Researchers from Case Western Reserve University, Dayton Air Force Research Laboratory and China have developed a new dry adhesive that bonds in extreme temperatures—a quality that could make the product ideal for space exploration and beyond.
The gecko-inspired adhesive loses no traction in temperatures as cold as liquid nitrogen or as hot as molten silver, and actually gets stickier as heat increases, the researchers report.
The research, which builds on earlier development of a single-sided dry adhesive tape based on vertically aligned carbon nanotubes, is published in the journal Nature Communications. As far as the researchers know, no other dry adhesive is capable of working at such temperature extremes.
Liming Dai, professor of macromolecular science and engineering at Case Western Reserve and an author of the study teamed with Ming Xu, a senior research associate at Case School of Engineering and visiting scholar from Huazhong University of Science and Technology; Feng Du, senior research associate in Case Western Reserve’s Department of Macromolecular Science and Engineering; and Sabyasachi Ganguli and Ajit Roy, of the Materials and Manufacturing Directorate, Air Force Research Laboratory.
Vertically aligned carbon nanotubes with tops bundled into nodes replicate the microscopic hairs on the foot of the wall-walking reptile and remain stable from -320 degrees Fahrenheit to 1,832 degrees, the scientists say.
“When you have aligned nanotubes with bundled tops penetrating into the cavities of the surface, you generate sufficient van der Waal’s forces to hold,” Xu said. “The dry adhesive doesn’t lose adhesion as it cools because the surface doesn’t change. But when you heat the surface, the surface becomes rougher, physically locking the nanotubes in place, leading to stronger adhesion as temperatures increase.”
Because the adhesive remains useful over such a wide range of temperatures, the inventors say it is ideally suited for use in space, where the shade can be frigid and exposure to the sun blazing hot.
In addition to range, the bonding agent offers properties that could add to its utility. The adhesive conducts heat and electricity, and these properties also increase with temperature. “When applied as a double-sided sticky tape, the adhesive can be used to link electrical components together and also for electrical and thermal management,” Roy said.
“This adhesive can thus be used as connecting materials to enhance the performance of electronics at high temperatures,” Dai said. “At room temperature, the double-sided carbon nanotube tape held as strongly as commercial tape on various rough surfaces, including paper, wood, plastic films and painted walls, showing potential use as conducting adhesives in home appliances and wall-climbing robots.”
Holding strength
In testing, a double-sided tape made with the carbon nanotubes (CNTs) applied between two layers of copper foil had an adhesive strength of about 37 newtons per cm-2 at room temperature, about the same as a commercial double-sided sticky tape.
Unlike the commercial tape, which loses adhesion as it freezes or is heated, the CNT adhesive maintained its strength down to -320 degrees Fahrenheit. The adhesive strength more than doubled at 785 degrees Fahrenheit and was about six times as strong at 1891 degrees.
Surprised by the increasing adhesive strength, the researchers used a scanning electron microscope to search for the cause. They found that, as the bundled nodes penetrate the surface cavities, the flexible nanotubes no longer remain vertically aligned but collapse into web-like structures. The action appears to enhance the van der Waal’s forces due to an increased contact surface area with the collapsed nanotubes.
Looking further, the researchers found that as the temperature increased above 392 degrees Fahrenheit, the surface of the copper foil became increasingly rough. The bundled ends and collapsed nanotubes appear to penetrate deeper into the heat-induced irregularities in the surface, increasing adhesion. The researchers dub this adhesion mechanism “nano-interlocking.”
The adhesive held strong during hundreds of temperature transition cycles between ambient temperature and -320 degrees then up to 1891 degrees and between the cold extreme and ambient temperature.
Copper foil, which was used for many of the tests to demonstrate the potential for thermal management, is not unique. The surface of many other materials, including polymer films and other metal foils, roughen when heat is applied, making them good targets for this kind of adhesive, the team suggests.
Learn more: Dry adhesive holds in extreme cold, strengthens in extreme heat
The Latest on: Gecko-inspired adhesive
[google_news title=”” keyword=”gecko-inspired adhesive” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Gecko-inspired adhesive
- NTU scientists inspired by snail mucus and gecko feet to create strong adhesiveon April 30, 2024 at 2:02 pm
SINGAPORE - Taking inspiration from dried snail mucus and gecko feet, scientists in Singapore have developed a reusable adhesive that can adhere strongly to rough surfaces, unlike conventional ...
- Google’s DeepMind creates ‘Gecko’, a rigorous new standard for testing AI image generatorson April 28, 2024 at 11:00 pm
In research released on the preprint server arXiv, they introduce a fresh approach called “Gecko” that promises a more comprehensive and reliable way to benchmark this blossoming technology.
- Scientists develop strong yet reusable adhesive from smart materialson April 28, 2024 at 5:00 pm
Fibrillar adhesives with unprecedented adhesion strength, switchability and scalability. National Science Review , 2024; DOI: 10.1093/nsr/nwae106 Cite This Page : ...
- Scientists develop strong yet reusable adhesive from smart materialson April 28, 2024 at 5:00 pm
Scientists from Nanyang Technological University, Singapore (NTU Singapore) have developed a smart, reusable adhesive more than 10 times stronger than a gecko's feet adhesion, pointing the way for ...
- 10 Genius Inventions Inspired by Nature and Animalson April 25, 2024 at 4:00 am
Scientists studied these structures to develop gecko-inspired adhesives. This technology allows for strong yet reversible adhesion without the need for glue or suction. Sharkskin has a unique ...
- International Space Station Astronauts To Test Robotic Octopus Armson April 23, 2024 at 5:00 pm
Reacch’s robotic arms use van der Waals forces to grip objects. Credit: Kall Morris If all goes according to plan, a robotic octopus will be floating around and grabbing objects inside the ...
- Bioinspired Nanomaterials: Learning from Nature for Advanced Applicationson April 1, 2024 at 12:09 am
Bioinspired adhesive nanomaterials, such as gecko-inspired adhesive tapes and robotics grippers, mimic this hierarchical structure using nanofabricated arrays of polymer or carbon nanotube fibers to ...
- Web-Footed Geckoon May 12, 2021 at 3:38 am
The ghostly web-footed gecko is nearly translucent with a pale ... They move surprisingly quickly across the sand, and adhesive pads on their toes make them excellent climbers.
- Science In Action Bio-inspirationon September 21, 2018 at 11:59 am
Designs from the natural world that have inspired material scientists ... renewable surfaces from shedding snakeskin; reusable adhesive tape from gecko feet; Velcro from burdock seeds and suction ...
via Bing News