Columbia Engineering researchers are first to reproducibly achieve the current blockade effect using atomically precise molecules at room temperature, a result that could lead to shrinking electrical components and boosting data storage and computing power.
A major goal in the field of molecular electronics, which aims to use single molecules as electronic components, is to make a device where a quantized, controllable flow of charge can be achieved at room temperature. A first step in this field is for researchers to demonstrate that single molecules can function as reproducible circuit elements such as transistors or diodes that can easily operate at room temperature.
A team led by Latha Venkataraman, professor of applied physics and chemistry at Columbia Engineering and Xavier Roy, assistant professor of chemistry (Arts & Sciences), published a study (DOI 10.1038/nnano.2017.156) today in Nature Nanotechnology that is the first to reproducibly demonstrate current blockade—the ability to switch a device from the insulating to the conducting state where charge is added and removed one electron at a time—using atomically precise molecular clusters at room temperature.
Bonnie Choi, a graduate student in the Roy group and co-lead author of the work, created a single cluster of geometrically ordered atoms with an inorganic core made of just 14 atoms—resulting in a diameter of about 0.5 nanometers—and positioned linkers that wired the core to two gold electrodes, much as a resistor is soldered to two metal electrodes to form a macroscopic electrical circuit (e.g. the filament in a light bulb).
The researchers used a scanning tunneling microscope technique that they have pioneered to make junctions comprising a single cluster connected to the two gold electrodes, which enabled them to characterize its electrical response as they varied the applied bias voltage. The technique allows them to fabricate and measure thousands of junctions with reproducible transport characteristics.
“We found that these clusters can perform very well as room-temperature nanoscale diodes whose electrical response we can tailor by changing their chemical composition,” says Venkataraman. “Theoretically, a single atom is the smallest limit, but single-atom devices cannot be fabricated and stabilized at room temperature. With these molecular clusters, we have complete control over their structure with atomic precision and can change the elemental composition and structure in a controllable manner to elicit certain electrical response.”
A number of studies have used quantum dots to produce the similar effects but because the dots are much larger and not uniform in size, due to the nature of their synthesis, the results have not been reproducible—not every device made with quantum dots behaved the same way. The Venkataraman-Roy team worked with smaller inorganic molecular clusters that were identical in shape and size, so they knew exactly—down to the atomic scale—what they were measuring.
“Most of the other studies created single-molecule devices that functioned as single-electron transistors at four degrees Kelvin, but for any real-world application, these devices need to work at room temperature. And ours do,” says Giacomo Lovat, a postdoctoral researcher and co-lead author of the paper. “We’ve built a molecular-scale transistor with multiple states and functionalities, in which we have control over the precise amount of charge that flows through. It’s fascinating to see that simple chemical changes within a molecule, can have a profound influence on the electronic structure of molecules, leading to different electrical properties.”
The team evaluated the performance of the diode through the on/off ratio, which is the ratio between the current flowing through the device when it is switched on and the residual current still present in its “off” state. At room temperature, they observed an on/off ratio of about 600 in single-cluster junctions, higher than any other single-molecule devices measured to date. Particularly interesting was the fact that these junctions were characterized by a “sequential” mode of charge flow; each electron transiting through a cluster junction stopped on the cluster for a while. Usually, in small-molecule junctions, electrons “pushed” through the junction by the applied bias make the leap continuously, from one electrode into the other, so that the number of electrons on the molecule at each instant of time is not well-defined.
“We say the cluster becomes ‘charged’ since, for a short time interval before the transiting electron jumps off into the other metal electrode, it stores one extra charge,” says Roy. “Such sequential, or discrete, conduction mode is due to the cluster’s peculiar electronic structure that confines electrons in strongly localized orbitals. These orbitals also account for the observed ‘current blockade’ regime when a low bias voltage is applied to a cluster junction. The current drops to a very small value at low voltage as electrons in the metal contact don’t have enough energy to occupy one of the cluster orbitals. As the voltage is increased, the first cluster orbital that becomes energetically accessible opens up a viable route for electrons that can now jump on and off the cluster, resulting in consecutive ‘charging’ and ‘discharging’ events. The blockade is lifted, and current starts flowing across the junction.”
The researchers tailored the clusters to explore the impact of compositional change on the clusters’ electrical response and plan to build upon their initial study. They will design improved cluster systems with better electrical performances (e.g. higher on/off current ratio, different accessible states), and increase the number of atoms in the cluster core while maintaining the atomic precision and uniformity of the compound. This would increase the number of energy levels, each corresponding to a certain electron orbit that they can access with their voltage window. Increasing the energy levels would impact the on/off ratio of the device, perhaps also decreasing the power needed for switching on the device if more energy levels become accessible for transiting electrons at low bias voltages.
“Most single-molecule transport investigations have been performed on simple organic molecules because they are easier to work with,” Venkataraman notes. “Our collaborative effort here through the Columbia Nano Initiative bridges chemistry and physics, enabling us to experiment with new compounds, such as these molecular clusters, that may not only be more synthetically challenging, but also more interesting as electrical components.”
Learn more: Single Molecules Can Work as Reproducible Transistors—at Room Temperature
The Latest on: Single molecule electronics
[google_news title=”” keyword=”single molecule electronics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Parenteral Perspectiveson May 15, 2024 at 11:37 am
Exploring innovations, challenges, and future horizons in parenteral drug delivery.
- Could Single Technologies’ 3D Sequencing Deliver the $10 Genome?on May 14, 2024 at 7:13 pm
Single Technologies has developed a confocal-based optical system to sequence a 3D matrix for hugely parallel reactions in three dimensions.
- Making nanopores from nanotubeson May 14, 2024 at 3:35 pm
Moreover, the presence of a single molecule in the nanopore leads to a transient change in the ionic current, and this change can be detected with off-the-shelf electronic equipment. It is ...
- Chemists succeed in synthesizing a molecule first predicted 20 years agoon May 14, 2024 at 9:59 am
The first and the best-known metallocene is "ferrocene," which contains a single iron atom. Today, sandwich complexes can be found in many inorganic chemistry textbooks, and the bonding and electronic ...
- Saarbrücken chemists succeed in synthesizing a molecule first predicted 20 years agoon May 13, 2024 at 5:00 pm
Some 70 years ago in the 1950s, chemists discovered the first metallocenes – organometallic molecules that came to be known as sandwich complexes or sandwich molecules. The name reflects the fact that ...
- Single Board Computerson May 13, 2024 at 5:00 pm
It accepts M.2 2230 or 2242 form factors, to which it can supply up to 3A and transfer data at up to 500Mbyte/s via the Pi’s single PCIe 2.0 channel. Being compliant to the HAT+ specification means ...
- 2D all-organic perovskites: potential use in 2D electronicson May 9, 2024 at 12:09 pm
Perovskites are among the most researched topics in materials science. Recently, a research team has solved an age-old challenge to synthesize all-organic two-dimensional perovskites, extending the ...
- PolyU researchers create 2D all-organic perovskites and demonstrate potential use in 2D electronicson May 9, 2024 at 7:04 am
Moreover, by manipulating the chemical composition of the crystal, valuable electromagnetic properties such as dielectric properties, which finds applications in electronics and capacitors ...
- Researchers create 2D all-organic perovskites and demonstrate potential use in 2D electronicson May 8, 2024 at 5:00 pm
they are single crystalline in two dimensions and can be exfoliated as hexagonal flakes just a few nanometers thick. The solution-processibility of 2D organic perovskites presents exciting ...
- Molecular spintronics using single-molecule magnetson May 7, 2024 at 5:00 pm
single-molecule magnets. Here, we review the first progress in the resulting field, molecular spintronics, which will enable the manipulation of spin and charges in electronic devices containing ...
via Google News and Bing News