Imagine a bottle of laundry detergent that can sense when you’re running low on soap — and automatically connect to the internet to place an order for more.
University of Washington researchers are the first to make this a reality by 3-D printing plastic objects and sensors that can collect useful data and communicate with other WiFi-connected devices entirely on their own.
With CAD models that the team is making available to the public, 3-D printing enthusiasts will be able to create objects out of commercially available plastics that can wirelessly communicate with other smart devices. That could include a battery-free slider that controls music volume, a button that automatically orders more cornflakes from Amazon or a water sensor that sends an alarm to your phone when it detects a leak.
“Our goal was to create something that just comes out of your 3-D printer at home and can send useful information to other devices,” said co-lead author and UW electrical engineering doctoral student Vikram Iyer. “But the big challenge is how do you communicate wirelessly with WiFi using only plastic? That’s something that no one has been able to do before.”
The system is described in a paper presented Nov. 30 at the Association for Computing Machinery’s SIGGRAPH Conference and Exhibition on Computer Graphics and Interactive Techniques in Asia.
To 3-D print objects that can communicate with commercial WiFi receivers, the team employed backscatter techniques that allow devices to exchange information. In this case, the team replaced some functions normally performed by electrical components with mechanical motion activated by springs, gears, switches and other parts that can be 3-D printed — borrowing from principles that allow battery-free watches to keep time.
Backscatter systems use an antenna to transmit data by reflecting radio signals emitted by a WiFi router or other device. Information embedded in those reflected patterns can be decoded by a WiFi receiver. In this case, the antenna is contained in a 3-D printed object made of conductive printing filament that mixes plastic with copper.
Physical motion — pushing a button, laundry soap flowing out of a bottle, turning a knob, removing a hammer from a weighted tool bench — triggers gears and springs elsewhere in the 3-D printed object that cause a conductive switch to intermittently connect or disconnect with the antenna and change its reflective state.
Information — in the form of 1s and 0s — is encoded by the presence or absence of the tooth on a gear. Energy from a coiled spring drives the gear system, and the width and pattern of gear teeth control how long the backscatter switch makes contact with the antenna, creating patterns of reflected signals that can be decoded by a WiFi receiver.
“As you pour detergent out of a Tide bottle, for instance, the speed at which the gears are turning tells you how much soap is flowing out. The interaction between the 3-D printed switch and antenna wirelessly transmits that data,” said senior author Shyam Gollakota, an associate professor in the Paul G. Allen School of Computer Science & Engineering. “Then the receiver can track how much detergent you have left and when it dips below a certain amount, it can automatically send a message to your Amazon app to order more.”
The team from the UW Networks & Mobile Systems Lab 3-D printed several different tools that were able to sense and send information successfully to other connected devices: a wind meter, a water flow meter and a scale. They also printed a flow meter that was used to track and order laundry soap, and a test tube holder that could be used for either managing inventory or measuring the amount of liquid in each test tube.
They also 3-D printed WiFi input widgets such as buttons, knobs and sliders that can be customized to communicate with other smart devices in the home and enable a rich ecosystem of “talking objects” that can seamlessly sense and interact with their surroundings.
Using a different type of 3-D printing filament that combines plastic with iron, the team also leveraged magnetic properties to invisibly encode static information in 3-D printed objects — which could range from barcode identification for inventory purposes or information about the object that tells a robot how to interact with it.
“It looks like a regular 3-D printed object but there’s invisible information inside that can be read with your smartphone,” said Allen School doctoral student and co-lead author Justin Chan.
Learn more: In first, 3-D printed objects connect to WiFi without electronics
The Latest Bing News on:
3-D printing plastic objects and sensors
- Akron Students Creating Objects Through 3-D Printing Clubon May 9, 2024 at 2:00 pm
Two members of Akron Elementary School’s 3-D printing club, fourth graders Declan Carrothers, left, and Nash Mills, show off objects they’ve made through it. Fourth and fifth grade students are ...
- Laser printing on fallen tree leaves produces sensors for medical and laboratory useon May 9, 2024 at 9:04 am
Fabrication of sensors by 3D printing combines speed, freedom of design, and the possibility of using waste as a substrate. Various results have been obtained in a circular economy mode, whereby ...
- New Plastic Coating Discovery Gives Greater Functionality to 3D Printingon April 17, 2024 at 5:00 pm
Scientists and engineers have developed a new coating for plastic particles that ... “The real benefit of 3D printing or additive manufacturing is in the design and production of bespoke and unique ...
- New plastic coating discovery gives greater functionality to 3D printingon April 17, 2024 at 8:08 am
Scientists and engineers have developed a new coating for plastic ... benefit of 3D printing or additive manufacturing is in the design and production of bespoke and unique objects, but its ...
- New 3D printing method delivers stronger objects, 5 times fasteron March 12, 2024 at 6:02 am
The team looked at dicyclopentadiene, a substance frequently used in paint, varnish, and plastic flame retardant manufacturing. To make it work better in 3D printing, they were able to figure out ...
- 3D PRINTINGon March 24, 2023 at 9:05 am
Known as additive manufacturing, a 3-D printer assembles an object layer by layer using plastic, resin or metal ... projects lined up for 2020. This 3D printing machine works on selective electron ...
- New Approach to 'True' 3D Printing Using Self-Supporting Resinon June 7, 2022 at 5:01 pm
3D printing may print 3D objects but the process itself, which involves layering of materials, is primarily a 2D affair. However, researchers have set out to change that with a new process that they ...
- Just Press Printon March 1, 2020 at 6:46 pm
A 3-D printer works in much the same way as a desktop printer does. Instead of using ink, though, it “prints” in plastic ... of an object and letting a commercial 3-D printing firm do the ...
- 3D Printing Paper — Sort Ofon December 27, 2019 at 2:23 am
[XYZAidan] has a process that can recycle paper into 3D cardboard-like objects. You need a 3D printer ... of paper unless it is glossy or has a plastic coating. You can tear up pieces by ...
- Desktop 3D printers reviewon August 9, 2013 at 12:00 pm
When you hear the word "printer," you probably think of that machine connected to your computer that spits out boarding passes, greeting cards, and photos (sometimes guzzling ink in the process).
The Latest Google Headlines on:
3-D printing plastic objects and sensors
[google_news title=”” keyword=”3-D printing plastic objects and sensors” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Backscatter system
- What’s that?…A fuel cell that harvests energy from…dirt?on April 26, 2024 at 7:10 am
A soil microbial fuel cell where microbes in dirt could power applications which are literally “in the field”.
- CUSTOMS TO PURCHASE 20 SNIFFER DOGS COSTING RM1.9 MLNon April 26, 2024 at 1:01 am
NILAI, April 26 (Bernama) -- The Royal Malaysian Customs Department (JKDM) is in the process of purchasing 20 sniffer dogs and three backscatter scanning machines to ensure more effective efforts in ...
- Scientists demonstrate high-resolution lidar sees birth zone of cloud droplets, a first-ever remote observationon April 24, 2024 at 9:45 am
A team led by atmospheric scientists at the U.S. Department of Energy's Brookhaven National Laboratory has demonstrated the first-ever remote observations of the fine-scale structure at the base of ...
- Dragonfly rotorcraft given green light for mission to Titanon April 16, 2024 at 6:30 pm
For its mission, Dragonfly would fly from one site to the next and use its sensors, including a radiation backscatter system and a mass spectrometer, to study the chemistry of the area.
- Winchcombe meteorite went from ice to fire, smashed through solar systemon April 15, 2024 at 5:14 pm
electron backscatter diffraction ... the mysteries surrounding the elements leading to the formation of our solar system—including the potential origins of the Earth’s water—researchers ...
- Electron Backscatter Diffraction (EBSD): Unveiling the Microstructure of Materials at the Nanoscaleon March 31, 2024 at 8:08 pm
What is Electron Backscatter Diffraction (EBSD)? Electron backscatter diffraction (EBSD), also known as backscatter Kikuchi diffraction (BKD), is a powerful characterization technique used to analyze ...
- Ambient Backscatter Communication Networkson November 2, 2022 at 3:43 pm
Understand the fundamental principles and applications of ambient backscatter technology with this authoritative ... emerging applications, and advanced system models with innovative solutions. This ...
- Backscatter Your Own FM Pirate Radio Stationon March 9, 2017 at 12:39 am
Frequency-modulating this backscatter carrier frequency adds audio (or data) to the product station. One of the cooler tricks that they pull off with this system is to inject a second (stereo ...
- backscatter radaron January 4, 2017 at 4:00 pm
But what is a phased array antenna system? How do they work? With the help of 1024 LEDs we’ll show you.
The Latest Google Headlines on:
Backscatter system
[google_news title=”” keyword=”backscatter system” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]