Berkeley Lab scientists Brett Helms (left) and Corinne Scown hold samples of PDK plastic, a unique new material that can be recycled indefinitely – a vast improvement over traditional plastics, of which less than 10% is recycled at all. Only a small fraction of that fraction is recycled more than once before the material is dumped.
(Credit: Thor Swift/Berkeley Lab)
A multidisciplinary Berkeley Lab team has been working for several years to develop a game-changing plastic that, unlike traditional plastics, can be recycled indefinitely and is not made from petroleum.
Their latest milestone was the release of an analysis showing the feasibility and potential outcomes of launching the unique material, called poly(diketoenamine) or PDK, into the market at an industrial scale.
The team found that making products out of recycled PDK could quickly become as cheap as making the same item with new plastic polymers (a very small proportion of our current plastics are recycled, so most products are made from “virgin” plastic resin), while also reducing CO2 emissions and energy requirements of manufacturing. Furthermore, the scientists plan to develop a process to create the initial PDK resin using microbe-fermented plant material, meaning that the entire lifecycle of a PDK plastic product could be low-carbon or even carbon neutral.
Once the infrastructure for large-scale PDK production and recycling is developed, the scientists envision that PDK could replace traditional plastics in a variety of consumer products, from car parts to water bottles.
We spoke with two project leaders, Brett Helms and Corinne Scown, about the inspiration for PDK, shortfalls in our current recycling systems, and how this ambitious project is enabled by a diverse combination of scientific expertise.
Brett Helms is a chemist and fabrication scientist working at Berkeley Lab’s Molecular Foundry, a U.S. Department of Energy (DOE) user facility. Helms led the group that invented PDK more than three years ago, as part of a Laboratory Directed Research and Development (LDRD) Program project focused on creating a highly functional plastic alternative.
Corinne Scown is a scientist in Berkeley Lab’s Energy Technologies Area, and Vice President for the Life-cycle, Economics, and Agronomy Division at the Joint BioEnergy Institute (JBEI) – a DOE Bioenergy Research Center. Scown, an expert in the field of technoeconomic analysis, leads the design and development of processes for industrial-scale PDK production and recycling. By modeling how these systems would work on a large scale, her work identifies potential bottlenecks and predicts both cost and environmental impact, thereby helping materials scientists select the most efficient and sustainable technologies from an early stage.
Q. Brett, where did the idea or inspiration for PDK come from?
Brett: The way industry practices polymer recycling is changing. Currently, the approach relies on mechanical recycling where, after sorting and grinding, polymer waste is melted into a homogenized material whose characteristics have degraded along the way. In the future, chemical recycling is expected to play a bigger role, as it prioritizes recovery of high-value materials that can be reused in manufacturing. However, with current chemical recycling technology, very few polymers can be efficiently recycled, whether we measure efficiency on the basis of the energy required, the amount of CO2 emitted, or the amount of pristine material we recover for secondary resin manufacturing. We were aware of these challenges and approached the problem from that perspective. We tried to design PDKs as next-generation polymers that require only small amounts of energy to be chemically recycled back to their original monomers with high yields, such that carbon in PDKs can be recirculated across limitless cycles of remake-and-reuse.
Q. Corinne, what drew you to this work?
Corinne: I’ve done work on technoeconomic analysis and life-cycle assessment of biofuels for years now and, believe it or not, plastics are not a huge leap. We’ve been exploring bio-based products for some time now, and biopolymers were already interesting to us because we know that it’s crucial to find renewable alternatives for all the different products we make from the typical barrel of oil, not just fuels. Brett and Jay pulled me in when they were writing the proposal for this particular project and I was floored by the clarity of vision and how quickly it all came together. The idea of a polymer that can be recycled back to virgin-quality monomers with minimal energy input solves a lot of otherwise intractable problems with plastic waste.
Q. Brett, how did you get into materials science? Was there always a goal to create environmentally conscious materials, or did you start out with another goal?
Brett: I did undergraduate research with Shenda Baker at Harvey Mudd College, where we were studying the physics of polymers at interfaces. At some point, I realized that if I wanted to study interesting polymers, I might need to learn how to make them myself. Shenda introduced me to Craig Hawker, and I spent time learning polymer synthesis from him and Eva Harth at the IBM Almaden Research Center. Feeling more confident in my synthesis abilities, I then became interested in learning how to design function into polymers. That’s what led me to UC Berkeley, where I conducted my Ph.D. with Jean Fréchet, whose group was well known for its creativity in functional polymers. I also learned, in my postdoc with Bert Meijer, at the Eindhoven University of Technology in the Netherlands, how interactions between polymers and other materials are central to their function.
Working at a National Lab has really opened my eyes to the breadth in which materials make a difference in our lives, and increasingly in the sustainability of our life-choices. I hope that, in our work with rethinking polymer chemistry for the circular economy, we offer creative solutions that everyone can get excited by and learn from, and that people might be motivated to work with us to bring those solutions to the world, in line with our mission here at Berkeley Lab.
Original Article: The Story Behind Our Infinitely Recyclable Plastic
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Infinitely recyclable plastic
- L’Oréal unveils first cosmetic bottle made from enzymatic plastic recyclingon June 29, 2021 at 10:04 pm
L’Oréal has announced that Biotherm will become the first of its brands to launch a product in a bottle made from plastic entirely recycled using Carbios’ enzymatic technology. The bottles will be put ...
- Plastic, Perfectedon June 29, 2021 at 5:17 am
This article is currently available to Reason Digital subscribers only. If you are a Reason Digital subscriber, log in here. Or Subscribe to Reason Digital Now. Your Reason Digital subscription ...
- L’Oreal announces 1st cosmetic bottle made from recycled plasticon June 28, 2021 at 6:27 am
The plastic is entirely recycled using Carbios’ enzymatic technology, with L’Oreal aiming to put into production the bottles based on this disruptive innovation in 2025. Biotherm would be the first of ...
- Loop Industries: Pay No Attention to the Man Behind the Curtainon June 27, 2021 at 5:00 pm
In other words, rather than adding a percentage of recycled material to virgin PET, Loop PET would be 100% recycled material, which Loop notes in its various information pieces is “infinitely ...
- L’Oréal unveils cosmetic bottles made from Carbios’ enzymatic recycling processon June 24, 2021 at 5:00 pm
L’Oréal has unveiled the first plastic bottles made from enzymatic recycled material through the enzymatic process developed by green biotech company Carbios. The beauty giant aims to put into ...
Go deeper with Google Headlines on:
Infinitely recyclable plastic
Go deeper with Bing News on:
- ProdataKey unveils Map View for access control managementon July 2, 2021 at 7:42 am
ProdataKey (PDK), manufacturer of the leading cloud access control platform built for mobile, has introduced the latest enhancement to its Pdk io software interface, Map View.
- ProdataKey brings Map View to their Pdk software interface for users to control door locks by looking at the mobile screenon July 2, 2021 at 6:25 am
ProdataKey (PDK), the manufacturer of the cloud access control platform built for mobile, introduces the latest enhancement to its Pdk io software interface: Map View. The Map View feature ...
- Watch the 2022 Porsche 911 GT3 Stop Just Short of 200 MPH on the Autobahnon July 1, 2021 at 4:45 am
The Porsche 911 GT3 has never been the quickest or the fastest 911, yet it's the one that encapsulates the brand's spirit the best. It's about purity, about getting the most performance out of the ...
- AANES - PYD members who are kidnapped by PDKon June 29, 2021 at 2:05 am
Since June 10th, the fate of the representative of the Autonomous Administration of North and East and the two members of the Democratic Union Party is unknown, and the PDK has yet to raise any ...
- Your Own Open Source ASIC: SkyWater-PDK Plans First 130 Nm Wafer In 2020on June 28, 2021 at 5:00 pm
You might have caught Maya Posch’s article about the first open-source ASIC tools from Google and SkyWater Technology. It envisions increased access to make custom chips — Application Specific ...