Cellulose is one of the most abundant and broadly distributed organic compound and industrial by-product on Earth. Yet, despite decades of extensive research, the bottom-up use of cellulose to fabricate 3D objects is still plagued with problems that restrict its practical applications: derivatives with vast polluting effects, used in combination with plastics, lack of scalability and high production cost.
However, researchers from the Singapore University of Technology and Design (SUTD) have recently demonstrated the use of cellulose to sustainably manufacture/fabricate large 3D objects. Their approach diverges from the common association of cellulose with green plants and is inspired by the wall of the fungus-like oomycetes, which is reproduced introducing small amounts of chitin between cellulose fibers. The resulting fungal-like adhesive material(s) (FLAM) are strong, lightweight and inexpensive, and can be molded or processed using woodworking techniques.
This material is completely ecologically sustainable as no organic solvents or synthetic plastics were used to manufacture it. It is scalable and can be reproduced anywhere without specialised facilities. FLAM is also fully biodegradable in natural conditions and outside composting facilities. The cost of FLAM is in the range of commodity plastics and 10 times lower than the cost of common filaments for 3D printing, such as PLA (polylactic acid) and ABS (Acrylonitrile Butadiene Styrene), making it not only more sustainable but also a more cost-effective substitute. The researchers have furthermore developed an additive manufacturing technique specific for the material.
Co-lead of this research, SUTD Assistant Prof Javier Gomez Fernandez, also known for the development of Shrilk said: “We believe this first large-scale additive manufacturing process with the most ubiquitous biological polymers on earth will be the catalyst for the transition to environmentally benign and circular manufacturing models, where materials are produced, used, and degraded in closed regional systems. This reproduction and manufacturing with the material composition found in the oomycete wall, namely unmodified cellulose, small amounts of chitosan –the second most abundant organic molecule on earth — and low concentrated acetic acid, is probably one of the most successful technological achievements in the field of bioinspired materials.”
Co-lead SUTD Assistant Prof Stylianos Dritsas, added: “We believe the results reported here represent a turning point for global manufacturing with broader impact on multiple areas ranging from material science, environmental engineering, automation and the economy. So far we have been focusing on fundamental technology development, and little time has been invested in specific target applications. We are now at the stage of seeking industrial collaborators to bring this technology from the laboratory to the world.”
With the increase in waste and pollution, the urgency for more sustainable manufacturing processes is growing. The establishment of a technology based on unmodified compostable polymers of great abundance that does not require cropland or forest resources, will foster the transition to environmentally benign manufacturing and a sustainable society.
Learn more: Large-scale and sustainable 3-D printing with the most ubiquitous natural material
The Latest on: 3D printing with cellulose
[google_news title=”” keyword=”3D printing with cellulose” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printing with cellulose
- Fallen leaves laser-printed into active sensors for health monitoringon May 10, 2024 at 9:48 am
Researchers find a surprising use of old leaves: turning them into sustainable, disposable, and biodegradable sensors.
- Best 3D printers for 2024on May 5, 2024 at 10:54 pm
The best 3D printers allow you to make all sorts of interesting things from small parts to finished products right from the comfort of your home. However, finding the right 3D printer for your ...
- Scientists develop innovative maleic acid-treated bacterial cellulose gel enhancing bone repairon April 15, 2024 at 8:37 am
Constructing Osteo-Inductive Bio-Ink for 3D Printing Through Hybridization of Gelatin with Maleic Acid Modified Bacterial Cellulose by Regulating Addition Volumes of Maleic Acid Solution ...
- Scientists develop maleic acid-treated bacterial cellulose gel for enhancing bone repairon April 14, 2024 at 5:00 pm
More information: Xucai Wang et al, Constructing Osteo-Inductive Bio-Ink for 3D Printing Through Hybridization of Gelatin with Maleic Acid Modified Bacterial Cellulose by Regulating Addition ...
- 3D PRINTINGon April 9, 2024 at 3:50 pm
Cellulose may become an abundant material to print with, potentially providing a renewable and biodegradable alternative to polymers currently used in 3D printing materials, a new study has found.
- Empa Scientists Pioneer 3D Printing of Cellulose-Based Aerogelson April 5, 2024 at 10:13 am
Ultra-light, thermally insulating and biodegradable: Cellulose-based aerogels are versatile. Empa researchers have succeeded in 3D printing the natural material into complex shapes that could one ...
- Biodegradable Aerogel: Airy Cellulose Materials From a 3D Printeron April 4, 2024 at 5:00 pm
As it consists of pure cellulose, the new aerogel is biocompatible with living tissues and cells. Its porous structure is able to absorb drugs and then release them into the body over a long period of ...
- Biodegradable aerogel: Airy cellulose from a 3D printeron April 4, 2024 at 8:18 am
And their cellulose-based, 3D-printable aerogel can ... More than 80% water The flow characteristics of the ink are crucial in 3D printing: It must be viscous enough in order to hold a three ...
- 3D Printing Real Wood With Just Cellulose And Ligninon March 26, 2024 at 9:40 pm
A recent attempt by [MD Shajedul Hoque Thakur] and colleagues as published in Science Advances now may have come closest to 3D printing literal wood using cellulose and lignin ink, using direct ...
via Bing News