An aerosol jet printer puts down layers of carbon-based electronic inks to create transistors that can be fully recycled using only water, rather than requiring harsh, toxic chemicals.
Credit – Jason Arthurs Photography
First-of-its-kind demonstration suggests a more environmentally friendly future for the electronics industry is possible
Engineers at Duke University have produced the world’s first fully recyclable printed electronics that replace the use of chemicals with water in the fabrication process. By bypassing the need for hazardous chemicals, the demonstration points down a path industry could follow to reduce its environmental footprint and human health risks.
The research appeared online Feb. 28 in the journal Nano Letters.
One of the dominant challenges facing any electronics manufacturer is successfully securing several layers of components on top of each other, which is crucial to making complex devices. Getting these layers to stick together can be a frustrating process, particularly for printed electronics.
“Putting layers on top of each other is not as easy as putting them down on their own — but that’s what you have to do if you want to build electronic devices with printing.”
“If you’re making a peanut butter and jelly sandwich, one layer on either slice of bread is easy,” explained Aaron Franklin, the Addy Professor of Electrical and Computer Engineering at Duke, who led the study. “But if you put the jelly down first and then try to spread peanut butter on top of it, forget it, the jelly won’t stay put and will intermix with the peanut butter. Putting layers on top of each other is not as easy as putting them down on their own — but that’s what you have to do if you want to build electronic devices with printing.”
In previous work, Franklin and his group demonstrated the first fully recyclable printed electronics. The devices used three carbon-based inks: semiconducting carbon nanotubes, conductive graphene and insulating nanocellulose. In trying to adapt the original process to only use water, the carbon nanotubes presented the largest challenge.
To make a water-based ink in which the carbon nanotubes don’t clump together and spread evenly on a surface, a surfactant similar to detergent is added. The resulting ink, however, does not create a layer of carbon nanotubes dense enough for a high current of electrons to travel across.
“You want the carbon nanotubes to look like al dente spaghetti strewn down on a flat surface,” said Franklin. “But with a water-based ink, they look more like they’ve been taken one-by-one and tossed on a wall to check for doneness. If we were using chemicals, we could just print multiple passes again and again until there were enough nanotubes. But water doesn’t work that way. We could do it 100 times and there’d still be the same density as the first time.”
This is because the surfactant used to keep the carbon nanotubes from clumping also prevents additional layers from adhering to the first. In a traditional manufacturing process, these surfactants would be removed using either very high temperatures, which takes a lot of energy, or harsh chemicals, which can pose human and environmental health risks. Franklin and his group wanted to avoid both.
In the paper, Franklin and his group develop a cyclical process in which the device is rinsed with water, dried in relatively low heat and printed on again. When the amount of surfactant used in the ink is also tuned down, the researchers show that their inks and processes can create fully functional, fully recyclable, fully water-based transistors.
“If we were using chemicals, we could just print multiple passes again and again until there were enough nanotubes. But water doesn’t work that way. We could do it 100 times and there’d still be the same density as the first time.”
Compared to a resistor or capacitor, a transistor is a relatively complex computer component used in devices such as power control or logic circuits and sensors. Franklin explains that, by demonstrating a transistor first, he hopes to signal to the rest of the field that there is a viable path toward making some electronics manufacturing processes much more environmentally friendly.
Franklin has already proven that nearly 100% of the carbon nanotubes and graphene used in printing can be recovered and reused in the same process, losing very little of the substances or their performance viability. Because nanocellulose is made from wood, it can simply be recycled or biodegraded like paper. And while the process does use a lot of water, it’s not nearly as much as what is required to deal with the toxic chemicals used in traditional fabrication methods.
According to a United Nations estimate, less than a quarter of the millions of pounds of electronics thrown away each year is recycled. And the problem is only going to get worse as the world eventually upgrades to 6G devices and the Internet of Things (IoT) continues to expand. So any dent that could be made in this growing mountain of electronic trash is important to pursue.
“The performance of our thin-film transistors doesn’t match the best currently being manufactured, but they’re competitive enough to show the research community that we should all be doing more work to make these processes more environmentally friendly.”
While more work needs to be done, Franklin says the approach could be used in the manufacturing of other electronic components like the screens and displays that are now ubiquitous to society. Every electronic display has a backplane of thin-film transistors similar to what is demonstrated in the paper. The current fabrication technology is high-energy and relies on hazardous chemicals as well as toxic gasses. The entire industry has been flagged for immediate attention by the US Environmental Protection Agency.
“The performance of our thin-film transistors doesn’t match the best currently being manufactured, but they’re competitive enough to show the research community that we should all be doing more work to make these processes more environmentally friendly,” Franklin said.
Original Article: Fully Recyclable Printed Electronics Ditch Toxic Chemicals for Water
More from: Duke University Pratt School of Engineering
The Latest Updates from Bing News
Go deeper with Bing News on:
Recyclable printed electronics
- The Surprising Benefits of Electronics Recycling on Your Wallet
Electronics recycling is a big business. See how to improve your personal finances by selling, trading, or scrapping your old phones and other devices.
- Recycle Your Outdated Electronics on Saturday, March 30
Mark your calendars for the 2024 Electronics & Hazardous Waste Recycling Event hosted by Senior Village from 9 a.m. to 12 p.m. at the MountainView Clubhouse lower parking lot on Saturday ...
- Public welcome to electronics recycling, paper shredding, and food pantry donation event at Edmonds College on March 2
Edmonds College will host an electronics recycling, paper shredding, and food pantry donation event open to the public from 9 a.m. to 12 p.m. on Saturday, March 2, in ...
- Consumer Reports: Best places to sell or recycle your old electronics
Some electronics contain hazardous materials, including lead, mercury, arsenic, and cadmium, that's why they can't go out with your regular trash or recycling. Yet, one estimate from the EPA says ...
- Don’t recycle your old CPU, put it on display instead
They’re made by Japanese manufacturer NBROS, and available from the Yodobashi webstore (thanks, Tom’s Hardware), though clearly you could probably make your own or have something similar 3D printed ..
Go deeper with Bing News on:
- Smartkem announces collaboration with FlexiIC to develop low-cost, rapid turnaround custom circuits using organic transistor technology
Smartkem (OTCQB: SMTK), a company seeking to reshape the world of electronics with its disruptive organic thin-film transistors (OTFTs) that have the potential to drive the next generation of displays ...
- Chemical Vapor Deposition Market to Total US$ 105 Billion by 2034, Expanding at an 8.30% CAGR | Future Market Insights, Inc.
Primarily, the proliferation of electronic devices has led to a greater application of chemical vapor deposition for producing thin-film transistors, capacitors, and other components. The rising ...
- 2025's iPhone 17 models could sport always-on displays and 120Hz ProMotion variable refresh rates just like the Pro models
The report says (via machine translation) that "Apple is likely to apply low-temperature polycrystalline oxide (LTPO) thin film transistor (TFT) organic light-diodes (OLED) to all four iPhone 17 ...
- Vinotemp’s Launches Vinoglow Cooler
The new Vinoglow coolers have an advanced control panel interface with a thin-film-transistor liquid crystal display. The system supports smart presets that define ideal temperatures for every kind of ...
- Carbon nanotubes make optical sensor flexible and ultrathin
A flexible, ultrathin optical sensor that uses carbon nanotubes to convert light into electrical signals has been unveiled by Rei Kawabata and colleagues. The team at Japan’s Osaka University says ...