With a few genetic tweaks, a type of soil bacteria with an appetite for hydrocarbons shows promise as a biological factory for converting a renewable — but frustratingly untapped — bounty into a replacement for ubiquitous plastics.
Researchers, like those at the University of Wisconsin–Madison-based, Department of Energy-funded Great Lakes Bioenergy Research Center, hoping to turn woody plants into a replacement for petroleum in the production of fuels and other chemicals have been after the sugars in the fibrous cellulose that makes up much of the plants’ cell walls.
Much of the work of procuring those sugars involves stripping away lignin, a polymer that fills the gaps between cellulose and other chemical components in those cell walls.
That leaves a lot of useful cellulose, but also a lot of lignin — which has never carried much value. Paper mills have been stripping lignin from wood to make paper for more than a century, and finding so little value in the lignin that it’s simply burned in the mills’ boilers.
“They say you can make anything from lignin except money,” says Miguel Perez, a UW–Madison graduate student in civil and environmental engineering.
But they may not know Novosphingobium aromaticivorans as well as he does.
Perez, civil and environmental engineering professor Daniel Noguera and colleagues at GLBRC and the Wisconsin Energy Institute have published in the journal Green Chemistry a strategy for employing N. aromaticivorans to turn lignin into a more valuable commodity.
“Lignin is the most abundant source — other than petroleum — of aromatic compounds on the planet,” Noguera says, like those used to manufacture chemicals and plastics from petroleum. But the large and complex lignin molecule is notoriously hard to efficiently break into useful constituent pieces.
Enter the bacterium, which was first isolated while thriving in soil rich in aromatic compounds after contamination by petroleum products.
Where other microbes pick and choose, N. aromaticivoransis a biological funnel for the aromatics in lignin. It is unique in that it can digest nearly all of the different pieces of lignin into smaller aromatic hydrocarbons.
“Other microbes tried before may be able to digest a few types of aromatics found in lignin,” Perez says. “When we met this microbe, it was already good at degrading a wide range of compounds. That makes this microbe very promising.”
In the course of its digestion process, the microbe turns those aromatic compounds into 2-pyrone-4,6-dicarboxylic acid — more manageably known as PDC. By removing three genes from their microbe, the researchers turned the intermediate PDC into the end of the line. These engineered bacteria became a funnel into which the different lignin pieces go, and out of which PDC flows.
Bioengineers in Japan have used PDC to make a variety of materials that would be useful for consumer products.
“They have found out the compound performs the same or better than the most common petroleum-based additive to PET polymers — like plastic bottles and synthetic fibers — which are the most common polymers being produced in the world,” Perez says.
It would be an attractive plastic alternative — one that would break down naturally in the environment, and wouldn’t leach hormone-mimicking compounds into water — if only PDC were easier to come by.
“There’s no industrial process for doing that, because PDC is so difficult to make by existing routes,” says Noguera. “But if we’re making biofuels from cellulose and producing lignin — something we used to just burn — and we can efficiently turn the lignin into PDC, that potentially changes the market for industrial use of this compound.”
For now, the engineered variation on N. aromaticivorans can turn at least 59 percent of lignin’s potentially useful compounds into PDC. But the new study suggests greater potential, and Perez has targets for further manipulation of the microbe.
“If we can make this pipeline produce at a sufficient rate, with a sufficient yield, we might create a new industry,” Noguera says.
Learn more: Engineered microbe may be key to producing plastic from plants
The Latest on: Lignin
[google_news title=”” keyword=”lignin” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Lignin
- Ask A Nutrition Professional: Does Boiling An Eggplant Peel Change The Percentage Of Lignocellulosic Composition?on May 13, 2024 at 12:36 am
Expert opinion from Livia Dickson Chen PhD in Nutrition · 11 years of experience · Brazil In a quick search, I did not identify heat, in this case boiling, as being a pre-treatment that allows ...
- CSUFT-led team creates novel flame-retardant, smoke-suppressing, and superhydrophobic transparent bamboo for future glasseson May 11, 2024 at 5:00 pm
Professors Yiqiang Wu and Caichao Wan, along with their team from Central South University of Forestry and Technology (CSUFT), have pioneered a groundbreaking transparent material derived from natural ...
- Biomass fuels: challenges and opportunitieson May 10, 2024 at 8:10 am
Biomass, deriving its carbon from atmospheric CO2, is deemed a carbon-neutral fuel (Figure 1). By cycling carbon through energy generation systems as biomass, it offers a means to address climate ...
- Designer peptoids mimic nature's heliceson May 10, 2024 at 5:33 am
Nature is filled with extraordinarily precise molecular shapes that fit together like a hand in glove. Proteins, for example, can assemble into a wide variety of well-defined shapes that grant them ...
- Why Is Breaking Down Plant Material for Biofuels So Slow?on May 8, 2024 at 5:00 pm
But, the researchers said, cellulose’s crystalline structure paired with other compounds called xylan and lignin — also present in cell walls — provide additional challenges to the cellulose breakdown ...
- Functionalized chitosan as a biobased flocculant for the treatment of complex wastewateron May 3, 2024 at 10:50 am
Researchers at the Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB have developed a biobased and functionalized flocculant to efficiently treat complex wastewaters. Furthermore, ...
- Repression of lignin biosynthesis promotes cellulose accumulation and growth in transgenic treeson April 30, 2024 at 5:00 pm
Secondary xylem (wood) of trees, from which pulp is derived, is composed of cellulose (β-1,4-glucan), lignin (phenolic polymer), and hemicelluloses (heterogeneous polysaccharides) in approximate ...
- Florida researchers just discovered a way to turn CO2 into plasticon April 17, 2024 at 5:00 pm
Could it be the plastic alternative we’ve long been looking for? “We use only 2% of produced lignin for useful applications,” says Hoyong Chung, an associate professor in chemical and ...
- Lignin-based Micro- and Nano-entities: Functionalities and Applicationson April 3, 2024 at 1:41 am
The ongoing research advancements pursue the search for biobased and sustainable alternatives to traditional products, with a focus on circularity, including industrial by-products as raw materials.
- 3D Printing Real Wood With Just Cellulose And Ligninon March 26, 2024 at 9:40 pm
Although the components of wood – cellulose and lignin – are exceedingly cheap and plentiful, combining these into a wood-like structure is not straightforward, despite many attempts to make ...
via Bing News