3D printing human tissue could help keep astronauts healthy all the way to Mars. An ESA project has produced its first bioprinted skin and bone samples.
These state-of-the-art samples were prepared by scientists from the University Hospital of Dresden Technical University (TUD), part of the project consortium together with OHB System AG as the prime contractor, and life sciences specialist Blue Horizon.
“Skin cells can be bioprinted using human blood plasma as a nutrient-rich ‘bio-ink’ – which would be easily accessible from the mission crewmembers,” comments Nieves Cubo from TUD.
“However, plasma has a highly fluid consistency, making it difficult to work with in altered gravitational conditions. We therefore developed a modified recipe by adding methylcellullose and alginate to increase the viscosity of the substrate. Astronauts could obtain these substances from plants and algae respectively, a feasible solution for a self-contained space expedition.
“Producing the bone sample involved printing human stem cells with a similar bio-ink composition, with the addition of a calcium phosphate bone cement as a structure-supporting material, which is subsequently absorbed during the growth phase.”
To prove that the bioprinting technique was transferable to space, printing of both the skin and bone samples took place upside down. With prolonged access to weightlessness impractical, the challenge of such ‘minus 1 G’ testing represented the next best option.
The samples represent the first steps in an ambitious end-to-end roadmap to make 3D bioprinting practical for space. The project is looking into the kind of onboard facilities that would be required, in terms of equipment, surgical rooms and sterile environments, as well as the ability to create more complex tissues for transplants – culminating ultimately in the printing of entire internal organs.
“A journey to Mars or other interplanetary destinations will involve several years in space,” comments Tommaso Ghidini, head of ESA’s Structures, Mechanisms and Materials Division, overseeing the project.
“The crew will run many risks, and returning home early will not be possible. Carrying enough medical supplies for all possible eventualities would be impossible in the limited space and mass of a spacecraft.
“Instead, a 3D bioprinting capability will let them respond to medical emergencies as they arise. In the case of burns, for instance, brand new skin could be bioprinted instead of being grafted from elsewhere on the astronaut’s body, doing secondary damage that may not heal easily in the orbital environment.
“Or in the case of bone fractures – rendered more likely by the weightlessness of space, coupled with the partial 0.38 Earth gravity of Mars – replacement bone could be inserted into injured areas. In all cases the bioprinted material would originate with the astronaut themselves, so there would be no issue with transplant rejection.”
With 3D bioprinting progressing steadily on Earth, this project is the first to adopt it off the planet, explains Tommaso: “It’s a typical pattern we see when promising terrestrial technologies are first harnessed for space, ranging from cameras to microprocessors. More needs to be done with less, to make things work in the challenging space environment, so various elements of the technology get optimised and miniaturised.
“Similarly, we hope that the work we do with 3D bioprinting will help accelerate its progress on Earth as well, hastening its widespread availability, bringing it to people even sooner.”
Learn and see more: Upside down 3D-printed skin and bone for humans to Mars
The Latest on: 3D-printing skin and bone
[google_news title=”” keyword=”3D-printing skin and bone” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D-printing skin and bone
- Meet Shanidar Z, a Neanderthal Woman Who Walked the Earth 75,000 Years Agoon May 6, 2024 at 10:54 am
After carefully piecing her skull back together, archaeologists and paleoartists have created a lifelike 3D reconstruction of the woman's face ...
- Skin Care Newson May 3, 2024 at 5:01 pm
3D-Printed Skin Closes Wounds and Contains Hair Follicle Precursors Mar. 4, 2024 — Fat tissue holds the key to 3D printing layered living skin and potentially hair follicles, according to ...
- Design of the Week: Neanderthal Womanon May 3, 2024 at 2:40 pm
Kerry Stevenson, aka "General Fabb" has written over 8,000 stories on 3D printing at Fabbaloo since he launched the venture in 2007, with an intention to promote and grow the incredible technology of ...
- Neanderthal woman's face brought to life in stunning reconstructionon May 2, 2024 at 11:51 am
With her long, brown hair and determined gaze, the new facial reconstruction lets us peek into the world of an archaic human who lived tens of thousands of years ago.
- 3D PRINTINGon April 9, 2024 at 3:50 pm
3D printing on human skin may soon become a reality Scientists have developed a "revolutionary" new 3D printing technique which could be used to print electronics directly on human skin.
- 3D-bioprinted blood vessel to reveal microgravity effect on astronautson April 5, 2024 at 7:45 am
experts from Europe came together to discuss the benefits of applying 3D bioprinting and regenerative medicine to space. A year later, the ESA project produced its first bioprinted skin and bone ...
- 3D printing may be saving lives by making bones, pills and soon, organson March 28, 2024 at 5:00 pm
The technique of 3D printing is spreading rapidly in the field of medicine. Many hearing aids and dental crowns are now 3D-printed, as are disposable surgical instruments and even prosthetic limbs.
- 3d Printer hackson March 3, 2024 at 4:00 pm
[Slant 3D] knows a lot about optimizing 3D prints ... a texture such as a geometric pattern or by applying a fuzzy skin modifier. Printing a texture onto the exterior is great, but the outcome ...
- 26 Million New Cases, Three Dimensions, And One New Technology: How Bioprinting Can Improve Cancer Treatmentson July 11, 2023 at 3:30 pm
Opinions expressed by Forbes Contributors are their own. I cover areas for change, education, and investment in women’s health. 3D printing is the process through which a 3D physical object ...
- This 3D printed ‘bone brick’ could transform how we treat bomb injuries – inside storyon August 2, 2020 at 10:51 pm
This involves fabricating bone, nerve, cartilage and skin through the use of 3D printing. 3D printing technology can now reproduce biocompatible and biodegradable materials that can be used in the ...
via Bing News