Advanced plastics could usher in lighter, cheaper, more energy-efficient product components, including those used in vehicles, LEDs and computers—if only they were better at dissipating heat.
A new technique that can change plastic’s molecular structure to help it cast off heat is a promising step in that direction.
Developed by a team of University of Michigan researchers in materials science and mechanical engineering and detailed in a new study published in Science Advances, the process is inexpensive and scalable.
The concept can likely be adapted to a variety of other plastics. In preliminary tests, it made a polymer about as thermally conductive as glass—still far less so than metals or ceramics, but six times better at dissipating heat than the same polymer without the treatment.
“Plastics are replacing metals and ceramics in many places, but they’re such poor heat conductors that nobody even considers them for applications that require heat to be dissipated efficiently,” said Jinsang Kim, U-M materials science and engineering professor. “We’re working to change that by applying thermal engineering to plastics in a way that hasn’t been done before.”
The process is a major departure from previous approaches, which have focused on adding metallic or ceramic fillers to plastics. This has met with limited success; a large amount of fillers must be added, which is expensive and can change the properties of the plastic in undesirable ways. Instead, the new technique uses a process that engineers the structure of the material itself.
Plastics are made of long chains of molecules that are tightly coiled and tangled like a bowl of spaghetti. As heat travels through the material, it must travel along and between these chains—an arduous, roundabout journey that impedes its progress.
The team—which also includes U-M associate professor of mechanical engineering Kevin Pipe, mechanical engineering graduate researcher Chen Li and materials science and engineering graduate student Apoorv Shanker—used a chemical process to expand and straighten the molecule chains. This gave heat energy a more direct route through the material. To accomplish this, they started with a typical polymer, or plastic. They first dissolved the polymer in water, then added electrolytes to the solution to raise its pH, making it alkaline.
The individual links in the polymer chain—called monomers—take on a negative charge, which causes them to repel each other. As they spread apart, they unfurl the chain’s tight coils. Finally, the water and polymer solution is sprayed onto plates using a common industrial process called spin casting, which reconstitutes it into a solid plastic film.
The uncoiled molecule chains within the plastic make it easier for heat to travel through it. The team also found that the process has a secondary benefit—it stiffens the polymer chains and helps them pack together more tightly, making them even more thermally conductive.
“Polymer molecules conduct heat by vibrating, and a stiffer molecule chain can vibrate more easily,” Shanker said. “Think of a tightly stretched guitar string compared to a loosely coiled piece of twine. The guitar string will vibrate when plucked, the twine won’t. Polymer molecule chains behave in a similar way.”
Pipe says that the work can have important consequences because of the large number of polymer applications in which temperature is important.
“Researchers have long studied ways to modify the molecular structure of polymers to engineer their mechanical, optical or electronic properties, but very few studies have examined molecular design approaches to engineer their thermal properties,” Pipe said. “While heat flow in materials is often a complex process, even small improvements in the thermal conductivities of polymers can have a large technological impact.”
The team is now looking at making composites that combine the new technique with several other heat dissipating strategies to further increase thermal conductivity. They’re also working to apply the concept to other types of polymers beyond those used in this research. A commercial product is likely several years away.
“We’re looking at using organic solvents to apply this technique to non- water soluble polymers,” Li said. “But we believe that the concept of using electrolytes to thermally engineer polymers is a versatile idea that will apply across many other materials.”
Learn more: Heat-conducting plastic could lead to lighter electronics, cars
The Latest on: Heat-conducting plastic
[google_news title=”” keyword=”heat-conducting plastic” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- A US museum curator detained in Turkey over claims of spider smuggling says he has official permitson May 13, 2024 at 8:03 am
Video showed officers searching hand luggage and removing plastic bags that appeared to be packed with dead spiders and scorpions.
- How Aluminium Windows Can Improve Energy Efficiency in Your Homeon May 13, 2024 at 2:39 am
The environmental impact of choosing aluminium windows for your home extends far beyond the immediate surroundings of your living space.
- Stop Putting This in the Microwaveon May 11, 2024 at 2:00 am
Discover the potential link between your child's health and one everyday microwave routine you thought was harmless.
- The US military isn't ready for the coming drone waron May 11, 2024 at 1:00 am
Drone fights worse even than those in Ukraine are the likely future of war, and the US is scrambling to get its troops ready.
- Outdoor Action Guide toon May 10, 2024 at 5:00 pm
Conduction - through direct contact between objects ... Include an aluminum "space" blanket to help prevent radiant heat loss, and wrap the entire ensemble in plastic to protect from wind and water.
- Meet The Founders Making Stylish, Recyclable Drinkwareon May 8, 2024 at 3:25 pm
How Benson Liu and Michael Fun, the founders of Tossware, created the viral plastic drinkware brand that's stylish, shatterproof and recyclable.
- 3 things you should never store in your oven, according to an appliance experton May 8, 2024 at 1:01 am
If you use your oven as kitchen storage, you could be doing your cookware more harm than good. Here’s what an appliance expert recommends.
- Negotiations Heat Up as Nations Clash Over Plastic Treaty in Ottawaon May 7, 2024 at 5:00 pm
OTTAWA—The latest round of negotiations at the Intergovernmental Negotiating Committee on Plastic Pollution (INC-4) concluded in Ottawa on Tuesday, showcasing both progress and sharp ...
- NCDC Conducting Pan-India Surveillance As Extreme Heat Conditions Grip Countryon May 2, 2024 at 3:28 am
The peak period of summer is From April to July. During this period we see a lot of cases revolving around heat stroke. So, the hospitals have been asked to update on such incidents,\" said an ...
- Dozens more arrested at UT-Austin as police use pepper spray, flash bangs to break up protestson April 29, 2024 at 8:59 pm
Arrests resumed Monday at the University of Texas at Austin amid ongoing demonstrations in support of Palestinians. Dozens of protesters gathered on campus where there was a sizable police presence, ...
via Google News and Bing News