via Martin Luther University of Halle-Wittenberg
The photovoltaic effect of ferroelectric crystals can be increased by a factor of 1,000 if three different materials are arranged periodically in a lattice.
This has been revealed in a study by researchers at Martin Luther University Halle-Wittenberg (MLU). They achieved this by creating crystalline layers of barium titanate, strontium titanate and calcium titanate which they alternately placed on top of one another. Their findings, which could significantly increase the efficiency of solar cells, were published in the journal Science Advances.
Electric crystals do not require a so-called pn junction to create the photovoltaic effect, in other words, no positively and negatively doped layers. This makes it much easier to produce the solar panels.
However, pure barium titanate does not absorb much sunlight and consequently generates a comparatively low photocurrent. The latest research has shown that combining extremely thin layers of different materials significantly increases the solar energy yield. “The important thing here is that a ferroelectric material is alternated with a paraelectric material. Although the latter does not have separated charges, it can become ferroelectric under certain conditions, for example at low temperatures or when its chemical structure is slightly modified,” explains Bhatnagar.
Bhatnagar’s research group discovered that the photovoltaic effect is greatly enhanced if the ferroelectric layer alternates not only with one, but with two different paraelectric layers. Yeseul Yun, a PhD student at MLU and first author of the study, explains: “We embedded the barium titanate between strontium titanate and calcium titanate. This was achieved by vaporising the crystals with a high-power laser and redepositing them on carrier substrates. This produced a material made of 500 layers that is about 200 nanometres thick.”
When conducting the photoelectric measurements, the new material was irradiated with laser light. The result surprised even the research group: compared to pure barium titanate of a similar thickness, the current flow was up to 1,000 times stronger – and this despite the fact that the proportion of barium titanate as the main photoelectric component was reduced by almost two thirds. “The interaction between the lattice layers appears to lead to a much higher permittivity – in other words, the electrons are able to flow much more easily due to the excitation by the light photons,” explains Akash Bhatnagar. The measurements also showed that this effect is very robust: it remained nearly constant over a six-month period.
Further research must now be done to find out exactly what causes the outstanding photoelectric effect. Bhatnagar is confident that the potential demonstrated by the new concept can be used for practical applications in solar panels. “The layer structure shows a higher yield in all temperature ranges than pure ferroelectrics. The crystals are also significantly more durable and do not require special packaging.”
More from: Martin Luther University of Halle-Wittenberg
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Solar cell efficiency
- U.S. Department of Energy launches new solar research group
This is a $20 million initiative designed to make cadmium telluride (CdTe) solar cells less expensive, more efficient and develop new markets for solar cell products.
- DOE launches CdTe solar cell group along with First Solar
DOE said that CdTe solar cells were first developed in the United States and are the second-most common photovoltaic technology in the world after silicon. It said that without strengthened domestic ...
- Solar is the cheapest power, and a literal light-bulb moment showed us we can cut costs and emissions even further
Recent extreme weather events have underscored the need to cut the CO₂ emissions that are driving up global temperatures. This requires a rapid transition of the energy economy to renewable energy ...
- Surface engineering for an 18.6% efficient large-area inverted perovskite solar cell
Scientists in China worked with nickel-oxide as a charge transport layer in a perovskite solar cell, and were able to overcome several of the performance challenges associated with this material ...
- Exploring the Future of PV — JA Solar’s n-type DeepBlue 4.0 X
Over the past decade, the growth of the global photovoltaics (PV) industry has been impressive, with significant technological developments made in both laboratory and industrial mass production. As ...
Go deeper with Google Headlines on:
Solar cell efficiency
Go deeper with Bing News on:
- Kent State receives nearly $1 million in grants for scientific research
A grant for $831,761 from the National Science Foundation will be used to teach students "to investigate ferroelectric nematic materials," which are liquid crystals used in LCD screens ...
- Kopin Receives $2M Development Contract for Defense In-Vehicle Display Imaging System
The new system will integrate Kopin high-brightness, high-resolution, low-power ferroelectric liquid crystal on silicon (FLCOS) microdisplay and custom optic into a heavily ruggedized custom ...
- Liquid Crystal Tunable Filters Market Expected to Witness a Sustainable Growth Over 2019 – 2027
micro-electromechanical systems (MEMS), ferroelectric material, and liquid crystals. Liquid crystal tunable filters (LCTFs) are extensively used in hyper-spectral imaging systems to successively ...
- Innovative Ferroelectric Material Could Enable Next-Generation Memory Devices (IMAGE)
The structure of yttrium (partially shaded orange) doped hafnia dioxide crystals exhibits ferroelectric polarization (blue arrows) that changes direction as the external electric field is reversed.
- 1.2 3D Imaging Devices
For this issue, we have prototyped a high-density 1-dimensional array of ferroelectric liquid crystal (FLC) pixels and shown that we can achieve higher contrast than commonly used nematic LCs.