Imagine a bottle of laundry detergent that can sense when you’re running low on soap — and automatically connect to the internet to place an order for more.
University of Washington researchers are the first to make this a reality by 3-D printing plastic objects and sensors that can collect useful data and communicate with other WiFi-connected devices entirely on their own.
With CAD models that the team is making available to the public, 3-D printing enthusiasts will be able to create objects out of commercially available plastics that can wirelessly communicate with other smart devices. That could include a battery-free slider that controls music volume, a button that automatically orders more cornflakes from Amazon or a water sensor that sends an alarm to your phone when it detects a leak.
“Our goal was to create something that just comes out of your 3-D printer at home and can send useful information to other devices,” said co-lead author and UW electrical engineering doctoral student Vikram Iyer. “But the big challenge is how do you communicate wirelessly with WiFi using only plastic? That’s something that no one has been able to do before.”
The system is described in a paper presented Nov. 30 at the Association for Computing Machinery’s SIGGRAPH Conference and Exhibition on Computer Graphics and Interactive Techniques in Asia.
To 3-D print objects that can communicate with commercial WiFi receivers, the team employed backscatter techniques that allow devices to exchange information. In this case, the team replaced some functions normally performed by electrical components with mechanical motion activated by springs, gears, switches and other parts that can be 3-D printed — borrowing from principles that allow battery-free watches to keep time.
Backscatter systems use an antenna to transmit data by reflecting radio signals emitted by a WiFi router or other device. Information embedded in those reflected patterns can be decoded by a WiFi receiver. In this case, the antenna is contained in a 3-D printed object made of conductive printing filament that mixes plastic with copper.
Physical motion — pushing a button, laundry soap flowing out of a bottle, turning a knob, removing a hammer from a weighted tool bench — triggers gears and springs elsewhere in the 3-D printed object that cause a conductive switch to intermittently connect or disconnect with the antenna and change its reflective state.
Information — in the form of 1s and 0s — is encoded by the presence or absence of the tooth on a gear. Energy from a coiled spring drives the gear system, and the width and pattern of gear teeth control how long the backscatter switch makes contact with the antenna, creating patterns of reflected signals that can be decoded by a WiFi receiver.
“As you pour detergent out of a Tide bottle, for instance, the speed at which the gears are turning tells you how much soap is flowing out. The interaction between the 3-D printed switch and antenna wirelessly transmits that data,” said senior author Shyam Gollakota, an associate professor in the Paul G. Allen School of Computer Science & Engineering. “Then the receiver can track how much detergent you have left and when it dips below a certain amount, it can automatically send a message to your Amazon app to order more.”
The team from the UW Networks & Mobile Systems Lab 3-D printed several different tools that were able to sense and send information successfully to other connected devices: a wind meter, a water flow meter and a scale. They also printed a flow meter that was used to track and order laundry soap, and a test tube holder that could be used for either managing inventory or measuring the amount of liquid in each test tube.
They also 3-D printed WiFi input widgets such as buttons, knobs and sliders that can be customized to communicate with other smart devices in the home and enable a rich ecosystem of “talking objects” that can seamlessly sense and interact with their surroundings.
Using a different type of 3-D printing filament that combines plastic with iron, the team also leveraged magnetic properties to invisibly encode static information in 3-D printed objects — which could range from barcode identification for inventory purposes or information about the object that tells a robot how to interact with it.
“It looks like a regular 3-D printed object but there’s invisible information inside that can be read with your smartphone,” said Allen School doctoral student and co-lead author Justin Chan.
Learn more: In first, 3-D printed objects connect to WiFi without electronics
The Latest Bing News on:
3-D printing plastic objects and sensors
- Laser-based sensor promises breakthrough in 3D printingon April 23, 2024 at 5:49 am
New laser-based sensing technology has been revealed and could change the quality assessment of critical metallic components ...
- How a New 3D Printer Automatically Masters Diverse Sustainable Materialson April 23, 2024 at 3:06 am
The advance could help make 3D printing more sustainable, enabling printing with renewable or recyclable materials that are difficult to characterize. While 3D printing has exploded in popularity, ...
- Advancement of 3D Printing with New Plastic Coatingon April 18, 2024 at 9:09 am
In a study published in Nature Communications , researchers from the University of Nottingham ’s School of Chemistry and Faculty of Engineering describe the development of supercritical carbon dioxide ...
- New plastic coating discovery gives greater functionality to 3D printingon April 17, 2024 at 8:08 am
Scientists and engineers have developed a new coating for plastic particles that are used in 3D printing, which significantly increases their functionality and opens up new possibilities for ...
- Stealth Startup Captures Carbon By 3D Printing With Seaweed And Coffee Groundson July 27, 2023 at 6:00 am
But Marvel Labs doesn’t just revitalize waste materials, it captures carbon in the process by 3D printing objects out of biomass ... “You know, 3.7 million tons of wet coffee grounds end ...
- 3D PRINTINGon March 24, 2023 at 9:05 am
Known as additive manufacturing, a 3-D printer assembles an object layer by layer using plastic, resin or metal ... projects lined up for 2020. This 3D printing machine works on selective electron ...
- DuPont Bets On Electronics 3D Printingon March 7, 2022 at 8:43 am
I have covered 3D ... objects. Nearly as important are the dielectric materials that insulate an item from electric charge, thus focusing the energy solely on its intended use. Here, too, 3D ...
- 3D Printing Glasson August 8, 2019 at 9:45 am
For most of us, 3D printing means ... in which the plastic burns away in a high-temperature kiln. The final technique creates an internal void to make it appear an object is inside another object.
- HP Unveils 4 Lower-Cost Jet Fusion 3-D Printers And A New Partner Program To Expand The 3-D Print Channel Opportunityon February 5, 2018 at 6:00 am
vice president of engineering Cameron Carson said that HP "has kept its promise of disrupting the 3-D printing paradigm by introducing the world's first full-color, production-quality plastic ...
- Just Press Print: 3-D Printing At Home Saves Cashon February 13, 2017 at 7:00 am
Pearce estimates that using only the random 26 objects analyzed in the study may have already saved consumers who use 3-D printers at home more ... and all the costs associated with printing—such as ...
The Latest Google Headlines on:
3-D printing plastic objects and sensors
[google_news title=”” keyword=”3-D printing plastic objects and sensors” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
The Latest Bing News on:
Backscatter system
- Customs to double ‘sniffing’ strength against drug smugglingon April 26, 2024 at 5:30 pm
NILAI: The Customs Department will get another 20 sniffer dogs in June to combat the smuggling of illicit drugs, particularly via couriered parcels, says its deputy director-general (enforcement and ...
- What’s that?…A fuel cell that harvests energy from…dirt?on April 26, 2024 at 7:10 am
A soil microbial fuel cell where microbes in dirt could power applications which are literally “in the field”.
- CUSTOMS TO PURCHASE 20 SNIFFER DOGS COSTING RM1.9 MLNon April 26, 2024 at 1:01 am
NILAI, April 26 (Bernama) -- The Royal Malaysian Customs Department (JKDM) is in the process of purchasing 20 sniffer dogs and three backscatter scanning machines to ensure more effective efforts in ...
- Customs expanding K9 unit to curb drug smuggling via courieron April 25, 2024 at 11:00 pm
NILAI: Customs will get another 20 sniffer dogs in June to stem drug smuggling using courier services. Read full story ...
- Top-Rated Wifi Enabled Smart Thermostats for Your Home Comforton April 24, 2024 at 9:14 pm
With energy costs on the rise, buy the best smart thermostat for your needs to save money while keeping the temp just as you like it ...
- High-resolution lidar sees birth zone of cloud dropletson April 24, 2024 at 12:07 pm
Scientists demonstrated the first-ever remote observations of the fine-scale structure at the base of clouds. The results show that the air-cloud interface is a transition zone where aerosol particles ...
- Terry Anderson, US journalist held hostage nearly 7 years in Lebanon, dead at 76on April 21, 2024 at 8:05 pm
The ex-chief Middle East correspondent for The Associated Press, was longest held hostage of the scores of Westerners abducted in Lebanon.
- IAF’s Smart Fences Plan will greatly strengthen airfield securityon April 20, 2024 at 12:30 am
Time is also ripe to raise special airfield defence units and train them to secure vulnerable installations and maybe gradually replace Defence Security Corps at airbases ...
- Dragonfly rotorcraft given green light for mission to Titanon April 17, 2024 at 12:54 am
NASA has given the green light for the nuclear-powered Dragonfly rotorcraft to explore Saturn's largest moon, Titan. Approval for the 2028 interplanetary mission comes after years of delay due to ...
- Winchcombe meteorite went from ice to fire, smashed through solar systemon April 15, 2024 at 5:01 pm
They “woke to discover a pile of dark rocks had crash-landed on their driveway!” stated the Natural History Museum. Now, researchers have determined that the Winchcombe meteorite was affected by water ...
The Latest Google Headlines on:
Backscatter system
[google_news title=”” keyword=”backscatter system” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]