The research breakthrough was achieved by a team led by Professor Yang Hyunsoo (left). Dr Raghav Sharma (right), the first author of the paper, is holding a chip embedded with about 50 spin-torque oscillators.
With the rise of the digital age, the amount of WiFi sources to transmit information wirelessly between devices has grown exponentially. This results in the widespread use of the 2.4GHz radio frequency that WiFi uses, with excess signals available to be tapped for alternative uses.
To harness this under-utilised source of energy, a research team from the National University of Singapore (NUS) and Japan’s Tohoku University (TU) has developed a technology that uses tiny smart devices known as spin-torque oscillators (STOs) to harvest and convert wireless radio frequencies into energy to power small electronics. In their study, the researchers had successfully harvested energy using WiFi-band signals to power a light-emitting diode (LED) wirelessly, and without using any battery.
“We are surrounded by WiFi signals, but when we are not using them to access the Internet, they are inactive, and this is a huge waste. Our latest result is a step towards turning readily-available 2.4GHz radio waves into a green source of energy, hence reducing the need for batteries to power electronics that we use regularly. In this way, small electric gadgets and sensors can be powered wirelessly by using radio frequency waves as part of the Internet of Things. With the advent of smart homes and cities, our work could give rise to energy-efficient applications in communication, computing, and neuromorphic systems,” said Professor Yang Hyunsoo from the NUS Department of Electrical and Computer Engineering, who spearheaded the project.
The research was carried out in collaboration with the research team of Professor Guo Yong Xin, who is also from the NUS Department of Electrical and Computer Engineering, as well as Professor Shunsuke Fukami and his team from TU. The results were published in Nature Communications on 18 May 2021.
Converting WiFi signals into usable energy
Spin-torque oscillators are a class of emerging devices that generate microwaves, and have applications in wireless communication systems. However, the application of STOs is hindered due to a low output power and broad linewidth.
While mutual synchronisation of multiple STOs is a way to overcome this problem, current schemes, such as short-range magnetic coupling between multiple STOs, have spatial restrictions. On the other hand, long-range electrical synchronisation using vortex oscillators is limited in frequency responses of only a few hundred MHz. It also requires dedicated current sources for the individual STOs, which can complicate the overall on-chip implementation.
To overcome the spatial and low frequency limitations, the research team came up with an array in which eight STOs are connected in series. Using this array, the 2.4 GHz electromagnetic radio waves that WiFi uses was converted into a direct voltage signal, which was then transmitted to a capacitor to light up a 1.6-volt LED. When the capacitor was charged for five seconds, it was able to light up the same LED for one minute after the wireless power was switched off.
In their study, the researchers also highlighted the importance of electrical topology for designing on-chip STO systems, and compared the series design with the parallel one. They found that the parallel configuration is more useful for wireless transmission due to better time-domain stability, spectral noise behaviour, and control over impedance mismatch. On the other hand, series connections have an advantage for energy harvesting due to the additive effect of the diode-voltage from STOs.
Commenting on the significance of their results, Dr Raghav Sharma, the first author of the paper, shared, “Aside from coming up with an STO array for wireless transmission and energy harvesting, our work also demonstrated control over the synchronising state of coupled STOs using injection locking from an external radio-frequency source. These results are important for prospective applications of synchronised STOs, such as fast-speed neuromorphic computing.”
Next steps
To enhance the energy harvesting ability of their technology, the researchers are looking to increase the number of STOs in the array they had designed. In addition, they are planning to test their energy harvesters for wirelessly charging other useful electronic devices and sensors.
The research team also hopes to work with industry partners to explore the development of on-chip STOs for self-sustained smart systems, which can open up possibilities for wireless charging and wireless signal detection systems.
Original Article: NUS engineers harvest WiFi signals to power small electronics
More from: National University of Singapore | Tohoku University
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Harvesting WiFi signals
- Putting ChatGPT 4.0 Through Its Paces
Earlier this week, OpenAI announced the latest version of its popular ChatGPT program, designated 4.0. As generative AI continues to progress, OpenAI says has incorporated new functions and improved ...
- New Police Tech Can Detect Phones, Pet Trackers And Library Books In A Moving Car
Italy-based surveillance company Leonardo says its tool creates a fingerprint of drivers and passengers by scanning for anything that emits a signal from their car, from smartphones to library books.
- Harnessing Radio Frequency for Over-Unity Energy: INFRGY's Breakthrough
VMPL New Delhi [India] May 14 INFRGY LLC a startup in India has developed a prototype device that aims to revolutionize energy generation by harnessing radio waves from the environment This innovative ...
- Prototype promising sustainable energy future launched
India-based company INFRGY LLC has launched a prototype device that could revolutionize the energy landscape. This reportedly integrates wireless technology with energy harvesting capabilities, ...
- Telus bolsters network investments, raises quarterly dividend as first-quarter profit down
The investment would cover new infrastructure, technology, operations and spectrum, Telus chief executive Darren Entwistle said ...
Go deeper with Google Headlines on:
Harvesting WiFi signals
[google_news title=”” keyword=”Harvesting WiFi signals” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Energy harvesting
- Innovation in IoT energy harvesting
Technological innovations in the IoT energy harvesting field are continually expanding our possibilities. Firstly, the widespread application of smart sensor technology has significantly optimized ...
- Researchers Boost Energy Output by 4.5% with Reflective Surface Innovation
Researchers from the University of Ottawa have devised a method to amplify solar power generation by an impressive 4.5%.
- Purdue, Wabash National collaborate on composite trailer that recaptures its own energy
An experimental trailer that harvests its own electricity is anticipated to make trailers more sustainable and energy-efficient.
- Energy Harvesting Market Projected to Reach USD 1950 Million by 2033, with a 7.5% CAGR Forecast
The global energy harvesting market is estimated to attain a valuation of USD 940.7 million in 2023 and is projected to reach USD 1950 million by 2033, trailing a CAGR of 7.5% during the forecast ...
- The Evolution Of Solar Energy: How Solar Panels Have Changed Over The Years
The evolution of solar is a long story that hasn't come close to finishing. Here's how solar panels have changed and evolved over the years.
Go deeper with Google Headlines on:
Energy harvesting
[google_news title=”” keyword=”energy harvesting” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]