The method could impact optical imaging, vision correction, and disease diagnosis
A new method to make a low-cost, high-quality lens quickly using a 3D printer has promising potential to create optical imaging lenses, customized contact lenses for correcting distorted vision, or to even turn iPhones into microscopes for disease diagnosis.
Developed by Northwestern Engineering researchers after two years of research, the customized optical component, which is 5 millimeters in height and 5 millimeters in diameter, can be 3D printed in about four hours.
“Up until now, we relied heavily on the time-consuming and costly process of polishing lenses,” said Cheng Sun, associate professor of mechanical engineering and whose lab developed the 3D printing process. “With 3D printing, now you have the freedom to design and customize a lens quickly.”
The research was published on March 24 in Advanced Materials. It includes images taken with the lens connected to an Apple iPhone 6s, including high-quality detailed images of a sunset moth’s wing and a spot on a weevil’s elyta.
Like all 3D printing, creating these lenses involves placing layer upon layer of material. Sun likened building the lens to running a film projector. “Instead of projecting one frame, one image after another, we layer one frame on top of another,” Sun said. “It is like playing a movie in a vertical fashion.”
But when researchers first printed the lens, its curved layers, made of a photo-curable resin, created a visible stepping.
“We realized that the layers on top of each other created surface roughness. The layer thickness is typically 5 microns, while the wavelength of visible light is around 0.5 micron. This creates an optically rough surface,” he said. “That was the bottleneck. The roughness made the lens incapable of clear optics.”
This lead to the group’s simple guiding research question: Can we make the surface smooth without slowing down the printing speed? To solve that challenge, Sun’s group developed a two-step process of layering and polishing.
“First, we used grayscale images to create more transitions between steps,” Sun said. “Then, we coated the surface with the same photo-curable resin. That then forms the meniscus that further smooths the surface.”
The result: a transparent lens with a smooth surface.
“I must have tried more than 100 times to get this just right,” said Xiangfan Chen, a PhD candidate in mechanical engineering and lead author on the study.
This lens, however, is not the first high-quality lens created by 3D printing. German-based company Nanoscribe has developed a high-precision femto-second 3D printer with 150 nanometer precision, but it builds the lens in a point-by-point fashion instead of layering, Sun said.
“It is a time-consuming process. That is their limitation,” he added. “We wanted to make something comparable but faster and with better quality.”
“If you want to make a lens, do you want to make it in two hours or two weeks?” Chen said. “We are very excited about this lens.”
This process could lead to a plethora of new devices with a wide variety of applications in optics and biomedical imaging, Sun said.
Next, the group will experiment in making larger lenses as well as investigating how to integrate the 3D-printed lens with medical devices, such as an endoscope or optical microscope. “These lenses could help detect some genetic disease or cancer,” said Biqin Dong, a post-doctoral fellow focused on biomedical and mechanical engineering, who also worked on the research.
Dong also envisions that these lenses could be used by doctors in underdeveloped areas for diagnostic imaging or by field scientists as portable microscopes. The lens could also be fashioned into a customized contact lens for people with distorted corneas caused by keratoconus. “The contact lens would feature the customized surface, matching it to the shape of the patient’s cornea,” Sun said.
Learn more: New Method Speeds Up 3D Printing of Millimeter-sized Imaging Lenses
The Latest on: Lens created by 3D printing
[google_news title=”” keyword=”lens created by 3D printing” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Lens created by 3D printing
- Europe 3D Printed Wearables Market Overview, Size, Share, Trends, Demand, Research, and Forecast 2024 to 2032on May 14, 2024 at 10:21 pm
and growing technology advancements in 3D printing. Type (Prosthetics, Fitness Trackers, Smart Watches, Orthopedic Implants, Surgical Instruments), Material Type (Plastics & Polymers, Metals & Metal ...
- Engineers develop new 3D printing technologyon May 14, 2024 at 10:25 am
In everything from electronics in cars to the components of commercial airliners are state-of-the-art 3D-printed materials. Their strength and properties depend on what they're made of and how they're ...
- Nature's 3D printer: bristle worms form bristles piece by pieceon May 13, 2024 at 12:34 pm
A new interdisciplinary study led by molecular biologist Florian Raible from the Max Perutz Labs at the University of Vienna provides exciting insights into the bristles of the marine annelid worm ...
- Blurred Light Harnessed to 3D Print High Quality Lenseson May 9, 2024 at 7:00 am
New 3D printing method produces commercial grade microlenses with smooth surfaces, which could advance optical device design. Researchers in Canada have developed a new 3D printing method called ...
- World's biggest 3D printer unveiled in Maine may one day create entire neighborhoodson April 24, 2024 at 9:14 am
ORONO, Maine - The world's largest 3D printer has created a house that can cut construction time and labor. An even larger printer unveiled on Tuesday may one day create entire neighborhoods.
- 3D Printing: The Latest Architecture and Newson April 14, 2024 at 5:00 pm
As an additive manufacturing method, 3D printing has been characterized by ... making it difficult to create complex shapes with smooth curves. However, the team from the Chair of Digital ...
- How Will The Apple Vision Pro AR/VR Headset Boost 3D Printing?on June 1, 2023 at 6:01 am
I have covered 3D printing for 10 years and am Editor ... Meta acquired optics firm Luxexcel with a goal of using its lens printing process to create AR glasses. Luxexcel’s method produces ...
- 3D Printing Your Own Sturdy Lens Capson August 31, 2021 at 9:07 am
The benefit of printing your own lens caps is customization. No matter the oddball size and shape of your lens, when you’re 3D printing your own cap, you can design it to fit. The video also ...
- Metal 3D Printing Is In The Headlines, But Who’s Actually Using It?on September 8, 2020 at 8:52 am
A 3D printer can produce any viable design input into it, with no need to wait (or pay) for tooling to be created as would happen with traditional processes. This has benefited the aftermarket ...
via Bing News