3-D printing has become a powerful tool for engineers and designers, allowing them to do “rapid prototyping” by creating a physical copy of a proposed design.
But what if you decide to make changes? You may have to go back, change the design and print the whole thing again, perhaps more than once. So Cornell researchers have come up with an interactive prototyping system that prints what you are designing as you design it; the designer can pause anywhere in the process to test, measure and, if necessary, make changes that will be added to the physical model still in the printer.
“We are going from human-computer interaction to human-machine interaction,” said graduate student Huaishu Peng, who described the On-the-Fly-Print system in a paper presented at the 2016 ACM Conference for Human Computer Interaction. Co-authors are François Guimbretière, associate professor of information science; Steve Marschner, professor of computer science; and doctoral student Rundong Wu.
Their system uses an improved version of an innovative “WirePrint” printer developed in a collaboration between Guimbretière’s lab and the Hasso Platner Institute in Potsdam, Germany.
In conventional 3-D printing, a nozzle scans across a stage depositing drops of plastic, rising slightly after each pass to build an object in a series of layers. With the WirePrint technique the nozzle extrudes a rope of quick-hardening plastic to create a wire frame that represents the surface of the solid object described in a computer-aided design (CAD) file. WirePrint aimed to speed prototyping by creating a model of the shape of an object instead of printing the entire solid. The On-the-Fly-Print system builds on that idea by allowing the designer to make refinements while printing is in progress.
The new version of the printer has “five degrees of freedom.” The nozzle can only work vertically, but the printer’s stage can be rotated to present any face of the model facing up; so an airplane fuselage, for example, can be turned on its side to add a wing. There is also a cutter to remove parts of the model, say to give the airplane a cockpit. The nozzle has been extended so it can reach through the wire mesh to make changes inside. A removable base aligned by magnets allows the operator to take the model out of the printer to measure or test to see if it fits where it’s supposed to go, then replace it in the precise original location to resume printing.
The software – a plug-in to a popular CAD program – designs the wire frame and sends instructions to the printer, allowing for interruptions. The designer can concentrate on the digital model and let the software control the printer. Printing can continue while the designer works on the CAD file, but will resume when that work is done, incorporating the changes into the print.
As a demonstration the researchers created a model for a toy airplane to fit into a Lego airport set. This required adding wings, cutting out a cockpit for a Lego pilot and frequently removing the model to see if the wingspan is right to fit on the runway. The entire project was completed in just 10 minutes.
By creating a “low-fidelity sketch” of what the finished product will look like and allowing the designer to redraw it as it develops, the researchers said, “We believe that this approach has the potential to improve the overall quality of the design process.”
Learn more: ‘On-the-fly’ 3-D print system prints what you design, as you design it
The Latest on: Rapid prototyping
[google_news title=”” keyword=”rapid prototyping” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Rapid prototyping
- Optimizing access and utilization in enterprise AI systemson May 20, 2024 at 12:07 am
Data virtualization could be the ticket for Indian industries to optimize operations, making them more flexible and scalable than ever before.
- CloudThat Inaugurates its Center of Generative AI Innovation to Empower Businesseson May 19, 2024 at 11:01 pm
CloudThat is excited to announce the inauguration of its Center of Generative AI Innovation, a powerful space designed to propel businesses forward with cutting-edge GenAI technology.80 per cent of ...
- Innovative 3D printing could improve treatment for cataracts and other eye conditionson May 19, 2024 at 4:10 pm
University of East Anglia researchers have made an advance in ocular device technology with the introduction of a novel resin for 3D printing intraocular devices. This innovation has the potential to ...
- Innovative 3D printing could revolutionise treatment for cataracts and other eye conditionson May 19, 2024 at 4:02 pm
‘Stereolithographic Rapid Prototyping of Clear, Foldable, Non-refractive Intraocular Lens Designs: A Proof-of-Concept Study’ is published in the journal Current Eye Research.
- New bio-resin that can be recycled back to redefine 3D printingon May 18, 2024 at 11:19 am
Researchers from the University of Birmingham have created a new type of resin that can be recycled within an almost fully closed-loop system, allowing products to be broken down into their ...
- Turbocharging Production Cycles: Unlocking the Speed of Innovationon May 17, 2024 at 2:14 pm
In the relentless race of modern commerce, the imperative to swiftly deliver products to market is more pressing than ever. The velocity of production cycles no ...
- AWS Launched Web-Based ‘Amazon Bedrock Studio’ for Rapid Prototyping AI Projectson May 9, 2024 at 10:14 pm
Available in public preview for AWS administrators, the web-based Amazon Bedrock Studio provides a “rapid” prototyping environment, said the company. Bedrock Studio guides developers through the steps ...
- Design and Prototyping Labon October 6, 2021 at 11:53 pm
The Engineering Design and Prototyping Lab is an open-access workspace where approved engineering students can work independently or in teams on class projects or related extracurricular activities.
- Casting and Molding (Rapid Tooling) Rapid Prototyping Serviceson March 17, 2018 at 5:45 pm
Additional Services: Design Assistance; Design Verification Model; Solid Modeling or CAD Services; Functional Prototype; Casting and Molding (Rapid Tooling) Technology Utilized: Three Dimensional ...
- Rapid Prototyping Equipment Informationon February 8, 2018 at 3:10 pm
Rapid prototyping equipment builds models of products before they are mass produced for the marketplace. These physical prototypes can convey more complete information about a product early in the ...
via Bing News