University of Delaware researchers have broken new ground that could bring more environmentally friendly fuel cells closer to commercialization.
UD researchers report hyper-efficient method for removing carbon dioxide from air
University of Delaware engineers have demonstrated a way to effectively capture 99% of carbon dioxide from air using a novel electrochemical system powered by hydrogen.
It is a significant advance for carbon dioxide capture and could bring more environmentally friendly fuel cells closer to market.
The research team, led by UD Professor Yushan Yan, reported their method in Nature Energy on Thursday, February 3.
Game-changing tech for fuel cell efficiency
Fuel cells work by converting fuel chemical energy directly into electricity. They can be used in transportation for things like hybrid or zero-emission vehicles.
Yan, Henry Belin du Pont Chair of Chemical and Biomolecular Engineering, has been working for some time to improve hydroxide exchange membrane (HEM) fuel cells, an economical and environmentally friendly alternative to traditional acid-based fuel cells used today.
But HEM fuel cells have a shortcoming that has kept them off the road — they are extremely sensitive to carbon dioxide in the air. Essentially, the carbon dioxide makes it hard for a HEM fuel cell to breathe.
This defect quickly reduces the fuel cell’s performance and efficiency by up to 20%, rendering the fuel cell no better than a gasoline engine. Yan’s research group has been searching for a workaround for this carbon dioxide conundrum for over 15 years.
A few years back, the researchers realized this disadvantage might actually be a solution — for carbon dioxide removal.
“Once we dug into the mechanism, we realized the fuel cells were capturing just about every bit of carbon dioxide that came into them, and they were really good at separating it to the other side,” said Brian Setzler, assistant professor for research in chemical and biomolecular engineering and paper co-author.
While this isn’t good for the fuel cell, the team knew if they could leverage this built-in “self-purging” process in a separate device upstream from the fuel cell stack, they could turn it into a carbon dioxide separator.
“It turns out our approach is very effective. We can capture 99% of the carbon dioxide out of the air in one pass if we have the right design and right configuration,” said Yan.
So, how did they do it?
They found a way to embed the power source for the electrochemical technology inside the separation membrane. The approach involved internally short-circuiting the device.
“It’s risky, but we managed to control this short-circuited fuel cell by hydrogen. And by using this internal electrically shorted membrane, we were able to get rid of the bulky components, such as bipolar plates, current collectors or any electrical wires typically found in a fuel cell stack,” said Lin Shi, a doctoral candidate in the Yan group and the paper’s lead author.
Now, the research team had an electrochemical device that looked like a normal filtration membrane made for separating out gases, but with the capability to continuously pick up minute amounts of carbon dioxide from the air like a more complicated electrochemical system.
In effect, embedding the device’s wires inside the membrane created a short-cut that made it easier for the carbon dioxide particles to travel from one side to the other. It also enabled the team to construct a compact, spiral module with a large surface area in a small volume. In other words, they now have a smaller package capable of filtering greater quantities of air at a time, making it both effective and cost-effective for fuel cell applications. Meanwhile, fewer components mean less cost and, more importantly, provided a way to easily scale up for the market.
The research team’s results showed that an electrochemical cell measuring 2 inches by 2 inches could continuously remove about 99% of the carbon dioxide found in air flowing at a rate of approximately two liters per minute. An early prototype spiral device about the size of a 12-ounce soda can is capable of filtering 10 liters of air per minute and scrubbing out 98% of the carbon dioxide, the researchers said.
Scaled for an automotive application, the device would be roughly the size of a gallon of milk, Setzer said, but the device could be used to remove carbon dioxide elsewhere, too. For example, the UD-patented technology could enable lighter, more efficient carbon dioxide removal devices in spacecraft or submarines, where ongoing filtration is critical.
“We have some ideas for a long-term roadmap that can really help us get there,” said Setzler.
According to Shi, since the electrochemical system is powered by hydrogen, as the hydrogen economy develops, this electrochemical device could also be used in airplanes and buildings where air recirculation is desired as an energy-saving measure. Later this month, following his dissertation defense, Shi will join Versogen, a UD spinoff company founded by Yan, to continue advancing research toward sustainable green hydrogen.
Original Article: SHORT CIRCUIT FOR BIG IMPACT
More from: University of Delaware
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Removing carbon dioxide from air
- The World's Largest CO2 Vacuum Is Here (It Literally Sucks Carbon Dioxide From the Air)
A groundbreaking new structure in Iceland has begun what could be a small yet significant leap in tackling climate change ...
- Research Roundup: NU researchers discover catalyst to remove carbon dioxide, assess hazard maps’ efficacy
Since raising more than $1 billion in research funding in the 2023 fiscal year, Northwestern researchers continue to produce findings in a range of studies. The Daily compiled a summary of NU’s latest ...
- Climeworks Kicks Off Operations at World's Largest Carbon Removal Facility
The Swiss company announced the opening of a new facility in Iceland that will allow it to capture 36,000 tons of CO2 from the atmosphere annually.
- New Iceland Plant Scales Up CO2 Removal From Air
Swiss start-up Climeworks unveils its second plant in Iceland sucking carbon dioxide from the air and stocking it underground, scaling up its capacity tenfold with the aim of eliminating millions of ...
- The world's largest fans designed to suck carbon from the air are up and running in Iceland
Climate tech like carbon removal is becoming more important because the world isn't cutting emissions fast enough.
Go deeper with Google Headlines on:
Removing carbon dioxide from air
[google_news title=”” keyword=”removing carbon dioxide from air” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
CO2 capture
- Glencore seeks Australian carbon capture approval amid farmer protests
Australia's Queensland state will decide this month whether to give Glencore a key approval to bury liquefied carbon dioxide in the country's largest aquifer, a plan farm groups say must be blocked ...
- Is Carbon Capture Cause for Hope?
Lots of people want to see more "hope" and less "doom" about climate change. But a new facility to suck carbon out of the air shows why it's more complicated than that.
- The world’s largest direct carbon capture plant just went online
Climeworks has just opened the world’s largest direct carbon capture plant. It can suck around 36,000 tons of CO2 from the air each year, burying it underground.
- Global Carbon Capture Capacity Quadruples as the Biggest Plant Yet Revs Up in Iceland
The Mammoth plant, built by Climeworks, is powered by geothermal energy and will have a top capacity of 36,000 tons of CO2 a year.
- "Mammoth" carbon capture facility launches in Iceland, expanding one tool in the climate change arsenal
Mammoth, the largest carbon dioxide capture and storage facility of its kind, launched operations this week situated on a dormant volcano in Iceland. The facility adds significant capacity to ...
Go deeper with Google Headlines on:
CO2 capture
[google_news title=”” keyword=”CO2 capture” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]