Researchers at Chalmers have in experimental studies produced a structural battery that is ten times better than all the previous ones. It contains carbon fiber that works in parallel as an electrode, current conductor and load-bearing material. The battery opens the door for so-called “weightless” energy storage in, for example, vehicles and craft.
The batteries in today’s electric cars make up a large part of the vehicles’ weight, nor do they fulfill any load-bearing function. A structural battery, on the other hand, can function both as a battery and be part of the structure in, for example, a car body. This is called weightless energy storage because the mass of the battery “disappears” when the battery becomes part of the load-bearing structure. Calculations show that with this type of multifunctional batteries you could greatly reduce the weight of a car.
The development of structural batteries is based on previous research where it was discovered that certain types of carbon fiber, in addition to being stiff and strong, also proved to have a good ability to store electrical energy chemically. These discoveries were named in 2018, by reputable Physics World, as one of the year’s ten biggest breakthroughs.
The first attempt to make a structural battery was made as early as 2007 at the Army Research Laboratory in the USA, but so far it has proved difficult to manufacture batteries with both good electrical and mechanical properties. Now, however, the development takes a real step forward when researchers at Chalmers, in a collaborative project with KTH, can demonstrate a structural battery with combined properties that far exceeds anything previously manufactured, in terms of electrical energy storage, rigidity and strength. If you look at the multifunctional performance, it is 10 times higher than with other structural batteries.
The battery has an energy density of 24 Wh / kg, which means approximately 20 percent capacity compared to comparable lithium-ion batteries on the market today. But since the weight of the products can be greatly reduced, not as much energy will be required to drive an electric car, for example. If you can use a lower energy density, safety will also increase. With a stiffness of 25 GPa, the structural battery can compete with several other construction materials.
Previous attempts to make structural batteries have resulted in cells with either good mechanical or good electrical properties. Here, by using carbon fibers, we succeed in demonstrating a structural battery with competitive energy storage capacity and rigidity, says Leif Asp, professor at Chalmers and leader of the project.
Super light laptops and electric bikes may soon be a reality
The new battery has a negative carbon fiber electrode, and a counter electrode made of a lithium iron phosphate coated aluminum foil. They are separated by a fiberglass fabric in an electrolyte matrix. Despite the fact that they have succeeded in creating a structural battery that is ten times better than all the previous ones, the materials were not chosen to break records, but to provide an increased understanding of the effects of material architecture and separator thickness.
A new project, financed by the Swedish Space Agency, is already underway, where the performance of the structural battery will be further increased. The aluminum foil will be replaced with a carbon fiber as a load-bearing material in the positive electrode. It will provide both increased rigidity and energy density. The fiberglass separator will be replaced with an ultra-thin variant, which will give a much greater effect, which also means faster loading and unloading. The new project is expected to be completed within two years.
Leif Asp, who is also leading this project, estimates that such a battery could reach an energy density of 75 Wh / kg and a stiffness of 75 GPa. This means that the battery is about as strong as aluminum but with a comparatively much lower weight.
– The next generation structural battery has very great potential. If you look at consumer technology, it will be quite possible within a few years to be able to manufacture laptops, smart phones or electric bikes that weigh half as much as today, and are much more compact. A smartphone, for example, could be built very thin, says Leif Asp.
In the longer term, it is definitely conceivable that electric cars, electric planes and satellites will be designed and supplied with energy by structural batteries.
Original Article: Big breakthrough for “weightless” energy storage
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- Proliferation of electric vehicles based on high-performance, low-cost sodium-ion batteryon June 18, 2021 at 9:34 am
Various automobile companies are preparing to shift from internal combustion (IC) engine vehicles to electric vehicles (EVs). However, due to higher cost, EVs are not as easily accessible to consumers ...
- GaN low-voltage designs enable compact three-phase motor inverter ICon June 16, 2021 at 8:08 am
In battery-powered applications, in the automotive sector and in IT infrastructures 48V technology is on the rise. In this voltage class, gallium nitride (GaN) power transistors offer the best ...
- Multi-material EV Battery Enclosure Takes on Heavy Metalon June 15, 2021 at 5:00 pm
Continental Structural Plastics (CSP), along with its parent company Teijin, has unveiled an innovative honeycomb Class A panel technology and an advanced, multi-material EV battery enclosure that can ...
- Airedale Hospital is mostly made of material 'known for its structural deficiences' and must be rebuilt, Keighley MP Robbie Moore urges governmenton June 14, 2021 at 11:50 pm
A Yorkshire Tory MP will lobby the Government to completely rebuild a half-century-old local hospital building which is made largely out of a construction material "known for its structural ...
- Composite insert acts as structural reinforcement for Porsche A-pillarson June 14, 2021 at 5:01 pm
This structure is heat activated with the L-5235 structural foam developed by L&L Products ... B- and C-pillars, load-bearing battery parts or door components that are critical to safety. The hybrid ...
Go deeper with Google Headlines on:
Go deeper with Bing News on:
Weightless energy storage
- UK consortium developing high pressure hydrogen storage tank for transportationon June 18, 2021 at 4:47 am
A consortium of UK companies have joined forces to develop a novel, high pressure hydrogen storage tank aimed for use in large good vehicles (HGV), bus and off highway applications. The companies ...
- UK consortium takes lead on next-gen hydrogen storage tankson June 18, 2021 at 1:14 am
A consortium of UK companies, Ultima Forma, Lentus Composites and the National Composites Centre (NCC), have joined forces to develop a novel, high pressure hydrogen storage tank aimed for use in HGV, ...
- Loop Energy to provide fuel cell system for 8-meter minibus with Mobility & Innovation a.s. in Slovakiaon June 17, 2021 at 12:15 am
Slovakia-based Mobility & Innovation a.s. (M&I) has ordered Loop Energy’s S300 fuel cell module to fuel the electric powertrain of its new 8-meter transit bus as part of the company’s M&I composite ...
- Loop Energy to Fuel 8-Meter Minibus with Mobility & Innovation a.s. in Slovakiaon June 16, 2021 at 9:00 am
Loop Energy (TSX: LPEN), a developer and manufacturer of hydrogen fuel cell-based solutions, announces the order of the company’s S300 fuel cell modul ...
- 6 scientific reasons why it’s easier for men to lose weighton June 14, 2021 at 3:45 am
You’ve tried every diet out there. You spend hours at the gym each week. You drink your water and get plenty of sleep. And still, your husband loses more weight than you do when he simply cuts ...