Bingyuan Ma holding a transparent capillary cell. Bai’s Lab at the McKelvey School of Engineering is the only one in the world with such diagnostic cells.
(Courtesy: Bai Lab)
One-of-a-kind tool helped solve anode puzzle that thwarted previous attempts
When it comes to batteries, lithium-ion are the best we have as far as energy density and convenience.
For now.
The Washington University in St. Louis lab of Peng Bai, assistant professor in the Department of Energy, Environmental & Chemical Engineering in the McKelvey School of Engineering, has developed a stable sodium ion battery that is highly efficient, will be less expensive to make and is significantly smaller than a traditional lithium ion battery due to the elimination of a once-necessary feature.
“We’ve found that the minimal is maximum,” Bai said. “No anode is the best anode.”
The research was published May 3, 2021, in the journal Advanced Science.
A traditional lithium ion battery consists of a cathode and anode, both of which store lithium ions; a separator to keep the electrodes separated on either side; and an electrolyte — the liquid through which the ions move. When lithium flows from the anode to the cathode, free electrons leave through the current collector to the device being powered while the lithium passes the separator to the cathode.
To charge, the process is reversed, and the lithium passes from the cathode, through the separator, to the anode.
The concept of replacing lithium with sodium and doing away with the anode isn’t new.
“We used old chemistry,” Bai said. “But the problem has been, with this well-known chemistry, no one ever showed this anode-free battery can have a reasonable lifetime. They always fail very quickly or have a very low capacity or require special processing of the current collector.”
Anode-free batteries tend to be unstable, growing dendrites — finger-like growths that can cause a battery to short or simply to degrade quickly. This conventionally has been attributed to the reactivity of the alkali metals involved, in this case, sodium.
In this newly designed battery, only a thin layer of copper foil was used on the anode side as the current collector, i.e., the battery has no active anode material. Instead of flowing to an anode where they sit until time to move back to the cathode, in the anode-free battery the ions are transformed into a metal. First, they plate themselves onto copper foil, then they dissolve away when it’s time to return to the cathode.
“In our discovery, there are no dendrites, no finger-like structures,” said Bingyuan Ma, the paper’s first author and a doctoral student in Bai’s lab. The deposit is smooth, with a metal luster. “This kind of growth mode has never been observed for this kind of alkali metal.”
“Observing” is key. Bai has developed a unique, transparent capillary cell that offers a new way to look at batteries. Traditionally, when a battery fails, in order to determine what went wrong, a researcher can open it up and take a look. But that after-the-fact kind of observation has limited usefulness.
“All of the battery’s instabilities accumulate during the working process,” Bai said. ”What really matters is instability during the dynamic process, and there’s no method to characterize that.” Watching Ma’s anode-free capillary cell, “We could clearly see that if you don’t have good quality control of your electrolyte, you’ll see various instabilities,” including the formation of dendrites, Bai said.
Essentially, it comes down to how much water is in the electrolyte.
Alkali metals react with water, so the research team brought the water content down. “We were hoping just to see a good performance,” Bai said. Watching the battery in action, the researchers shortly saw shiny, smooth deposits of sodium. It’s the smoothness of the material that eliminates morphological irregularities that can lead to the growth of dendrites.
Original Article: Bai lab develops stable, efficient, anode-free sodium battery
More from: Washington University in St. Louis
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Anode-free sodium battery
- Calcium battery passes test of running for multiple cycles
A research group at Japan’s Tohoku University has developed a prototype calcium metal rechargeable battery capable of 500 cycles of repeated charge-discharge – the benchmark for practical use. However ...
- New priming method improves battery life, efficiency
Engineers have developed a readily scalable method to optimize a silicon anode priming method that increases lithium-ion battery performance by 22% to 44%. Silicon anode batteries have the ...
- Danny Huh of NEO Battery on EV Industry Attention as it Revolutionizes Silicon Anode Technology
In this InvestorIntel interview, Tracy Weslosky talks with NEO Battery Materials Ltd.’s (TSXV: NBM | OTCQB: NBMFF) Strategy and Operations Manager Danny Huh about achieving a significant technology ...
- Researchers develop calcium rechargeable battery with long cycle life
A research group has developed a prototype calcium (Ca) metal rechargeable battery capable of 500 cycles of repeated charge-discharge—the benchmark for practical use.
- Battery anode facility, Madagascar
NextSource plans to build multiple BAFs in stages worldwide, in key jurisdictions that can produce commercial-scale graphite anode material for lithium-ion batteries used in electric vehicle ...
Go deeper with Google Headlines on:
Anode-free sodium battery
[google_news title=”” keyword=”anode-free sodium battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Sodium ion battery
- Solar Promotion GmbH: ees Europe 2023: Major Progress in New Battery Technologies
One of them is the start-up company Kite-Rise Technology, who will be presenting sodium-ion solutions at the exhibition, while the Chinese company CATL has announced it will be going into series ...
- To meet energy demand, creating new battery chemistries is key
Johan Söderbom at EIT InnoEnergy argues that creating new battery chemistries is key to addressing the rising demand in the battery industry ...
- As Lithium Prices Rally, Sodium-ion Batteries Emerge As A Sweet Spot
Sodium-ion batteries (SIBs) have emerged as a potential alternative to traditional lithium-ion batteries (LIBs) for automotive applications. So, what are SIBs and how do they diff ...
- CBAK Partners with Hello Tech, the parent company of Jackery, a premier global portable power supplier, to Advance Sodium-ion Battery R&D
Secured RMB25 million in funding from Hello Tech for Sodium-ion Battery R&D Program Hello Tech, as CBAK Energy's first client for sodium-ion batteries with orders potentially worth several hundred ...
- CBAK Partners with Hello Tech, the parent company of Jackery, a premier global portable power supplier, to Advance Sodium-ion Battery R&D
Secured RMB25 million in funding from Hello Tech for Sodium-ion Battery R&D Program Hello Tech, as CBAK Energy's first client for sodium-ion batteries with orders potentially worth several hundred ...
Go deeper with Google Headlines on:
Sodium ion battery
[google_news title=”” keyword=”sodium ion battery” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
