3D printing trials of unmanned aircraft at the University of Sheffield broaden the possibilities for this emergent technology
Engineers at the Advanced Manufacturing Research Centre (AMRC) at the University of Sheffield have successfully printed a 1.5m-wide prototype unmanned aerial vehicle (UAV) for a research project looking at 3D printing of complex designs.
The engineers said the polymer craft could form the basis of cheap and potentially disposable UAVs that could be built and deployed in remote situations potentially within as little as 24 hours.
Earlier versions required significant amounts of support material around component parts to prevent the airframe structures from deforming during the build process. Using support material adds a direct material cost, and significantly increases build time, in some cases by an order of magnitude. This is a result of the machine having to change between build and support structure heads after each printed layer.
New 3D printing techniques, such as the fused deposition modelling (FDM) used to make the UAV at Sheffield, could soon be used in the creation of products without the need for complex and expensive tooling and the time required in traditional manufacturing.
The UAV has already completed a test flight as a glider. Researchers are developing an electric ducted fan propulsion system that will be incorporated into the airframe’s central spine. They plan to develop the craft for guidance by GPS or camera technology, controlled by an operator wearing first person-view goggles.
Dr Garth Nicholson who led the project said: “Following successful flight testing, we are working to incorporate blended winglets and twin ducted fan propulsion. We are also investigating full on-board data logging of flight parameters, autonomous operation by GPS, and control by surface morphing technology. Concepts for novel ducted fan designs are also being investigated”.
The Sheffield UAV comprises nine parts that can be snapped together.
It weighs less than 2kg and is made from thermoplastic. The engineers are currently evaluating the potential of nylon as a printing material that would make the UAV 60 per cent stronger with no increase in weight.
The Latest on: 3D printed UAVs
[google_news title=”” keyword=”3D printed UAVs” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printed UAVs
- Terror accused Artem Vasilyev stands trial charged with plotting terror attack on Cherry Gardens substationon May 8, 2024 at 11:32 pm
An electronics engineer accused of planning a terror attack in South Australia was found with 3D printed firearms and parts, and chemicals used to make explosives, a ...
- Terror accused 'had guns, explosive chemicals'on May 8, 2024 at 10:51 pm
A man accused of plotting to blow up an electrical substation had gun parts, extremist material and explosives ingredients in his home, a court has been told.
- What Is Polaris Dawn? Breaking Down the Upcoming SpaceX Missionon May 8, 2024 at 2:01 pm
The crewed spaceflight, which will launch no earlier than this summer, receives a major boost with the reveal of SpaceX’s new spacesuit.
- 12 types of technology that can make jobsites saferon May 8, 2024 at 11:23 am
Innovations such as wearables, drones and predictive analytics help improve hazard detection and incident prevention.
- Air Force Demos Ability to Create a 3D-Printed Drone in 24 Hourson May 7, 2024 at 1:35 pm
An Air Force team showcased its capability to produce a 3D-printed unmanned aerial system within a 24-hour timeframe.
- US 3D-prints, deploys drones in 24 hrs to boost rapid warfare capabilityon May 4, 2024 at 5:54 am
In a demonstration at Eglin Air Force Base’s B-70 range in Florida, the US Air Force displayed its capacity to design, assemble, and deploy 3D-printed autonomous drones within 24 hours.
- Ukraine’s Homegrown 1 Million Unit Drone Industry Takes Flight With 3D Printingon May 3, 2024 at 7:10 am
Charles R. Goulding and Preeti Sulibhavi explore how grassroots initiatives in Ukraine are leveraging 3D printing to rapidly scale drone production.
- A 3D Printer On Every Desk? Why Companies Are Buying More 3D Printerson May 2, 2024 at 4:56 am
Entry-level desktop 3D printers saw record sales in 2023. It’s not the number of machines sold that’s surprising; it’s who’s buying them: businesses.
- Evolving world of AI humanoidson May 1, 2024 at 7:45 am
“I moved here 10 years ago, and to see all this growth in the tech space, it’s always exciting,” said Paul Oh, Lincy Professor for Unmanned Aerial Systems ... s an outgrowth of robotics. I can do 3D ...
- UAV attack on Myanmar capital part of co-ordinated effort, says officialon April 7, 2024 at 5:00 pm
A resistance attack on Myanmar's administrative capital Naypyidaw on 4 April used domestically produced 3D-printed UAVs such as the aircraft depicted in this 2023 photo. This UAV, which appears to ...
via Bing News