Scientists from Nanyang Technological University, Singapore (NTU Singapore) have developed a technology where two robots can work in unison to 3D-print a concrete structure.
This method of concurrent 3D-printing, known as swarm printing, paves the way for a team of mobile robots to print even bigger structures in future.
Developed by Assistant Professor Pham Quang Cuong and his team at NTU’s Singapore Centre for 3D Printing, this new multi-robot technology was published in Automation in Construction, a top tier journal for civil engineering. The NTU scientist was also behind the Ikea Bot earlier this year where two robots assembled an Ikea chair in 8 min 55s.
Using a specially formulated cement mix suitable for 3-D printing, this new development will allow for unique concrete designs currently not possible with conventional casting. Structures can also be produced on demand and in a much shorter period.
Currently, 3D-printing of large concrete structures requires huge printers that are larger than the printed objects, which is unfeasible since most construction sites have space constraints.
Having multiple mobile robots that can 3D print in sync means large structures like architectural features and specially-designed facades can be printed anywhere as long as there is enough space for the robots to move around the work site.
The NTU robots 3D-printed a concrete structure measuring 1.86m x 0.46m x 0.13m in eight minutes. It took two days to harden and one week for it to achieve its full strength before it was ready for installation.
“We envisioned a team of robots which can be transported to a work site, print large pieces of concrete structures and then move on to the next project once the parts have been printed,” explained Asst Prof Pham from NTU’s School of Mechanical and Aerospace Engineering.
“This research builds on the knowledge we have acquired from developing a robot to autonomously assemble an Ikea chair. But this latest project is more complex in terms of planning, execution, and on a much larger scale.”
Printing concrete structures concurrently with two mobile robots was a huge challenge, as both robots have to move into place and start printing their parts without colliding into each other.
Printing the concrete structure in segments is also not acceptable, as joints between the two parts will not bond properly if the concrete does not overlap during the printing process.
This multi-step process starts by having the computer map out the design to be printed and assign a specific part of the printing to a robot. It then uses a special algorithm to ensure that each of robot arm will not collide with another during the concurrent printing.
Using precise location positioning, the robots then move into place and print the parts in good alignment, ensuring that the joints between the separate parts are overlapped. Finally, the mixing and pumping of the specialised liquid concrete mix have to be blended evenly and synchronised to ensure consistency.
Professor Chua Chee Kai, Executive Director of the Singapore Centre for 3D Printing said disruptive Industry 4.0 technologies like additive manufacturing, can be advanced even further when combined with other innovative technologies like robotics, AI, materials science and green manufacturing techniques.
“This multiple robot printing project is highly interdisciplinary, requiring roboticists to work with materials scientists to make printable concrete. To achieve the end result of a strong concrete structure, we had to combine their expertise with mechanical engineers and civil engineering experts.”
“Such an innovation demonstrates to the industry what is feasible now, and prove what is possible in the future if we are creative in developing new technologies to augment conventional building and construction methods.”
This research project was supported by the National Research Foundation, Singapore (NRF Singapore) and Sembcorp Design and Construction, one of the key industry research partners of SC3DP.
Moving forward, the NTU research team will look at integrating even more robots to print larger scale structures, optimising printing algorithm for consistent performance and to improve the concrete material for faster curing.
Learn more: NTU Singapore scientists develop smart technology for synchronised 3D printing of concrete
The Latest on: Swarm printing
[google_news title=”” keyword=”swarm printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Swarm printing
- EXCLUSIVE: Iris van Herpen Unveils the World's First 3D-printed Wedding Dresson May 16, 2024 at 10:00 pm
Brazilian tax lawyer Mariana Pavani wore the high-tech creation, which took 41 hours to print, at her wedding in São Paulo on May 11.
- Hives For U.S. Drone Swarms Ready To Deploy This Yearon May 16, 2024 at 3:18 am
The new Hive systems can launch, recover, recharge and relaunch drones with no human intervention so a single operator can handle a whole fleet of drones.
- Swarms of insects invade KELOLAND lake communitieson May 15, 2024 at 3:22 am
LAKE POINSETT, S.D. (KELO) — Swarms of midges have arrived at lakes around KELOLAND. Bug experts say it’s a normal occurrence. However, some people who live on Lake Poinsett say it hasn’t ...
- Nigel Farage hits out at 'absolutely batty' policy that has allowed migrants to swarm inon May 14, 2024 at 11:44 pm
Nigel Farage said he believes UK universities have become “drunk” on foreign money and said it was “absolutely batty” to allow foreign students to bring dependents with them when they come to the UK ...
- Pets and Animalson May 14, 2024 at 7:47 am
It’s afternoon in an East Oakland neighborhood, and there’s a football-sized swarm of honeybees hanging at eye-level in a manzanita bush – the exact level, some might say, where you wouldn ...
- Did You Feel Them? Earthquake Swarm Strikes in Baja California South of Calexicoon May 13, 2024 at 5:47 am
A swarm of earthquakes hit northern Baja California on Sunday morning, with the biggest registering 4.9 magnitude.
- WATCH: Huge protests swarm Malmo ahead of Eurovision finalon May 11, 2024 at 5:39 pm
GB News reporter Charlie Peters has shared his experience at the latest protests in Sweden, ahead of the grand final.Charlie said of the demonstration: "It's turned a bit here in ...
- 'Swarm pilots' will need new tactics—and entirely new training methods: Air Force special-ops chiefon May 10, 2024 at 8:46 am
TAMPA —Experiments with ever-larger drone swarms are revealing a need for new concepts of operations and new ways of training human operators, the Air Force Special Operations Forces Command says.
- Nashville weekend events: Iroquois Steeplechase and moreon May 8, 2024 at 1:07 pm
There's plenty to do around Nashville this weekend, especially if you're into horses, bunnies or celebrating moms. 🏇 Iroquois Steeplechase: A swarm of seersucker suits is heading to Percy Warner Park ...
via Bing News