Jay Guo holds a sheet of flexible transparent conductor on the University of Michigan’s College of Engineering North Campus. The material sandwiches a thin layer of silver between two “dielectric” materials, aluminum oxide and zinc oxide, producing a conductive anti-reflection coating on the sheet of plastic. Photo by Robert Coelius/Michigan Engineering
Michigan Engineers change the game by making a conductive coating that’s also anti-reflective
In an effort to improve large touchscreens, LED light panels and window-mounted infrared solar cells, a team of researchers at the University of Michigan has made plastic conductive while also making it more transparent.
They provide a recipe to help other researchers find the best balance between conductivity and transparency by creating a three-layer anti-reflection surface. The conductive metal layer is sandwiched between two “dielectric” materials that allow light to pass through easily. The dielectrics reduce the reflection from both the plastic and metal layer between them.
“We developed a way to make coatings with high transparency and conductivity, low haze, excellent flexibility, easy fabrication and great compatibility with different surfaces,” said Jay Guo, a professor of electrical engineering and computer science at U-M, who led the work.
Previously, Guo’s team had shown that it was possible to add a layer of metal onto a plastic sheet to make it conductive—a very thin layer of silver that, by itself, reduced the transmission of light by roughly 10%.
Light transmission through plastic is a little lower than through glass, but its transparency can be improved with anti-reflection coatings. Guo and his colleague Dong Liu, a visiting professor to University of Michigan from Nanjing University of Science and Technology, realized that they could make an anti-reflection coating that was also conductive.
“It was taken for granted that the transmittance of the conductor is lower than that of the substrate, but we show that this is not the case,” said Chengang Ji , first author of the paper in Nature Communications, who worked on the project as a PhD student in electrical and computer engineering. Ji received his doctorate from U-M in 2019.
The dielectrics chosen by the team in this case are aluminum oxide and zinc oxide. On the side closest to the light source, the aluminum oxide reflects less light back to the source than the plastic surface would. Then comes the metal layer, composed of silver with a tiny amount of copper in it, just 6.5 nanometers thick, and then zinc oxide helps guide the light into the plastic surface. Some light still gets reflected back where the plastic meets the air on the opposite side, but overall, the light transmission is better than the plastic alone. The transmittance is 88.4% up from 88.1% for the plastic alone.
With the theory results, the team anticipates that other researchers will be able to design similar sandwich-style flexible, highly transparent conductors, which allow even more light through than the plastic alone.
“We tell people how transparent a dielectric-metal-dielectric conductor could be, for a target electrical conductance. We also tell them how to achieve this high transmittance step-by-step,” said Liu.
The tricks are selecting the right dielectrics and then figuring out the right thickness for each to suppress the reflection of the thin metal. In general, the material between the plastic and metal should have a higher refractive index, while the material nearest the display or light source should have a lower refractive index.
Guo is continuing to move the technology forward, collaborating on a project that uses transparent conductors in solar cells for mounting on windows. These could absorb infrared light and convert it to electricity while leaving the visible spectrum to brighten the room. He also proposes large panel interactive displays and car windshields that can melt ice the way rear windows can.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Conductive plastic
- Non-contact based level detector suits water-based liquids
Baumer has created a capacitance-based level detector for water-based liquids. "Capacitive sensing technology offers advantages, especially on ...
- Sumitomo to unveil new press with enhanced injection unit
Suwanee, Ga. — Sumitomo (SHI) Demag Plastics North America (W3343) will unveil its latest all-electric press featuring enhanced injection unit capabilities geared for thin-wall and high-precision ...
- Vishay potentiometers simplify designs and optimize costs for industrial, audio applications
New Yorker Electronics has introduced two new Vishay panel potentiometers featuring integrated knobs and IP67 sealing. Offering a high dielectric strength of 5,000 V AC and power ratings up to 1 W at ...
- What Is Conductive Hearing Loss? Symptoms And Causes
Conductive hearing loss occurs when sound isn’t able to travel efficiently through the outer and/or middle ear to the inner ear. It can happen due to a number of reasons, including blockages in ...
- How To Choose the Right Wire Nuts for Electrical Connections
Below we'll focus on traditional, twist-on wire nuts. Wire nuts consist of two main sections: an outer cap made from non-conductive plastic, and an interior metal spring that serves as the gripping ...
Go deeper with Google Headlines on:
Conductive plastic
[google_news title=”” keyword=”conductive plastic” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Solar windows
- Swedish startup wins EU funding to print organic indoor solar panels
Epishine's organic solar panels harness indoor light to power electronics and Internet of Things (IoT) devices.
- California schools can’t keep pace with utility bills. Solar energy offers a needed lifeline
New regulations made solar installations financially unviable for California school districts where utility bills remain a top budget expense.
- New Virginia law finally brings shared solar to coal country
SOLAR: A new Virginia law will expand community solar into the state’s western coal country, and create an opportunity for regulators to revisit how utilities charge customers for it. (Energy News ...
- Can You Use A Brush On Solar Panels? Cleaning Dos And Don'ts
If you've invested in solar panels, the last thing you want to do is damage them with an incorrect cleaning technique. This is what you need to know.
- IIT Roorkee's Perovskite start-up wins IOCL Start-Up Challenge grant for advancing solar window technology
Perovskite Innovation, India's pioneering start-up specialising in indigenous perovskite solar cells manufacturing, and incubated within the Indian Institute of ...
Go deeper with Google Headlines on:
Solar windows
[google_news title=”” keyword=”solar windows” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]