Researchers at Nanyang Technological University, Singapore (NTU Singapore) have 3D printed a ready-to-fly drone with embedded electronics using aerospace-grade material.
The electronics were incorporated in the drone during the 3D printing process which employs Stratasys ULTEMTM 9085 – a high strength, lightweight FDM material certified for use in commercial aircrafts.
The drone is jointly developed by NTU’s Singapore Centre for 3D Printing (SC3DP) and Stratasys Asia Pacific, a subsidiary of Stratasys Ltd. (NASDAQ: SSYS), a 3D printing and additive manufacturing solutions company.
How the Flight-Ready Drone was Built
The drone – a quadcopter with four rotors – was designed, 3D printed and flown by Mr Phillip Keane, an NTU PhD candidate from the School of Mechanical and Aerospace Engineering who researches at the university’s Singapore Centre for 3D Printing (SC3DP).
In 3D printing, objects are created digitally layer by layer until completion. However, embedding electronics can be a challenge, as most will not survive the high temperatures of the 3D printing process.
Commercial grade electronics were therefore modified and placed within the drone at the various stages of the printing process. They survived the high temperature printing which reached over 160 degrees Celsius, compared to the usual 80 to 100 degrees. Only the motors and the propellers were mounted after the entire chassis was completed.
Mr Keane said: “One of the toughest challenges was to find electronic components that could theoretically survive the high temperature printing process – we had to add some heat-proofing modifications to the components to ensure they could last. This involved adding new components to the printed circuit boards and also designing custom housings.”
The drone was completed in under 14 hours. During the printing, there were just three pauses for the electronics to be placed within the chassis.
“The housings which were pre-printed in ULTEM 9085 also provide a flat surface for the 3D printer to continue printing over them. I also had to deal with tight time constraints as some of the components could not survive in the heat for more than 20 minutes.”
In addition to being extremely rugged, the drone is capable of supporting over 60kg of weight suspended from its structure. Moving forward, Mr Keane said he is working on the next version of the drone which will feature better durability, lighter weight and improved flight dynamics.
Professor Chua Chee Kai, Executive Director of NTU’s SC3DP said that this is a successful example of disruptive innovation that can be achieved when researchers from academia work with industry partners.
“At NTU, we have world leading researchers with vast knowledge of materials and 3D printing processes who have invented innovative techniques to overcome the limitations of existing technologies,” explained Prof Chua, the world’s most cited scientist in the field of 3D printing according to the Web of Science, a research database maintained by Thomson Reuters.
“Together with Stratasys’ engineers and their intimate knowledge of 3D printing, we were able to push the limits of today’s technology and print a drone that is incredibly durable and can withstand high heat.”
“This project exemplifies the power of Stratasys’ flagship Fused Deposition Modeling (FDM) 3D printing technology and perfectly demonstrates the strength of the ULTEM resin,” commented Fred Fischer, Director – Applications and Products, Stratasys Asia Pacific. “We look forward to researching, developing and unveiling more possibilities with 3D printing and materials as we work with industry partners and academia.”
ULTEM 9085 is a production-grade thermoplastic that can be 3D printed and is prized for a high strength-to-weight ratio and FST (flame, smoke and toxicity) rating, making it ideal for the commercial transportation industry, especially aerospace.
Professor Louis Phee, Chair, School of Mechanical and Aerospace Engineering at NTU, said that unmanned aerial vehicles (UAV) are a major research thrust at the school. “Being the first university in Singapore to offer an Aerospace Engineering degree programme, we have been successful in attracting the brightest students to work with our professors to push the frontiers of drone technologies to cater to Singapore’s unique needs and requirements. In the near future, I expect to see more exciting new drone technologies from NTU that will be translated into real applications.”
Learn more: NTU and Stratasys 3D Print Operational Drone with Embedded Electronics using Aerospace-grade Material
The Latest on: 3D printed drone
[google_news title=”” keyword=”3D printed drone” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
via Google News
The Latest on: 3D printed drone
- Connecting Roads and Data: 10 Trends Reshaping Transportation Technologyon May 1, 2024 at 8:55 am
Driven by the need for efficiency, sustainability, and safety. The convergence of roads and data is revolutionizing how we move people and goods from one place to another. From autonomous vehicles to ...
- Airframe Designs helps streamline data for customerson May 1, 2024 at 7:45 am
Aerospace specialist Airframe Designs is leading the industry by investing in a state-of-the-art data planning system to become even more streamlined on behalf of its customers.
- From TikTok to DJI: Could U.S. Scrutiny Extend to Chinese 3D Printer Manufacturerson April 30, 2024 at 9:12 am
I’m reading reports about the US banning certain Chinese companies, and thought about the implications for 3D printing.
- This Tech Will Change Your Practice Sooner Than You Thinkon April 30, 2024 at 1:53 am
These five advanced technologies are already a reality for many doctors and could hit your office in the next few years.
- 3D Printing A House: How Tech Changed The Way We Build Thingson April 29, 2024 at 6:00 am
The University of Maine has recently unveiled the Factory of the Future 1.0 (FoF 1.0), which is the world's largest polymer 3D printer, according to a report by Engadget. This printer is capable of pr ...
- Mikhail Sergachev's returnon April 28, 2024 at 4:54 pm
Yahoo Sports' Charles McDonald breaks down the Patriots' 2024 draft. A 2008 Alfa Romeo Spider 2.2 JTS in an English wrecking yard. If nothing else, the Bills have a player who can recognize a good ...
- The world’s largest 3D printer is at a university in Maine. It just unveiled an even bigger oneon April 24, 2024 at 2:45 pm
The university that boasts the world’s largest 3D printer developed one even bigger. And it’s poised to help tackle one of America’s biggest problems of all.
- Angel Aerial Systems Reveals Trio™ Drone at XPONENTIAL 2024on April 23, 2024 at 4:42 pm
Angel Aerial Systems, a start-up company based in Cincinnati Ohio, launched their first product, the Trio™ drone at XPONENTIAL 2024. A crowd gathered around the Angel Aerial booth to witness the ...
- Top 5 Videos: Workspace Preparation for Resin 3D Printingon April 20, 2024 at 3:01 pm
Discover 3D printing highlights - Resin 3d printing tips, Musk talks 3D printed starships, 3D printed parts for RC cars, and more!
via Bing News