First of its kind robot is inspired by nature, capable of multiple jumps
Engineers at Harvard University and the University of California, San Diego, have created the first robot with a 3D-printed body that transitions from a rigid core to a soft exterior. The robot is capable of more than 30 untethered jumps and is powered by a mix of butane and oxygen. Researchers describe the robot’s design, manufacturing and testing in the July 10 issue of Science magazine.
“We believe that bringing together soft and rigid materials will help create a new generation of fast, agile robots that are more robust and adaptable than their predecessors and can safely work side by side with humans,” said Michael Tolley, an assistant professor of mechanical engineering at UC San Diego, and one of the paper’s co-lead authors with Nicholas Bartlett, a Ph.D. student in the Microrobotics Laboratory at Harvard, where the bulk of the work took place. Bartlett and Tolley designed, manufactured and tested the robot.
The idea of blending soft and hard materials into the robot’s body came from nature, Tolley said. For example, certain species of mussels have a foot that starts out soft and then becomes rigid at the point where it makes contact with rocks. “In nature, complexity has a very low cost,” Tolley said. “Using new manufacturing techniques like 3D printing, we’re trying to translate this to robotics.”
Soft robots tend to be slow, especially when accomplishing tasks without being tethered to power sources and other electronics, said Tolley, who recently co-authored a research review on soft robotics for Nature (Rus, Tolley, v. 521, pp. 467-475). Researchers hope that their work will allow rigid components to be better integrated within soft robots, which will then move faster without compromising the safety of the humans who would work with them.
In the case of the robot described in Science, rigid layers make for a better interface with the device’s electronic brains and power sources. The soft layers make it less vulnerable to damage when it lands after jumping.
The robot is made of two nestled hemispheres. The top hemisphere is like a half shell, 3D-printed in once piece, with nine different layers of stiffness, creating a structure that goes from rubber-like flexibility on the exterior to full rigidity near to core. Researchers tried several versions of the design and concluded that a fully rigid top would make for higher jumps. But a more flexible top was more likely to survive impacts on landing, allowing the robot to be reused. They decided to go with the more flexible design.
A challenging part of the process was designing around off-the-shelf materials available to 3D-print the robot, Tolley said. Specs provided by the manufacturers were not detailed enough, so he and his coauthors printed samples to test every single material they used. The data they collected allowed them to calculate the precise stiffness of the nine different layers in their robot’s top half. They used this information to simulate the performance of the robot and speed up the design process.
The bottom half of the robot is flexible and includes a small chamber where oxygen and butane are injected before it jumps. After the gases are ignited, this half behaves very much like a basketball that gets inflated almost instantaneously, propelling the robot into a jump. When the chemical charge is exhausted, the bottom hemisphere goes back to its original shape.
The two hemispheres surround a rigid core module that houses a custom circuit board, high-voltage power source, battery, miniature air compressor, butane fuel cell and other components. In a series of tests, the robot jumped two and a half feet (0.75 m) in height and half a foot (0.15m) laterally. In experiments, the robot jumped more than 100 times and survived an additional 35 falls from a height of almost four feet.
Read more: 3D-printed Robot is Hard at Heart, Soft on Outside
The Latest on: Biologically inspired robotics
[google_news title=”” keyword=”Biologically inspired robotics” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: Biologically inspired robotics
- Swarm of tiny snail robots stick together to form new structureson May 8, 2024 at 6:15 am
Researchers have built a swarm of miniature, snail-inspired robots, minus all the mucus. Instead, a retractable suction cup works in tandem with the remote-controlled machine’s tank-like treads to ...
- There's a Surprising Reason Why Robots Can't Outrun The Fastest Animalson May 5, 2024 at 2:00 pm
We've made some significant steps forward in robotics and AI in recent years, but haven't yet built robots that can outpace the best that nature has to offer – and new research explores the key ...
- Scientists unveil giant robot bees that can fly and SWARM in groups autonomouslyon May 2, 2024 at 7:14 am
SCIENTISTS are creating a buzz after unveiling a giant robotic bee that can fly in a swarm. The so-called BionicBee measures 22cm long and weighs less than a typical slice of bread. And it can ...
- Meet the plant-inspired robots we may use to colonize Marson May 1, 2024 at 5:00 pm
If you buy through a BGR link, we may earn an affiliate commission, helping support our expert product labs. In the early 2010s, when Zoobotics — robots inspired by the animal world — started ...
- Octopus inspires new suction mechanism for robotson May 1, 2024 at 7:44 am
A new robotic suction cup which can grasp rough, curved and heavy stone, has been developed by scientists at the University of Bristol. The team, based at Bristol Robotics Laboratory, studied the ...
- Robot Masters Terrain with Animal-Like Gait Transitionson April 30, 2024 at 1:43 pm
Researchers leveraged deep reinforcement learning (DRL) to enable a robot to adaptively switch gaits, mimicking animal movements like trotting and pronking, to traverse complex terrains effectively.
- Robots can't outrun animals. A new study explores whyon April 30, 2024 at 4:25 am
The question may be the 21st century's version of the fable of the tortoise and the hare: Who would win in a foot race between a robot and an animal?
- Robots cannot outrun animals, but they're evolving fasteron April 26, 2024 at 7:59 pm
Despite these efforts, today's robots still cannot match the natural abilities of many animals in terms of endurance ...
- Why can't robots outrun animals?on April 25, 2024 at 5:00 pm
Previously, it was commonly accepted that animals' outperformance of robots must be due to the superiority of biological components. "The way things turned out is that, with only minor exceptions ...
- Why animals run faster than their robot doppelgängers… for nowon April 24, 2024 at 11:00 am
Credit: Animal Inspired Movement and Robotics Lab, CU Boulder “The way things turned out is that, with only minor exceptions, the engineering subsystems outperform the biological equivalents ...
via Bing News