MIT researchers find a way to boost lithium-air battery performance, with the help of modified viruses.
MIT researchers have found a way to boost lithium-air battery performance, with the help of modified viruses.
Lithium-air batteries have become a hot research area in recent years: They hold the promise of drastically increasing power per battery weight, which could lead, for example, to electric cars with a much greater driving range. But bringing that promise to reality has faced a number of challenges, including the need to develop better, more durable materials for the batteries’ electrodes and improving the number of charging-discharging cycles the batteries can withstand.
Now, MIT researchers have found that adding genetically modified viruses to the production of nanowires — wires that are about the width of a red blood cell, and which can serve as one of a battery’s electrodes — could help solve some of these problems.
The new work is described in a paper published in the journal Nature Communications, co-authored by graduate student Dahyun Oh, professors Angela Belcher and Yang Shao-Horn, and three others. The key to their work was to increase the surface area of the wire, thus increasing the area where electrochemical activity takes place during charging or discharging of the battery.
The researchers produced an array of nanowires, each about 80 nanometers across, using a genetically modified virus called M13, which can capture molecules of metals from water and bind them into structural shapes. In this case, wires of manganese oxide — a “favorite material” for a lithium-air battery’s cathode, Belcher says — were actually made by the viruses. But unlike wires “grown” through conventional chemical methods, these virus-built nanowires have a rough, spiky surface, which dramatically increases their surface area.
Belcher, the W.M. Keck Professor of Energy and a member of MIT’s Koch Institute for Integrative Cancer Research, explains that this process of biosynthesis is “really similar to how an abalone grows its shell” — in that case, by collecting calcium from seawater and depositing it into a solid, linked structure.
The increase in surface area produced by this method can provide “a big advantage,” Belcher says, in lithium-air batteries’ rate of charging and discharging. But the process also has other potential advantages, she says: Unlike conventional fabrication methods, which involve energy-intensive high temperatures and hazardous chemicals, this process can be carried out at room temperature using a water-based process.
Also, rather than isolated wires, the viruses naturally produce a three-dimensional structure of cross-linked wires, which provides greater stability for an electrode.
A final part of the process is the addition of a small amount of a metal, such as palladium, which greatly increases the electrical conductivity of the nanowires and allows them to catalyze reactions that take place during charging and discharging. Other groups have tried to produce such batteries using pure or highly concentrated metals as the electrodes, but this new process drastically lowers how much of the expensive material is needed.
Altogether, these modifications have the potential to produce a battery that could provide two to three times greater energy density — the amount of energy that can be stored for a given weight — than today’s best lithium-ion batteries, a closely related technology that is today’s top contender, the researchers say.
Belcher emphasizes that this is early-stage research, and much more work is needed to produce a lithium-air battery that’s viable for commercial production.
Go deeper with Bing News on:
Lithium-air battery
- Ultra-high density battery vests give next-gen soldiers twice the energy
Amprius began shipping its remarkable silicone-anode batteries in 2022, laying claim to the world's highest-density battery cells along the way. It's now focusing attention on a unique use case: a ...
- Khanij Bidesh India likely to acquire lithium asset in Australia in FY25
Khanij Bidesh India Ltd (KABIL) hopes to acquire a lithium block in Australia this year, a top official said on Saturday.
- 'Stop Battery Fires' campaign launched
Recycle Your Electricals and the National Fire Chiefs Council collaborate to raise awareness about correct battery and electrical waste disposal ...
- Batteries News
a group of researchers has created a paper-based magnesium-air battery that can be used in GPS ... New Materials Discovered for Safe, High-Performance Solid-State Lithium-Ion Batteries Apr. 2 ...
- A look at battery-powered aircraft that could lead transition from fossil-fueled flight
Earlier this month, the Federal Aviation Administration approved the first training program in the country for electric aviation. The program is just one part of a small but burgeoning effort to ...
Go deeper with Google Headlines on:
Lithium-air battery
[google_news title=”” keyword=”lithium-air battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Next generation battery
- Rumor: Samsung's Galaxy Z Fold 6 to Feature Advanced 'Battery AI'
Recent rumors have surfaced suggesting that Samsung may integrate its revolutionary Battery AI technology into the Galaxy Z Fold 6, aiming to significantly enhance battery efficiency. Galaxy Z Fold 6: ...
- Ultra-high density battery vests give next-gen soldiers twice the energy
Amprius began shipping its remarkable silicone-anode batteries in 2022, laying claim to the world's highest-density battery cells along the way. It's now focusing attention on a unique use case: a ...
- The next Asus handheld isn’t the ROG Ally 2, but I’m still hyped for a refresh
Rather than releasing a next-gen handheld sequel, the company has confirmed that a revamped version of the original portable is coming, and it’ll apparently combat one of the biggest pitfalls of PC ...
- Dallas-Based Solidion Unveils Solid-State EV Battery Tech That Could ‘Dramatically Reduce’ Battery Weight, Volume, Cost
Solidion Technology's patented bipolar electrode-to-pack (BEEP) tech aims to simplify the design and manufacture of solid-state EV batteries. It does that by requiring only one casing and a small ...
- Batteries News
Drawing Inspiration from Plants: A Metal-Air Paper Battery for Wearable Devices ... 2024 — New research shows that the next generation of lithium-sulphur (Li||S) batteries may be capable of ...
Go deeper with Google Headlines on:
Next generation battery
[google_news title=”” keyword=”next generation battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]