Previous researchers have used 3D printers to make microfluidics, but not on this scale
Researchers at BYU are the first to 3D-print a viable microfluidic device small enough to be effective at a scale much less than 100 micrometers. Microfluidic devices are tiny chips that can sort out disease biomarkers, cells and other small structures in samples like blood by using microscopic channels incorporated into the devices.
The accomplishment, which is a major breakthrough toward mass-producing the medical diagnostic devices cheaply, is detailed in the latest issue of the academic journal Lab on a Chip. Researchers Greg Nordin, a BYU electrical engineering professor, and Adam Woolley, a BYU chemistry professor, say the key to their innovation was two-fold:
- Building their own 3D printer to print at a much higher resolution
- Using a new, specifically designed, low-cost, custom resin
“Others have 3D-printed fluidic channels, but they haven’t been able to make them small enough for microfluidics,” Nordin said. “So we decided to make our own 3D printer and research a resin that could do it.”
Their work has produced labs on a chip with flow channel cross sections as small as 18 micrometers by 20 micrometers. Previous efforts to 3D-print microfluidic devices have failed to achieve success smaller than 100 micrometers. The researchers’ 3D printer uses a 385 nm LED, which dramatically increases the available selection of UV absorbers for resin formulation compared to 3D printers with 405 nm LEDs.
Nordin said the advantages of 3D printing for microfluidic device fabrication are already well-known and that their method, digital light processing stereolithography (DLP-SLA), is an especially promising lower-cost approach. DLP-SLA uses a micromirror array chip, like those in most consumer projectors, to dynamically create the optical pattern for each layer during layer-by-layer printing of a device.
Researchers say they are laying the foundation for 3D printing to challenge the dominance of conventional methods — soft lithography and hot embossing — of microfluidic prototyping and development.
“We’re deliberately trying to start a revolution in how microfluidic devices are fabricated,” Nordin said.
Woolley’s research interests in microfluidics focus on using lab-on-a-chip devices to detect biomarkers related to preterm birth. To that end, he and Nordin just submitted a proposal to the National Institutes of Health to develop the approach in this paper for preterm birth prediction.
Woolley said the paper represents an improvement of a factor of 100 on the size of features that are now possible in 3D printed microfluidics. It also cuts down on time and hassle: the BYU-authored approach can create a device in 30 minutes’ time and doesn’t require the use of clean rooms — a special lab environment free from dust and other contaminants.
“It’s not just a little step; it’s a huge leap from one size regime to a previously inaccessible size regime for 3D printing,” Woolley said. “It opens up a lot of doors for making microfluidics more easily and inexpensively.”
Learn more: Professors 3D-print first truly microfluidic “lab on a chip” device
The Latest on: 3D printed lab-on-a-chip
[google_news title=”” keyword=”3D printed lab-on-a-chip” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Surface Chemistry and 3D Printingon May 17, 2024 at 7:39 am
Surface chemistry plays a critical role in every stage of 3D printing, from ink manufacturing to deposition, and subsequent processing ...
- Glass sensors 1,000x smaller than sand grain, 3D-printed on optical fiberon May 16, 2024 at 4:13 am
Swedish researchers have managed to 3D print silica glass micro-optics on optic fiber tips as small as a human hair's cross-section.
- Researchers 3D print functional brain tissue with commercial bioprinter and a creative methodon May 15, 2024 at 11:06 am
Scientists at the University of Wisconsin-Madison developed a 3D-printed brain tissue that can grow and function like typical brain tissue.
- Archimedes 3D Printed Engine Will Send the Neutron Rocket Into Space at Least 20 Timeson May 10, 2024 at 5:36 am
Private space company Rocket Lab announced the completion of the first Archimedes rocket engine, the one meant for the Neutron ...
- Speculations on Bambu Lab’s Next 3D Printeron May 9, 2024 at 11:52 am
On Prusa MMU systems the purged material is printed in an adjacent “purge tower” or used as infill. On Bambu Lab systems the purge material is simply ejected as “poop”, which accumulates in a large ...
- A 3D Printer On Every Desk? Why Companies Are Buying More 3D Printerson May 2, 2024 at 4:56 am
Entry-level desktop 3D printers saw record sales in 2023. It’s not the number of machines sold that’s surprising; it’s who’s buying them: businesses.
- Best 3D Printer for 2024on April 23, 2024 at 1:26 am
We've tested and reviewed several models to find the top 3D printers, including options from Prusa, Anycubic, Elegoo, Bambu Lab and more. James has been writing about technology for years but has ...
- Bambu Lab P1S and AMS Combo Review: Affordable, Fast, Multicolor 3D Printing Is Now a Realityon February 8, 2024 at 6:25 pm
The Bambu Lab P1S with AMS combo kit is an affordable 3D printer that can produce stunning multicolor prints. Full-color printing can result in a lot of waste, but the software provides methods to ...
- Stirring Up 3D-Printed Lab Equipmenton July 8, 2023 at 6:26 pm
Magnetic stirrers are a core part of many chemistry labs. They offer many advantages for ensuring the effective mixing of solutions compared to other methods of stirring, including consistency ...
- Why 3D printed food is set to go mainstreamon May 3, 2023 at 3:36 am
But what about home kitchens? 3D food printers are available now, but mainly aimed at commercial use. One printer, for example, costs around €6,000 and is about the size of microwave. It’s ...
via Google News and Bing News