The world is a big place, but it’s gotten smaller with the advent of technologies that put people from across the globe in the palm of one’s hand. And as the world has shrunk, it has also demanded that things happen ever faster – including the time it takes to charge an electronic device.
A cross-campus collaboration led by Ulrich Wiesner, the Spencer T. Olin Professor of Engineering in the Department of Materials Science and Engineering, addresses this demand with a novel energy storage device architecture that has the potential for lightning-quick charges.
The group’s idea: Instead of having the batteries’ anode and cathode on either side of a nonconducting separator, intertwine the components in a self-assembling, 3D gyroidal structure, with thousands of nanoscale pores filled with the components necessary for energy storage and delivery.
“This is truly a revolutionary battery architecture,” said Wiesner, whose group’s paper, “Block Copolymer Derived 3-D Interpenetrating Multifunctional Gyroidal Nanohybrid for Electrical Energy Storage,” was published May 16 in Energy and Environmental Science, a publication of the Royal Society of Chemistry.
“This three-dimensional architecture basically eliminates all losses from dead volume in your device,” Wiesner said. “More importantly, shrinking the dimensions of these interpenetrated domains down to the nanoscale, as we did, gives you orders of magnitude higher power density. In other words, you can access the energy in much shorter times than what’s usually done with conventional battery architectures.”
How fast is that? Wiesner said that, due to the dimensions of the battery’s elements being shrunk down to the nanoscale, “by the time you put your cable into the socket, in seconds, perhaps even faster, the battery would be charged.”
The architecture for this concept is based on block copolymer self-assembly, which the Wiesner group has employed for years in other devices, including a gyroidal solar cell and a gyroidal superconductor. Joerg Werner, Ph.D. ’15, lead author on this work, had experimented with self-assembling filtration membranes, and wondered if the same principles could be applied to carbon materials for energy storage.
The gyroidal thin films of carbon – the battery’s anode, generated by block copolymer self-assembly – featured thousands of periodic pores on the order of 40 nanometers wide. These pores were then coated with a 10 nanometer-thick, electronically insulating but ion-conducting separator through electropolymerization, which by the very nature of the process produced a pinhole-free separation layer.
That’s vital, since defects like holes in the separator are what can lead to catastrophic failure giving rise to fires in mobile devices such as cellphones and laptops.
The next step is the addition of the cathode material – in this case, sulfur – in an amount that doesn’t quite fill the remainder of the pores. Since sulfur can accept electrons but doesn’t conduct electricity, the final step is backfilling with an electronically conducting polymer – known as PEDOT (poly[3,4-ethylenedioxythiophene]).
While this architecture offers proof of concept, Wiesner said, it’s not without challenges. Volume changes during discharging and charging the battery gradually degrade the PEDOT charge collector, which doesn’t experience the volume expansion that sulfur does.
“When the sulfur expands,” Wiesner said, “you have these little bits of polymer that get ripped apart, and then it doesn’t reconnect when it shrinks again. This means there are pieces of the 3D battery that you then cannot access.”
The group is still perfecting the technique, but applied for patent protection on the proof-of-concept work.
Learn more: Self-assembling 3D battery would charge in seconds
The Latest on: Self-assembling 3D battery
[google_news title=”” keyword=”self-assembling 3D battery” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Self-assembling 3D battery
- From Self-Driving Cars to Electric Vehicles: The Latest in Automotive Innovationon April 29, 2024 at 4:53 am
Buckle up, because the automotive industry is revving up with groundbreaking innovation! From self-driving cars to electric vehicles, the future of transportation is here. Join us as we take a closer ...
- Nature Nanotechnologyon April 25, 2024 at 5:00 pm
The researchers say the new insulin could be ... Self-assembling molecules that spontaneously organize themselves to form complex structures are common in nature. For example, the tough outer ...
- Self-assembly articles from across Nature Portfolioon April 25, 2024 at 5:00 pm
Self-assembly is the process by which an organized structure spontaneously forms from individual components, as a result of specific, local interactions among the components. When the constitutive ...
- The 6 best robot lawn mowers in 2024 are here to make your Roomba jealouson April 18, 2024 at 3:46 pm
Hate mowing your lawn? Well now you can let a robot do it for you. Check out these latest robotic lawn mowers.
- This battery-powered AIO workstation is made from Framework laptop and 3D printed partson April 7, 2024 at 7:28 pm
YouTuber "noisycarlos" has converted his Framework 13 laptop into an interesting, battery-powered all-in ... together something that's super easy to assemble and reproduce. I generally use my ...
- Self-assembly is ready to rollon January 10, 2024 at 9:58 am
In the effort to make better and less expensive optoelectronics devices molecular self-assembly proves to be a solution — in solution. You have full access to this article via your institution.
- In EV battle, Toyota bets on new technology and old-school thinkingon September 19, 2023 at 4:35 am
Toyota has turned to self-propelled assembly lines, massive die casting and even old-fashioned hand polishing as it aims to make up for lost ground in battery electric vehicles. The world’s top ...
- Exploring the benefits and applications of self-assemblyon April 25, 2023 at 10:58 am
In their work, the team used graphene as the model building block, just like a Lego?? piece. By using a combination of 3D printed template and self-assembly technique, the graphene 'Lego pieces' can ...
- Additive Manufacturing For Batteries Of The Future: Will 3D Printing Transform Battery Making?on January 30, 2023 at 5:53 am
Three battery start-ups say manufacturing batteries with 3D printing, also called additive manufacturing, will not only solve the safety issue but deliver more energy-dense and faster charging ...
via Bing News