Microbattery fabricated on the backside of a Si chip by stencil printing Lithium cobalt oxide (LCO) in a cavity in Si followed by assembly and bonding with a glass substrate with a printed graphite layer.
Fitbits, car windows, oil refineries — the roll call of devices and technologies that rely on ultra-small sensors already numbers in the hundreds of billions.
Sensors measure changing conditions and report the data electronically – say, to heat up a bedroom or cool down a nuclear reactor. Sensors with microcircuits are ubiquitous in today’s networks. Some estimates project ten trillion sensors will be in use by 2030.
Ultra-small sensors are powered by their counterparts: ultra-small batteries. As the pace of miniaturization and its applications accelerates, so does the need for ever-smaller sensor batteries that can last a lifetime.
Kristofer Pister, professor of electrical engineering and computer science, leads research to embed microbatteries directly into sensor circuitry, providing a built-in power source instead of an external one. The technology could shrink circuit boards to make the sensor, microprocessor and battery all one unit that can speak to the internet.
The Bakar Fellows Program supports his on-going work to fabricate and print microbatteries within the sensor circuitry itself. Much of the work is also being done by his post-doc, Dr. Anju Toor, who has developed a battery design and fabrication process to print high-capacity batteries. Pister describes the technology and its potential.
Q Besides size, are there other features that make this battery-inside a sensor concept attractive to industry?
A The number one requirement for batteries is connectivity. You have to get the data back to where it needs to go. And you need to do it reliably. The microbatteries we are developing pack a lot of power into a smaller package. They’re also lighter than current batteries and cheaper to produce. Manufacturing them uses the same fabrication and circuit printing technology already used to make trillions of chips.
Q. How are they made?
A The circuitry is stencil printed into cavities on the silicon wafer. You can picture it as etching micro-trenches into the wafer. It’s the same principle as making screen-printed t-shirts. You have a pattern with holes in some areas and not in others. We deposit electrode slurries in the patterned cavities.
Q How small are the batteries?
A The batteries will be about the thickness of three sheets of paper.
Q It seems that you’re creating something inside the box by thinking outside the box. Why do you think your idea of fabricating batteries directly in the sensor circuits had not been devised before?
A. Many people have made ultra-small batteries because they have seen this need coming. I really don’t know why the idea of embedding the batteries has not been thought of before. It has seemed obvious to me for about ten years.
I founded a company called Dust Networks in 2002. We produced ultra-low power wireless networking chips – we call them smart dust – that could function for a decade on the power of a AA battery. They are now deployed worldwide, from oil refineries to parking meters.
As with all microsensors on the market, I had the battery as separate component, and it was all assembled. But it became clear that to miniaturize the sensors further, the right thing to do is to print the batteries on the wafer.
Q. What part does your Spark award play in this development?
A The Bakar Fellows Program support is about bringing the technology to the point that it can be commercialized. In our collaborations with industry up to now, we have been using micro-batteries off the shelf to power sensors. Built-in power sources would be very useful to support applications from the largest oil refineries to medical devices in clinics and in the home, and for personal health monitoring.
They would work very well for wearables, where comfort and appearance are important. As just one example, they are a natural for applications like smart bandages to monitor wound healing by assessing the healing process of the wound environment. We think this batteries-in-a chip design will be part of devices in the full range of commercial spaces.
Original Article: Microbatteries that Make Sense
More from: University of California Berkeley
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Microbatteries
- Ensurge Micropower ASA - Annual Report and Financial Statements 2023on April 25, 2024 at 2:19 am
The Board of Directors of Ensurge Micropower ASA ("Ensurge") approved the annual report and the annual financial statements for 2023 on 24 April 2024. The financial statements are consistent with the ...
- Ensurge Micropower ASA: Ensurge Delivers First Shipment of Solid-State Lithium Microbatteries to Leading Consumer Electronics Companyon April 22, 2024 at 1:13 am
Oslo, April 22, 2023 -- Ensurge Micropower (OSE: ENSU, and OTCQB: ENMPY) ("Ensurge" or the "Company"), today announced it has completed its first shipment of the world's first fully functional ...
- Ensurge Delivers First Shipment of Solid-State Lithium Microbatteries to Leading Consumer Electronics Companyon April 21, 2024 at 10:01 pm
(OSE: ENSU, and OTCQB: ENMPY) (“Ensurge” or the “Company”), today announced it has completed its first shipment of the world’s first fully functional multi-layer solid-state lithium microbatteries.
- Ensurge Micropower ASA (ENMPF)on April 2, 2024 at 4:24 am
Jan. 17, 2024 (GLOBE NEWSWIRE) -- Ensurge Micropower (OSE: ENSU, and OTCQB: ENMPY) (“Ensurge” or the “Company”), a leading provider of solid-state lithium microbatteries for a new ...
- Focus on the development of highly efficient battery systems in the electric two-wheeler sectoron October 23, 2020 at 11:24 am
Wels (pta040/17.03.2021/17:55 UTC+1) PIERER Industrie AG has announced increased cooperation with VARTA AG for the development and production of high-performance two-wheel electric vehicles with ...
Go deeper with Google Headlines on:
Microbatteries
[google_news title=”” keyword=”Microbatteries” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Embedding batteries in sensors
- 4 IoT Trends U.K. Businesses Should Watch in 2024on May 3, 2024 at 10:32 am
With help from Steve Statler, the chief marketing officer at IoT technology provider Wiliot, TechRepublic has identified the top four trends emerging in IoT that U.K. businesses should be aware of: ...
- Seat Occupancy Sensors and Gaming - IDTechEx Explores Printed and Flexible Sensorson May 3, 2024 at 7:52 am
Sensors act as a middle ground between the physical and digital. They measure all sorts of variables from touch, temperature, and heart ...
- vivo Y38 5G quietly goes official with Snapdragon 4 Gen 2 SoC, 6,000 mAh batteryon May 1, 2024 at 5:00 pm
There's a side-mounted fingerprint sensor embedded into the power button, and a huge 6,000 mAh battery too, with support for 44W fast wired charging even. The handset runs Android 14 with vivo's ...
- 'Smart' toilet seat monitors health data to proactively help patients in medical distresson April 30, 2024 at 8:30 pm
A smart toilet, similar to your smart watch, is capable of collecting vital data from your daily use of the toilet seat. This includes heart rate, blood pressure and temperature. The seat is being ...
- You can buy this flame-throwing robot dog for less than $10,000on April 27, 2024 at 12:10 pm
A flame-throwing robot dog is now available to purchase for under $10,000, and it's actually legal in 48 states.
Go deeper with Google Headlines on:
Embedding batteries in sensors
[google_news title=”” keyword=”embedding batteries in sensors” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]