In the EU-funded project SelSus, Fraunhofer scientists are collaborating in a consortium with partners from research and industry to develop maintenance technology capable of forecasting machine downtimes in production before they occur. This allows plant managers to rectify faults before the machine breaks down. The system even corrects some defects automatically.
Unforeseen machine failures during ongoing production — plant managers dread them, technicians detest them and managers just sigh and factor them in. Such incidents prompt frantic repairs, drive up costs, adversely affect delivery reliability and ultimately weaken companies’ competitiveness. Yet often the problem is only a small defect or normal wear and tear. However, if left undetected, these can lead to major disruptions and production downtimes.
What would be helpful is a diagnostic procedure capable of monitoring the status of all components in the production line, identifying problems and weak points and informing the responsible employee in a timely manner. Based on what’s known as a decision-support system, maintenance personnel can then reach a decision and take targeted action to repair the defect. Ideally without having to interrupt production.
Precisely this is one of the underlying ideas, albeit not the only one, behind the ambitious SelSus project within which the Fraunhofer Institute for Manufacturing Engineering and Automation IPA is currently researching. “The aim is not just to monitor the status of the machines and components. Using intelligent software and sensor networks, the plan is to detect potential weak points or signs of wear and tear early enough for the system to be able to predict potential malfunctions,” explains Martin Kasperczyk from Fraunhofer IPA. The developed diagnostic models also directly provide suggestions or recommendations on how to rectify the problem. Project partner Electrolux in Pordenone, Italy, uses such a decision-support system. The system is capable of predicting with a certain probability potential failures on a press for washing machine facings and of diagnosing actually occurring malfunctions. The data needed to monitor the machine status is partially provided by sensors. They measure values such as energy consumption, temperature, oil pressure, particles in the oil or vibrations. Fraunhofer IPA and the participating consortium have also proved that the technology functions reliably in practice.
The system repairs itself
The system is even capable of sending control impulses to individual machines. A welding control on which a sensor has failed, for instance, can continue to work almost seamlessly in a secure mode, without any serious disruptions. The capability for self-repair and sustaining production has also given the project its name. The full project title of SelSus is “Health Monitoring and Life-Long Capability Management for Self-Sustaining Manufacturing Systems.”
However, first a number of technological hurdles had to be overcome. Martin Kasperczyk says: “One of the biggest challenges was analyzing the flood of data. After all, we’re talking here about predicting malfunctions or breakdowns of machines with a high degree of reliability. You don’t get there just by programming a couple of algorithms.”
Bayesian networks and sensor data
The experts are putting their faith in Bayesian networks. A Bayesian network is a mathematical model that can be used to compute the probabilities of a certain event or state occurring. The model represents a set of variables and their conditional dependencies. With the help of the data collected by the sensors, the software for example computes the probabilities of a specific high-stress cable breaking in the near future and, where applicable, signals that it should be replaced.
But the SelSus software relies not only on sensors. It also takes the technical characteristics of the machine and its performance parameters into account. This data has to be captured during installation and configuration of the system. Moreover, an extensive test run tells the system how the machine and its components behave in continuous operation and under load. Only then is it ready for use. The software also registers new data, for instance as a result of machine upgrades or deterioration in performance due to wear, enabling the system to learn.
The complexity of the SelSus concept is also evident from the fact that the software even interacts with operators by analyzing the causes of potential or existing malfunctions and proposing an appropriate course of action.
A system with self-healing capabilities from Coventry
Project partner The Manufacturing Technology Centre from Coventry, UK, has created a system with self-healing capabilities. In an engine production plant, a dispenser is attached to a robotic arm by means of vacuum. If the dispenser encounters resistance, rather than snapping off, it reacts flexibly. It loses the grip produced under vacuum and drops a few centimeters until it is stopped by springs. The springs then draw the dispenser back to its original position. Subsequent calibration ensures the tool is in the correct position — and after the brief interruption, the work process continues.
Learn more:Â Machinery that repairs itself
The Latest on:Â Self-sustaining manufacturing systems
[google_news title=”” keyword=”self-sustaining manufacturing systems” num_posts=”10″ blurb_length=”0″ show_thumb=”left”]
- Scientists urge action over life-threatening pollution from solar power waste in Africaon April 19, 2024 at 12:42 am
Researchers from The University of Manchester investigating waste management practices for off-grid solar technologies in Malawi have discovered life-threatening quantities of lead pollution from ...
- Researchers quantify the ideal in situ construction method for lunar habitatson April 18, 2024 at 12:28 pm
As the lunar exploration mission evolves from exploration to construction and utilization, in situ lunar construction becomes an imperative requirement. The key is regolith solidification and ...
- RoboSapiens: AI is making industrial robots more ‘free thinking’on April 18, 2024 at 11:00 am
The demand for RoboSapiens -- robots that can intelligently adapt to their environment and unforeseen circumstances -- is surging.
- Stellantis Charges Up With $100M Solar Investment in Argentina: Reporton April 18, 2024 at 4:56 am
Stellantis reportedly plans to acquire 49.5% of 360 Energy Solar for $100 million in Argentina to increase renewable energy at its plants, including powering them with 360's solar power plant.
- Sustainable Infrastructure Systems creates fiber-reinforced post-consumer plastic structural panelson April 17, 2024 at 11:14 am
SIS offers a scalable building solution, already established in a pedestrian bridge application, to tackle unprocessed soft plastics waste.
- Unleashing the Potential of Emerging Technologies in Manufacturing and Automotive Industrieson April 16, 2024 at 6:28 am
The manufacturing and automotive industries are undergoing a profound transformation, driven by the rapid adoption of cutting-edge technologies such as 5G, Internet of Things (IoT), Artificial ...
- Expanding Pipeline System Faces Critical Safety Concernson April 15, 2024 at 8:15 am
CJ: It seems that there is much public concern which is voiced into protest to pipelines developments in recent years, and some of the major pipeline infrastructure needed has been stopped because of ...
- Do we want Australia's economy to become more self-sufficient?on April 13, 2024 at 9:51 pm
Prime Minister Anthony Albanese says we must think differently about the role of government, when strategic competition has become a fact of life. But what role should government play in our future ...
- Tech war: China pushes forward self-reliance campaign amid unrelenting US sanctionson April 13, 2024 at 7:00 pm
In Beijing's Tongming Lake IT City, a group of prominent Chinese firms are leading efforts to become self-sufficient in core technology Some foreign tech businesses operating in China are already ...
- How Aluminium Castings, Backed by Innovative and Precision-Based Manufacturing, Can Drive Localisation for the Energy Sector in Indiaon April 4, 2024 at 1:01 am
Aluminium is crucial to India’s energy sector, which accounts for around 44% of the demand for the wonder metal.
via Google News and Bing News