In light sheet 3D printing, red and blue laser light is used to print objects precisely and quickly on a micrometer scale
(Photo: Vincent Hahn, KIT)
Researchers from the Cluster of Excellence “3D Matter Made to Order” Print Microstructures by Crossing Red and Blue Laser Beams
Printing objects from plastic precisely, quickly, and inexpensively is the goal of many 3D printing processes. However, speed and high resolution remain a technological challenge. A research team from the Karlsruhe Institute of Technology (KIT), Heidelberg University, and the Queensland University of Technology (QUT) has come a long way toward achieving this goal. It developed a laser printing process that can print micrometer-sized parts in the blink of an eye. The international team published the work in Nature Photonics. (DOI: 10.1038/s41566-022-01081-0)
Stereolithography 3D printing is currently one of the most popular additive manufacturing processes for plastics, both for private and industrial applications. In stereolithography, the layers of a 3D object are projected one by one into a container filled with resin. The resin is cured by UV light. However, previous stereolithography methods are slow and have too low a resolution. Light-sheet 3D printing, which is used by the KIT researchers, is a fast and high-resolution alternative.
3D Printing with Two Colors in Two Stages
In light-sheet 3D printing, blue light is projected into a container filled with a liquid resin. The blue light pre-activates the resin. In a second stage, a red laser beam provides the additional energy needed to cure the resin. However, 3D printing can only print quickly resins that quickly return from their pre-activated state to their original state. Only then can the next layer be printed. Consequently, the return time dictates the waiting time between two successive layers and thus the printing speed. “For the resin we used, the return time was less than 100 microseconds, which allows for high printing speeds,” says first author Vincent Hahn from KIT’s Institute of Applied Physics (APH).
Micrometer-sized Structures in Just the Blink of an Eye
To take advantage of this new resin, the researchers built a special 3D printer. In this printer, blue laser diodes are used to project images into the liquid resin using a high-resolution display with a high frame rate. The red laser is formed into a thin “light sheet” beam and crosses the blue beam vertically in the resin. With this arrangement, the team was able to 3D print micrometer-sized parts in a few hundred milliseconds, i.e. in the blink of an eye. However, it should not stop there: “With more sensitive resins, we could even use LEDs instead of lasers in our 3D printer,” says Professor Martin Wegener of APH. “Ultimately, we want to print 3D structures that are centimeters in size, while maintaining micrometer resolution and high printing speeds.”
Original Article: Joining Forces: Fast-as-lightning 3D Microprinting with Two Lasers
The Latest Updates from Bing News
Go deeper with Bing News on:
Light-sheet 3D printing
- This 3D Printer Works In Your Body to Repair Bones and Guts
The technique created complex shapes such as letters and spirals through a pig’s heart, belly fat, and kidney.
- M. Holland 3D Printing
M. Holland’s 3D Printing Group offers unbiased consultative expertise on applications, materials and equipment for additive manufacturing. We also offer industrial 3D printing services in our ...
- Print Panther Direct Installs JETvarnish 3D Evolution Press.
Print Panther Direct purchased Konica Minolta’s JETvarnish 3DS embellishment press in 2017, and after five years deemed it a natural step to upgrade to the JETvarnish 3D Evolution. With a much more ...
- The Top 3D Printing Applications in Sports
The padding consists of complex GiRer structures that are very light but absorb impacts better than conventional materials. The 3D printing therefore enables a better fit and a lower weight of the ...
- Researchers developing ‘revolutionary’ multi-material for light-based 3D printing
Researchers at Iowa State University and the University of California, Santa Barbara think they can do just that by fundamentally changing Digital Light Processing – a type of 3D printing ...
Go deeper with Bing News on:
Faster 3D printing
- 3D Printed Spikes From BMW Are Being Used to Make Bobsledding Faster
BMW is making 3D printed spikes for bobsled shoes in order to make the athletes faster in upcoming championship competitions.
- Graphene oxide used to strengthen and electrify 3D-printed concrete
D-printed concrete structures are claimed to be faster and cheaper to build than their traditional counterparts, but they're not always as strong. That problem may soon be solved by adding a pinch of ...
- Best 3D printer for small business 2023: Professional 3D printers
The best 3D printer for small business can tackle high-resolution prints and help take the business to new heights. 3D printers are getting faster and making higher quality items, making now a great ...
- Renishaw’s Tempus: An Algorithm for Faster Metal 3D Printing
We learned about Renishaw’s new metal 3D printing technology, Tempus. Renishaw is a global company providing not only metal 3D printers, but a vast array of other manufacturing gear. Tempus is a new ...
- From Turbines To Valves: 3D Printing Transforms Energy Manufacturers
Major manufacturers in oil, gas, electric, and wind turn to 3D printing to produce critical parts aiming to reduce costs, drive innovation, and enhance sustainability.