Who knew? Harvesting electricity from wood soaking in water

In nature when wood dries out from being soaked, it gives off an electrical charge. Researchers at KTH in Sweden showed that if the wood's composition is nanoengineered the right way, the phenomenon can be turned into a power source. CREDIT David Callahan/KTH Royal Institute of Technology

In nature when wood dries out from being soaked, it gives off an electrical charge. Researchers at KTH in Sweden showed that if the wood’s composition is nanoengineered the right way, the phenomenon can be turned into a power source.

CREDIT: David Callahan/KTH Royal Institute of Technology

Who knew? Harvesting electricity from wood soaking in water

Water and wood may one day be all that’s needed to provide electrical power for a household. At a time when energy is a critical issue for many millions of people worldwide, scientists in Sweden have managed to generate electricity with the help of these two renewable resources.

The method reported in the scientific journal Advanced Functional Materials by researchers at KTH Royal Institute of Technology focuses on what naturally happens after wood is placed in water, and the water evaporates. Transpiration, a process in which water moves through a plant, is constantly occurring in nature. And it produces small amounts of electricity, known as bioelectricity.

Yuanyuan Li, assistant professor at the Division of Biocomposites at KTH, says that with some nanoengineering of wood—and pH tuning—small but promising amounts of electricity can now be harvested.

“At the moment we can run small devices such as an LED lamp or a calculator,” Li says. “If we wanted to power a laptop, we would need about one square meter of wood about one centimeter thick, and about 2 liters of water.”

“For a normal household we’d need far more material and water than that, so more research is needed.”

By altering the nanoscale composition of wood, the researchers improved its properties in terms of surface area, porosity (or density), surface charge, how readily water can pass through the material and the water solution itself—all of which are factors that influence electricity generation in wood.

“We compared the porous structure in regular wood with the material we improved with regard to surface, porosity, surface charge and water transportation. Our measurements showed electricity generation that’s 10 times higher than with natural wood,” Li says.

She says that further tuning the pH difference between wood and water, due to an ion concentration gradient, achieves a potential of up to 1 volt and a remarkable power output of 1.35 microwatts per square centimeter.

Li says that to date, the wood manages to deliver high voltage for about 2-3 hours, before it begins to wane. So far the wood has managed 10 cycles with water, without a decline in the material’s performance, she says.

“The great advantage of this technology is that the wood can readily be used for other purposes once it’s depleted as an energy source, such as transparent paper, wood-based foam and different biocomposites.”

See Also

 

Original Article: Researchers harvest electricity from wood soaking in water

More from: KTH The Royal Institute of Technology 

 

 

The Latest Updates from Bing News

Go deeper with Bing News on:
Electricity from wood and water
Go deeper with Bing News on:
Harvesting energy
What's Your Reaction?
Don't Like it!
0
I Like it!
0
Scroll To Top