From aerospace and defense to digital dentistry and medical devices, 3-D printed parts are used in a variety of industries. Currently, 3-D printed parts are very fragile and traditionally used in the prototyping phase of materials or as a toy for display. A doctoral student in the Department of Materials Science and Engineering at Texas A&M University has pioneered a countermeasure to transform the landscape of 3-D printing today.
Brandon Sweeney and his advisor Dr. Micah Green, associate professor in the Department of Chemical Engineering, discovered a way to make 3-D printed parts stronger and immediately useful in real-world applications. Sweeney and Green applied the traditional welding concepts to bond the submillimeter layers in a 3-D printed part together, while in a microwave.
Sweeney began working with 3-D printed materials while employed at the Army Research Laboratory at the Aberdeen Proving Grounds in Maryland.
“I was able to see the amazing potential of the technology, such as the way it sped up our manufacturing times and enabled our CAD designs to come to life in a matter of hours,” Sweeney said. “Unfortunately, we always knew those parts were not really strong enough to survive in a real-world application.”
3-D printed objects are comprised of many thin layers of materials, plastics in this case, deposited on top of each other to form a desired shape. These layers are prone to fracturing, causing issues with the durability and reliability of the part when used in a real-world application, for example a custom printed medical device.
“I knew that nearly the entire industry was facing this problem,” Sweeney said. “Currently, prototype parts can be 3-D printed to see if something will fit in a certain design, but they cannot actually be used for a purpose beyond that.”
When Sweeney started his doctorate, he was working with Green in the Department of Chemical Engineering at Texas Tech University. Green had been collaborating with Dr. Mohammad Saed, assistant professor in the electrical and computer engineering department at Texas Tech, on a project to detect carbon nanotubes using microwaves. The trio crafted an idea to use carbon nanotubes in 3-D printed parts, coupled with microwave energy to weld the layers of parts together.
“The basic idea is that a 3-D part cannot simply be stuck into an oven to weld it together because it is plastic and will melt,” Sweeney said. “We realized that we needed to borrow from the concepts that are traditionally used for welding parts together where you’d use a point source of heat, like a torch or a TIG welder to join the interface of the parts together. You’re not melting the entire part, just putting the heat where you need it.”
Since the layers making up the 3-D printed parts are so tiny, special materials are utilized to control where the heat hits and bonds the layers together.
“What we do is take 3-D printer filament and put a thin layer of our material, a carbon nanotube composite, on the outside,” Sweeney said. “When you print the parts out, that thin layer gets embedded at the interfaces of all the plastic strands. Then we stick it in a microwave, we use a bit more of a sophisticated microwave oven in this research, and monitor the temperature with an infrared camera.”
The technology is patent-pending and licensed with a local company, Essentium Materials. The materials are produced in-house, where they also design the printer technology to incorporate the electromagnetic welding process into the 3-D printer itself. While the part is being printed, they are welding it at the same time. They are currently in beta mode, but this has the potential to be on every industrial and consumer 3-D printer where strong parts are needed.
“If you’re an engineer and if you actually care about the mechanical properties of what you’re making, then this ideally would be on every printer in that category,” Sweeney said.
Learn more: Strengthening 3-D printed parts for real-world use
The Latest on: 3-D printed parts
[google_news title=”” keyword=”3-D printed parts” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]- Combatting Homelessness and Climate Change Through 3D-Printed Homeson May 1, 2024 at 11:29 am
The building and construction sector is the biggest culprit in the climate crisis. The construction industry uses over 3 billion tons of raw materials, ...
- Hudson preschoolers become community helpers with 3D printing lessonson May 1, 2024 at 9:00 am
A Hudson pre-K class gets early exposure to 3D printing technology and comes up with creative ideas to use the items they create to help their community.
- Middle East crisis: Jordan says some Israeli settlers attacked aid convoys on way to Gaza – as it happenedon May 1, 2024 at 7:16 am
Two convoys on the way to Gaza attacked by some Israeli settlers, reports Jordan’s state news agency ...
- Tech grant makes 3D printing more accessible and ecologicalon May 1, 2024 at 6:25 am
What could be more fun and engaging than learning some of the principles of the scientific method and physics by making and launching your own rocket?
- Industry Voices: Is Micro-3D Printing the Future for Tiny Parts?on April 29, 2024 at 2:25 pm
Additive manufacturing is becoming an efficient and cost-effective alternative to traditional micro-manufacturing methods such as molding.
- Rice University Students Develop Affordable Metal 3D Printer Prototype Using Cold-Spray Technologyon April 25, 2024 at 9:47 am
Students at Rice University have developed an incredibly inexpensive metal 3D printer prototype. Researchers at Virginia Tech have taken on a big challenge: making wind turbines sustainable.
- MUSE Nuclear Fusion Stellerator Made with Off the Shelf Parts and 3D Printed Shellon April 22, 2024 at 2:16 am
“MUSE is largely constructed with commercially available parts,” said Michael ... on magnetisation magnitude, 3∘ tolerance on magnetization orientation and 1 mm tolerance in physical dimensions. Multi ...
- A 3D Printer Used By Microsoft, Ford, and NASA Is Now Commercially Available — Here's What It Can Doon April 17, 2024 at 7:45 am
A 3D printer already in use at Microsoft, Ford, and NASA is now commercially available — and it runs on some 3D printed parts itself. Formlabs, a 3D printing company with a unicorn valuation of $2 ...
- The redesigned 3D printer from Formlabs gets us one step closer to the Enterprise Replicatoron April 17, 2024 at 6:23 am
The Form 4 is modular, more precise, and five times faster than the previous generation. The Form 4 3D printer is modular, more precise, and five times faster than the previous generation.
- Formlabs Launches Form 4, The Fastest, Most Reliable 3D Printer for Prototyping Through Productionon April 17, 2024 at 6:01 am
Formlabs, the leader in 3D printing, today unveiled the fastest, most reliable 3D printer for professionals with the launch of Fo ...
via Google News and Bing News