via Phys.org
Engineers at the University of Maryland (UMD) have created a new shape-changing or “morphing” 3D printing nozzle that was featured as a Frontispiece in the January 5th issue of the journal Advanced Materials Technologies.
The team’s morphing nozzle offers researchers new means for 3D printing “fiber-filled composites”– materials made up of short fibers that boost special properties over traditional 3D-printed parts, such as enhancing part strength or electrical conductivity. The challenge is that these properties are based on the directions or “orientations” of the short fibers, which has been difficult to control during the 3D printing process, until now.
“When 3D printing with the morphing nozzle, the power lies on their side actuators, which can be inflated like a balloon to change the shape of the nozzle, and in turn, the orientations of the fibers,” said Ryan Sochol, an assistant professor in mechanical engineering and director of the Bioinspired Advanced Manufacturing (BAM) Laboratory at UMD’s A. James Clark School of Engineering.
To demonstrate their new approach, the researchers set their sights on emerging “4D printing” applications. “4D printing refers to the relatively new concept of 3D printing objects that can reshape or transform depending on their environment,” said UMD mechanical engineering professor David Bigio, a co-author of the study. “In our work, we looked at how printed parts swelled when submerged in water, and specifically, if we could alter that swelling behavior using our morphing nozzle.”
Recent advances in 4D printing rely on materials capable of both “anisotropic” expansion, swelling more in one direction than another, as well as “isotropic” expansion, swelling identically in all directions. Unfortunately, switching between these conditions has typically required researchers to print with multiple, different materials.
“What was exciting was discovering that we could cause a single printed material to transition between anisotropic and isotropic swelling just by changing the nozzle’s shape during the 3D printing process,” said Connor Armstrong, lead author of the study. Armstrong developed the approach as part of his MS thesis research at UMD.
“Importantly, the nozzle’s ability to morph and to even up the score in terms of swelling properties is not limited to 4D printing,” said study co-author and recently graduated mechanical engineering undergraduate student, Noah Todd. “Our approach could be applied for 3D printing many other composite materials to customize their elastic, thermal, magnetic or electrical properties for example.”
Interestingly, to build the morphing nozzle itself, the team actually turned to a different 3D printing technology called “PolyJet Printing”. This multi-material inkjet-based approach offered by UMD’s Terrapin Works 3D Printing Hub allowed the researchers to 3D print their nozzle with flexible materials for the inflatable side actuators and the shape-changing central channel, but then rigid materials for the outer casing and the access ports.
“The use of multi-material PolyJet 3D printing enabled us to design the nozzle with an operating power range or set of pressure magnitudes that can be reproduced in essentially any research laboratory,” said study co-author and mechanical engineering PhD candidate Abdullah Alsharhan.
In one application of this new approach, the team is exploring the use of their strategy to realize biomedical applications in which bulk printed objects could reshape in the presence of particular stimuli from the body. The team is also in discussions with several DoD laboratories to use the morphing nozzle to support the production of weapons for defense and other military systems.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Fiber-filled composites
- Paralympic Wheelchair Racing Demands Performance Gloves — 3D Printing Delivers
CRP USA utilized selective laser sintering and Windform XT 2.0 composite material in the manufacturing process. The carbon fiber–filled composite employs a polyamide matrix. Leveraging thermoplastics ...
- Wheelchair racing glove demands met by CRP USA composites
Suppliers of thermoplastics and carbon fiber chime in regarding PEEK vs. PEKK, and now PAEK, as well as in-situ consolidation — the supply chain for thermoplastic tape composites continues to evolve.
- Horses, guns and swords: How cumbersome equipment gets to the Olympics
For every athlete, the road to the Olympics is filled with twists, turns and obstacles. But those journeys can be even more complicated for their equipment. While Olympic organizers provide the ...
- The Best In-Wall & In-Ceiling Speakers 2024
This is complemented by the mineral-filled polymer cone and strong composite driver baskets ... Key specs: DuPont Kevlar fiber cone drivers, titanium silk dome tweeters, waterproof, in-wall/in-ceiling ...
- ALIGN® with a New Vertical
Gentek,® a leading manufacturer of exterior building products, has added a new product to its revolutionary composite cladding portfolio with the launch of ALIGN® 12" Board & Batten. Board & Batten is ...
Go deeper with Google Headlines on:
Fiber-filled composites
[google_news title=”” keyword=”fiber-filled composites” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
4D printing
- The 3 Best 4D Printing Stocks to Buy Now
It might seem like there’s a typo in the title, but 4D printing stocks are a real industry emerging right now. But what is 4D printing, other than just 3D printing in an extra dimension? Well, in this ...
- Additive Manufacturing and Material Market is Expected to Generate US$ 183 Billion by 2032: Future Market Insights, Inc.
In 2022, the global additive manufacturing and material market was estimated to be worth $26.8 billion. Demand for additive manufacturing and materials is predicted to grow at a CAGR of 21.2% over the ...
- Diamond dust for MRI, 4D printing creates advanced devices
New and exciting technologies feature in this episode of the Physics World Weekly podcast. Our first guest is the neuroscientist and physicist Jelena Lazovic Zinnanti, who recalls how she discovered ...
- 4D Printing Market Prospects Future Growth and Opportunities by 2032
Request To Download Sample of This Strategic Report @ 4D printing continues to emerge as an advance in 3D printing technology. 4D printing allows components to become a different form when exposed to ...
- Global 4D Printing Market is Expected to Grow at a CAGR of 17.4% over the Forecast Period (2024 – 2034): A Report by TNR, The Niche Research
Technological Advancements in Material Science and Additive Manufacturing is the Key Growth Driver Fostering the 4D Printing MarketWilmington, Delaware, July 11, 2024 (GLOBE NEWSWIRE) -- 4D printing ...
Go deeper with Google Headlines on:
4D printing
[google_news title=”” keyword=”4D printing” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]