A new type of material generates electrical current very efficiently from temperature differences. This allows sensors and small processors to supply themselves with energy wirelessly.
Thermoelectric materials can convert heat into electrical energy. This is due to the so-called Seebeck effect: If there is a temperature difference between the two ends of such a material, electrical voltage can be generated and current can start to flow. The amount of electrical energy that can be generated at a given temperature difference is measured by the so-called ZT value: The higher the ZT value of a material, the better its thermoelectric properties.
The best thermoelectrics to date were measured at ZT values of around 2.5 to 2.8. Scientists at TU Wien (Vienna) have now succeeded in developing a completely new material with a ZT value of 5 to 6. It is a thin layer of iron, vanadium, tungsten and aluminium applied to a silicon crystal.
The new material is so effective that it could be used to provide energy for sensors or even small computer processors. Instead of connecting small electrical devices to cables, they could generate their own electricity from temperature differences. The new material has now been presented in the journal “Nature”.
Electricity and Temperature
“A good thermoelectric material must show a strong Seebeck effect, and it has to meet two important requirements that are difficult to reconcile,” says Prof. Ernst Bauer from the Institute of Solid State Physics at TU Wien. “On the one hand, it should conduct electricity as well as possible; on the other hand, it should transport heat as poorly as possible. This is a challenge because electrical conductivity and thermal conductivity are usually closely related.”
At the Christian Doppler Laboratory for Thermoelectricity, which Ernst Bauer established at TU Wien in 2013, different thermoelectric materials for different applications have been studied over the last few years. This research has now led to the discovery of a particularly remarkable material – a combination of iron, vanadium, tungsten and aluminium.
“The atoms in this material are usually arranged in a strictly regular pattern in a so-called face-centered cubic lattice,” says Ernst Bauer. “The distance between two iron atoms is always the same, and the same is true for the other types of atoms. The whole crystal is therefore completely regular”.
However, when a thin layer of the material is applied to silicon, something amazing happens: the structure changes radically. Although the atoms still form a cubic pattern, they are now arranged in a space-centered structure, and the distribution of the different types of atoms becomes completely random. “Two iron atoms may sit next to each other, the places next to them may be occupied by vanadium or aluminum, and there is no longer any rule that dictates where the next iron atom is to be found in the crystal,” explains Bauer.
This mixture of regularity and irregularity of the atomic arrangement also changes the electronic structure, which determines how electrons move in the solid. “The electrical charge moves through the material in a special way, so that it is protected from scattering processes. The portions of charge travelling through the material are referred to as Weyl Fermions,” says Ernst Bauer. In this way, a very low electrical resistance is achieved.
Lattice vibrations, on the other hand, which transport heat from places of high temperature to places of low temperature, are inhibited by the irregularities in the crystal structure. Therefore, thermal conductivity decreases. This is important if electrical energy is to be generated permanently from a temperature difference – because if temperature differences could equilibrate very quickly and the entire material would soon have the same temperature everywhere, the thermoelectric effect would come to a standstill.
Electricity for the Internet of Things
“Of course, such a thin layer cannot generate a particularly large amount of energy, but it has the advantage of being extremely compact and adaptable,” says Ernst Bauer. “We want to use it to provide energy for sensors and small electronic applications.” The demand for such small-scale generators is growing quickly: In the “Internet of Things”, more and more devices are linked together online so that they automatically coordinate their behavior with each other. This is particularly promising for future production plants, where one machine has to react dynamically to another.
“If you need a large number of sensors in a factory, you can’t wire all of them together. It’s much smarter for the sensors to be able to generate their own power using a small thermoelectric device,” says Bauer.
Learn more: New Material Breaks World Record Turning Heat into Electricity
The Latest on: Thermoelectric materials
- It May be Possible to Power Implantable Generators with Our Bodieson May 3, 2024 at 7:30 am
Researchers are trying to solve the problem of powering implantable devices to help improve and save lives.
- Exploiting disorder to harvest heat energy: The potentialities of 2D magnets for thermoelectric applicationson April 29, 2024 at 5:00 pm
In our article, the electrical and thermoelectric transport properties of the 2D antiferromagnet CrSBr are measured, while simultaneously changing the magnetic order of the material by varying the ...
- Department Thermoelectric Materials and Systemson April 19, 2024 at 3:15 am
For optimal use, thermoelectric (TE) materials and modules must be adapted to the requirements of the system where they are integrated. Depending on the temperature range of the application, a ...
- Researchers develop a thermoelectric material with optimal cost, efficiency and flexibilityon March 29, 2024 at 9:19 am
Despite ongoing research and development on various types of bulk and thin-film thermoelectric materials and devices, owing to the advantages of thermoelectric technology, the chronic issue of ...
- Rectifying AI's usage in the quest for thermoelectric materialson March 25, 2024 at 7:55 am
A team of researchers has used AI to identify a thermoelectric material with favorable values. The group was able to navigate AI's conventional pitfalls and big data challenges, offering a prime ...
- Nanostructuring and moreon March 1, 2024 at 10:27 am
In thermoelectric materials, the application of a temperature gradient generates a voltage, and vice versa. By exploiting this coupling between thermal and electrical properties, devices can be ...
- Thermoelectric Material (IMAGE)on July 15, 2022 at 6:43 am
Disclaimer: AAAS and EurekAlert! are not responsible for the accuracy of news releases posted to EurekAlert! by contributing institutions or for the use of any information through the EurekAlert ...
- An inconvenient truth about thermoelectricson November 30, 2021 at 12:56 pm
In 2006, the US Department of Energy's Office of Basic Energy Sciences initiated support to develop improved thermoelectric materials as part of their solar energy project. The idea is simple ...
- Thermoelectric Paint Opens Prospect Of Easier Energy Harvestingon December 10, 2016 at 3:28 pm
The coating is painted on, but then it must be sintered at high temperature to form the final material. Then since the thermoelectric Seebeck effect voltage generated across a junction is tiny ...
via Bing News
The Latest on: Electricity for the Internet of Things
- Thinking Of Buying An Electric Car? Here Are Five Critical Things To Consideron May 6, 2024 at 1:30 pm
Range is one of them and so is your charging situation, but there are a few more things to consider before buying an EV.
- The Role of Smart Grids in Enhancing Electrical Safetyon May 1, 2024 at 12:50 am
The Role of Smart Grids in Enhancing Electrical Safety. How smart grids and IoT technology help prevent electrical incidents and improve safety in the workplace. By Herbert Post; ...
- Why This Document Is More Important Than Your Electricity Rateon April 16, 2024 at 3:43 am
You're looking at internet speeds ... sheet is essential when comparing energy plans since they outline things like electricity rates and charges, contract length, early termination fees, source ...
- This device gathers, stores electricity in remote settingson April 9, 2024 at 2:41 pm
Systems known as the "Internet of Things" (IoT), hold much potential ... How do you power these devices in situations where and when reliable electrical sources are not practically available?
- New device gathers, stores electricity in remote settingson April 8, 2024 at 5:00 pm
Systems known as the "Internet of Things" (IoT), hold much potential ... How do you power these devices in situations where and when reliable electrical sources are not practically available?
- Internet of Things (IoT)on March 15, 2024 at 2:04 am
In 2016, the University of Dayton, in partnership with Emerson Electric, opened The Helix Innovation Center where much of our industrial Internet of Things research is tested. The Helix's full-scale, ...
- Internet of thingson November 22, 2023 at 3:35 am
General Electric has finally found a buyer for ... and other network-connected devices is one of the most advanced Internet-of-things platforms ever seen, researchers said on Wednesday.
- Heating, electricity and internet: how to explain invisible costs to your childon August 21, 2023 at 2:02 am
After all, you pay for them at the till. But how can you explain the costs of heating, electricity and internet to your children? 3 min read Even small children learn that we need to spend money on a ...
- MS in the Internet of Thingson December 22, 2021 at 7:10 am
The master's in IoT requires a total of 45 credits; 12 credits in Internet of Things coursework; 21 credits of electrical engineering elective courses; and the remaining 12 credits can be completed ...
- Exclusive: PTC Vet Kerry Grimes Joins Schneider Electric’s Aveva To Lead Global Partner Programon March 13, 2019 at 8:42 am
Aveva, an industrial software vendor that is majority owned by Schneider Electric, recently hired ... task him with making the industrial Internet of Things player a more "partner-centric company ...
via Bing News