The research breakthrough was achieved by a team led by Professor Yang Hyunsoo (left). Dr Raghav Sharma (right), the first author of the paper, is holding a chip embedded with about 50 spin-torque oscillators.
With the rise of the digital age, the amount of WiFi sources to transmit information wirelessly between devices has grown exponentially. This results in the widespread use of the 2.4GHz radio frequency that WiFi uses, with excess signals available to be tapped for alternative uses.
To harness this under-utilised source of energy, a research team from the National University of Singapore (NUS) and Japan’s Tohoku University (TU) has developed a technology that uses tiny smart devices known as spin-torque oscillators (STOs) to harvest and convert wireless radio frequencies into energy to power small electronics. In their study, the researchers had successfully harvested energy using WiFi-band signals to power a light-emitting diode (LED) wirelessly, and without using any battery.
“We are surrounded by WiFi signals, but when we are not using them to access the Internet, they are inactive, and this is a huge waste. Our latest result is a step towards turning readily-available 2.4GHz radio waves into a green source of energy, hence reducing the need for batteries to power electronics that we use regularly. In this way, small electric gadgets and sensors can be powered wirelessly by using radio frequency waves as part of the Internet of Things. With the advent of smart homes and cities, our work could give rise to energy-efficient applications in communication, computing, and neuromorphic systems,” said Professor Yang Hyunsoo from the NUS Department of Electrical and Computer Engineering, who spearheaded the project.
The research was carried out in collaboration with the research team of Professor Guo Yong Xin, who is also from the NUS Department of Electrical and Computer Engineering, as well as Professor Shunsuke Fukami and his team from TU. The results were published in Nature Communications on 18 May 2021.
Converting WiFi signals into usable energy
Spin-torque oscillators are a class of emerging devices that generate microwaves, and have applications in wireless communication systems. However, the application of STOs is hindered due to a low output power and broad linewidth.
While mutual synchronisation of multiple STOs is a way to overcome this problem, current schemes, such as short-range magnetic coupling between multiple STOs, have spatial restrictions. On the other hand, long-range electrical synchronisation using vortex oscillators is limited in frequency responses of only a few hundred MHz. It also requires dedicated current sources for the individual STOs, which can complicate the overall on-chip implementation.
To overcome the spatial and low frequency limitations, the research team came up with an array in which eight STOs are connected in series. Using this array, the 2.4 GHz electromagnetic radio waves that WiFi uses was converted into a direct voltage signal, which was then transmitted to a capacitor to light up a 1.6-volt LED. When the capacitor was charged for five seconds, it was able to light up the same LED for one minute after the wireless power was switched off.
In their study, the researchers also highlighted the importance of electrical topology for designing on-chip STO systems, and compared the series design with the parallel one. They found that the parallel configuration is more useful for wireless transmission due to better time-domain stability, spectral noise behaviour, and control over impedance mismatch. On the other hand, series connections have an advantage for energy harvesting due to the additive effect of the diode-voltage from STOs.
Commenting on the significance of their results, Dr Raghav Sharma, the first author of the paper, shared, “Aside from coming up with an STO array for wireless transmission and energy harvesting, our work also demonstrated control over the synchronising state of coupled STOs using injection locking from an external radio-frequency source. These results are important for prospective applications of synchronised STOs, such as fast-speed neuromorphic computing.”
To enhance the energy harvesting ability of their technology, the researchers are looking to increase the number of STOs in the array they had designed. In addition, they are planning to test their energy harvesters for wirelessly charging other useful electronic devices and sensors.
The research team also hopes to work with industry partners to explore the development of on-chip STOs for self-sustained smart systems, which can open up possibilities for wireless charging and wireless signal detection systems.
Original Article: NUS engineers harvest WiFi signals to power small electronics
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Harvesting WiFi signals
- Power Harvesting Challenge: Scavenge Some Power, Win Prizes
It’s a brand new day as the Power Harvesting Challenge begins ... is it enough to power a wireless rainfall sensor indefinitely? (After all, you only need those readings when it’s raining).
- Semtech, Ryoden and Renesas Electronics Launch Zero Carbon Solution with the LoRa Edge™ Platform and a RE Microcontroller
--(BUSINESS WIRE)--Semtech Corporation (Nasdaq: SMTC), a leading global supplier of high performance analog and mixed-signal semiconductors ... in Semtech’s Wireless and Sensing Products Group.
- Google's Latest Tracking Nightmare For Chrome Comes In Two Parts
Chrome has serious issues when it comes to protecting your security and your privacy. The world’s leading browser has issued one urgent fix after another this year, as high-risk exploits have been ...
- Teratonix: Meet the Team Harvesting Ambient RF Energy to Power IoT Devices and Benefit the Environment
Teratonix is a U.S.-based ambient radio frequency (RF) energy harvesting ... Wi-Fi routers around us, it’s understood they enable internet connectivity, but you may not realize all the signals ...
- Semtech, Ryoden and Renesas Electronics Launch Zero Carbon Solution with the LoRa Edge(TM) Platform and a RE Microcontroller
Semtech, Ryoden and Renesas Electronics Launch Zero Carbon Solution with the LoRa Edge(TM) Platform and a RE Microcontroller ...
Go deeper with Google Headlines on:
Harvesting WiFi signals
Go deeper with Bing News on:
- Energy Harvesting System Market Actual Need Outlook, Supportive Judgment | EnOcean GmbH, Schneider Electric, MAHLE GmbH
Report Ocean recently added a new report on the global Energy Harvesting System Market The report has a thorough analysis of the forecast period from 2021 2027 The study explores the global Energy ...
- Energous Announces 1W Active Energy Harvesting Developer Kit to Support Over-the-Air Wireless Charging for IoT Applications
Energous Corporation (NASDAQ: WATT), the developer of WattUp®, a revolutionary RF-based wireless charging technology that supports charging of electronic devices at-a-distance, today announced the ...
- North America Energy Harvesting Market Growth, Share, Demand and Applications Forecast to 2028
Market Research Report On The North American Energy Harvesting Market Depicts That The Industry Would Grow At A Cagr Of 10.31% In The Forecast Period 2020-2028. The United States And Canada Together ...
- Energy Harvesting Market to rise at CAGR of 11.35% through 2030 - Report by Market Research Future (MRFR)
Energy Harvesting Market Overview: According to a comprehensive research report by Market Research Future (MRFR), “Energy Harvesting Market Research Report, Energy Source, Technology, Application and ...
- Energy Harvesting System Market to Reach $1.05 Bn, Globally, by 2030 at 7.5% CAGR: Allied Market Research
Allied Market Research published a report, titled, "Energy Harvesting System Market by Technology (Light Energy Harvesting, Vibration ...