Researchers have designed a state-of-the-art walking robot that could revolutionize large construction projects in space. They tested the feasibility of the robot for the in-space assembly of a 25m Large Aperture Space Telescope. They present their findings in Frontiers in Robotics and AI. A scaled-down prototype of the robot also showed promise for large construction applications on Earth.
Maintenance and servicing of large constructions are nowhere more needed than in space, where the conditions are extreme and human technology has a short lifespan. Extravehicular activities (activities done by an astronaut outside a spacecraft), robotics, and autonomous systems solutions have been useful for servicing and maintenance missions and have helped the space community conduct ground-breaking research on various space missions. Advancements in robotics and autonomous systems facilitate a multitude of in-space services. This includes, but is not limited to, manufacturing, assembly, maintenance, astronomy, earth observation, and debris removal.
With the countless risks involved, only relying on human builders is not enough, and current technologies are becoming outdated.
“We need to introduce sustainable, futuristic technology to support the current and growing orbital ecosystem,” explained corresponding author Manu Nair, PhD candidate at the University of Lincoln.
“As the scale of space missions grows, there is a need for more extensive infrastructures in orbit. Assembly missions in space would hold one of the key responsibilities in meeting the increasing demand.”
In their paper, Nair and his colleagues introduced an innovative, dexterous walking robotic system that can be used for in orbit assembly missions. As a use case, the researchers tested the robot for the assembly of a 25m Large Aperture Space Telescope (LAST).
Assembling telescopes in orbit
Ever since the launch of the Hubble Space Telescope and its successor, the James Webb Space Telescope, the space community has been continuously moving towards deploying newer and larger telescopes with larger apertures (the diameter of the light collecting region).
Assembling such telescopes, such as a 25m LAST, on Earth is not possible with our current launch vehicles due to their limited size. That is why larger telescopes ideally need to be assembled in space (or in orbit).
“The prospect of in-orbit commissioning of a LAST has fueled scientific and commercial interests in deep-space astronomy and Earth observation,” said Nair.
To assemble a telescope of that magnitude in space, we need the right tools: “Although conventional space walking robotic candidates are dexterous, they are constrained in maneuverability. Therefore, it is significant for future in-orbit walking robot designs to incorporate mobility features to offer access to a much larger workspace without compromising the dexterity.”
The researchers proposed a seven degrees-of-freedom fully dexterous end-over-end walking robot (a limbed robotic system that can move along a surface to different locations to perform tasks with seven degrees of motion capabilities), or, in short, an E-Walker.
They conducted an in-depth design engineering exercise to test the robot for its capabilities to efficiently assemble a 25m LAST in orbit. The robot was compared to the existing Canadarm2 and the European Robotic Arm on the International Space Station. Additionally, a scaled down prototype for Earth-analog testing was developed and another design engineering exercise performed.
“Our analysis shows that the proposed innovative E-Walker design proves to be versatile and an ideal candidate for future in-orbit missions. The E-Walker would be able to extend the life cycle of a mission by carrying out routine maintenance and servicing missions post assembly, in space” explained Nair.
“The analysis of the scaled-down prototype identifies it to also be an ideal candidate for servicing, maintenance, and assembly operations on Earth, such as carrying out regular maintenance checks on wind turbines.”
Yet a lot remains to be explored. The research was limited to the design engineering analysis of a full-scale and prototype model of the E-Walker. Nair explained: “The E-Walker prototyping work is now in progress at the University of Lincoln; therefore, the experimental verification and validation will be published separately.”
More from: University of Lincoln
The Latest Updates from Bing News
Go deeper with Bing News on:
In-orbit walking robot
- This AI-powered robot dog looks like something from The Terminator
Domo Arigato, Roboto Doggo. Tecno Mobile has announced the Dynamic 1, an AI-enhanced robot dog for your household.
- Robot snaps 1st photo of the moon before its historic landing
Before the landing, Odysseus was instructed to enter the Moon's orbit in preparation for the touchdown, and while the lander approached the Moon's orbit, it captured its target with its Terrain ...
- Private US moon lander reaches lunar orbit ahead of touchdown attempt
A moon lander built by Houston-based company Intuitive Machines reached lunar orbit on Wednesday, headed for an attempt at the first U.S. touchdown on Earth's nearest celestial neighbor in more than ...
- Scientists on Earth use robot to perform 'surgery' in space
Craig Chandler/UNL/SWNS Scientists have successfully performed “surgery” in orbit using a remote-controlled robot aboard the International Space Station. The surgical robot, named spaceMIRA ...
- An astronaut controls a robotic dog from orbit
Future astronauts could control rovers on the moon or Mars from a spacecraft in orbit. Until now, only wheeled rovers have been part of the tests, but now they have added a dog-like robot called Bert.
Go deeper with Bing News on:
Robotic in-space assembly
- Nio Ventures into Robotics: Testing Humanoid Robots on Factory Assembly Lines
C hinese electric vehicle startup Nio has revealed it is testing humanoid robots on an assembly line at one of its factories. In this regard, on February 22, 2024, Hong Kong-liste ...
- Autonomous Robotic Arm System Aims to Advance Space Station Robotics
GITAI is gearing up to test a novel autonomous robotic arm system on the exterior of the International Space Station (ISS).
- Super-lightweight Robot Friendly Modular Construction for Bridges and Space Colonization
We describe the system design and experimental results from a 256–unit cell assembly demonstration and lattice ... performance realm appropriate for applications like space structures. With simple ...
- NASA Summons Armies of Inchworm Robots to Build Us Homes in Space
Sure, our species has a real knack for assembling structures in space, but their component parts need to be made here on Earth, loaded onto a rocket, and then propelled to space for assembly.
- The ISS Is Getting a New Pair of Creepy Robot Arms
Once they reach space, the robot arms will be attached to the outside ... S2 is designed to carry out maintenance, inspection, assembly, and life-extension operations for satellites, according ...