrubbing is sometimes used but is less effective at cleaning the surfaces and can cause permanent scratching that also reduces light transmission.
Water cleaning makes up about 10 percent of the operating costs of solar installations. The new system could potentially reduce these costs while improving the overall power output by allowing for more frequent automated cleanings, the researchers say.
“The water footprint of the solar industry is mind boggling,” Varanasi says, and it will be increasing as these installations continue to expand worldwide. “So, the industry has to be very careful and thoughtful about how to make this a sustainable solution.”
Other groups have tried to develop electrostatic based solutions, but these have relied on a layer called an electrodynamic screen, using interdigitated electrodes. These screens can have defects that allow moisture in and cause them to fail, Varanasi says. While they might be useful on a place like Mars, he says, where moisture is not an issue, even in desert environments on Earth this can be a serious problem.
The new system they developed only requires an electrode, which can be a simple metal bar, to pass over the panel, producing an electric field that imparts a charge to the dust particles as it goes. An opposite charge applied to a transparent conductive layer just a few nanometers thick deposited on the glass covering of the the solar panel then repels the particles, and by calculating the right voltage to apply, the researchers were able to find a voltage range sufficient to overcome the pull of gravity and adhesion forces, and cause the dust to lift away.
Using specially prepared laboratory samples of dust with a range of particle sizes, experiments proved that the process works effectively on a laboratory-scale test installation, Panat says. The tests showed that humidity in the air provided a thin coating of water on the particles, which turned out to be crucial to making the effect work. “We performed experiments at varying humidities from 5 percent to 95 percent,” Panat says. “As long as the ambient humidity is greater than 30 percent, you can remove almost all of the particles from the surface, but as humidity decreases, it becomes harder.”
Varanasi says that “the good news is that when you get to 30 percent humidity, most deserts actually fall in this regime.” And even those that are typically drier than that tend to have higher humidity in the early morning hours, leading to dew formation, so the cleaning could be timed accordingly.
“Moreover, unlike some of the prior work on electrodynamic screens, which actually do not work at high or even moderate humidity, our system can work at humidity even as high as 95 percent, indefinitely,” Panat says.
In practice, at scale, each solar panel could be fitted with railings on each side, with an electrode spanning across the panel. A small electric motor, perhaps using a tiny portion of the output from the panel itself, would drive a belt system to move the electrode from one end of the panel to the other, causing all the dust to fall away. The whole process could be automated or controlled remotely. Alternatively, thin strips of conductive transparent material could be permanently arranged above the panel, eliminating the need for moving parts.
By eliminating the dependency on trucked-in water, by eliminating the buildup of dust that can contain corrosive compounds, and by lowering the overall operational costs, such systems have the potential to significantly improve the overall efficiency and reliability of solar installations, Varanasi says.
Original Article: How to clean solar panels without water
More from: Massachusetts Institute of Technology
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Cleaning solar panels
- Ryan Huebsch and Peder Mewis: 3 transmission lines will bolster clean energy in Wisconsin
Wisconsin dominates U.S. cheese production, is a leading beer producer and exports ethanol. With the help of a few power lines, the Badger State also could become a major clean ...
- Analysis of clean technologies: solar photovoltaic, wind energy, batteries, electrolyzers and heat pumps
Notes: RoW = Rest of world. Solar PV includes facilities producing polysilicon, wafers, cells and modules; Batteries includes facilities producing packs and cells, anodes and cathodes; Wind includes ...
- Use solar power, kill a tortoise? Climate change solution carries environmental costs
Solar power, widely seen as humanity’s best hope for avoiding catastrophic climate change, can carry a heavy environmental cost, depending on where panels and transmission lines are built.
- Why Clean Energy Stocks Collapsed This Week
According to data provided by S&P Global Market Intelligence, shares of Nikola Corp ( NKLA -6.77%) fell as much as 16.7% this week, FuelCell Energy ( FCEL -5.21%) dropped 21.1%, and Sunnova Energy ( ...
- U.S. clean energy industry surpassed 100 GW of installed solar capacity in Q1 2024
This year has already brought major milestones for the U.S. clean energy industry, with solar topping 100 GW at utility-scale, 5.6 GW of new clean power added in the first quarter and the first ...
Go deeper with Google Headlines on:
Cleaning solar panels
[google_news title=”” keyword=”cleaning solar panels” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Electrostatic repulsion
- NanoBrook ZetaPALS Potential Analyzer from Brookhaven Instruments
Electrostatic repulsion of colloidal particles is often the key to understanding the stability of any dispersion. A simple, easy measurement of the electrophoretic mobility "even in nonpolar ...
- A quantum solid made of electrons: observing the elusive Wigner crystal
In 1934, the physicist Eugene Wigner proposed that, under certain circumstances, the electrostatic repulsion between strongly interacting electrons can break translation and orientation symmetry ...
- Eugene Wigner’s Theoretical Electron Crystal Observed by Scientists for the First Time
Instead, they would be arranged in a Wigner crystal—an orderly structure held together by the electrostatic repulsion among the electrons. After decades of speculation and indirect evidence ...
- Electrostatic Force Microscopy (EFM): Probing Nanoscale Electrical Properties
What is Electrostatic Force Microscopy? Electrostatic Force Microscopy (EFM) is a scanning probe microscopy technique that measures the electrostatic interactions between a conductive probe and a ...
- Is hyaluronic acid as effective as skincare brands claim?
When hylauronic acid interacts with water, its water-loving and water-hating parts lead to electrostatic repulsion. This enables large numbers of hyaluronic acid molecules to form networks, which look ...
Go deeper with Google Headlines on:
Electrostatic repulsion
[google_news title=”” keyword=”electrostatic repulsion” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]