(a) Scanning electron image of one of the Foundry-fabricated quantum dot devices. Four quantum dots can be formed in the silicon (dark grey), using four independent control wires (light grey). These wires are the control knobs that enable the so called quantum gates. (b) Schematic of the two-dimensional array device. Each Qubit (red circle) can interact with its nearest neighbor in the two-dimensional network, and circumvent a Qubit that fails for one reason or other. This setup is what “second dimension” means.
QUANTUM COMPUTER: One of the obstacles for progress in the quest for a working quantum computer has been that the working devices that go into a quantum computer and perform the actual calculations, the qubits, have hitherto been made by universities and in small numbers. But in recent years, a pan-European collaboration, in partnership with French microelectronics leader CEA-Leti, has been exploring everyday transistors–that are present in billions in all our mobile phones—for their use as qubits.
The French company Leti makes giant wafers full of devices, and, after measuring, researchers at the Niels Bohr Institute, University of Copenhagen, have found these industrially produced devices to be suitable as a qubit platform capable of moving to the second dimension, a significant step for a working quantum computer. The result is now published in Nature Communications.
Quantum dots in two dimensional array is a leap ahead
One of the key features of the devices is the two-dimensional array of quantum dot. Or more precisely, a two by two lattice of quantum dots. “What we have shown is that we can realize single electron control in every single one of these quantum dots. This is very important for the development of a qubit, because one of the possible ways of making qubits is to use the spin of a single electron. So reaching this goal of controlling the single electrons and doing it in a 2D array of quantum dots was very important for us”, says Fabio Ansaloni, former PhD student, now postdoc at center for Quantum Devices, NBI.
Using electron spins has proven to be advantageous for the implementation of qubits. In fact, their “quiet” nature makes spins weakly interacting with the noisy environment, an important requirement to obtain highly performing qubits.
Extending quantum computers processors to the second dimension has been proven to be essential for a more efficient implementation of quantum error correction routines. Quantum error correction will enable future quantum computers to be fault tolerant against individual qubit failures during the computations.
The importance of industry scale production
Assistant Professor at Center for Quantum Devices, NBI, Anasua Chatterjee adds: “The original idea was to make an array of spin qubits, get down to single electrons and become able to control them and move them around. In that sense it is really great that Leti was able to deliver the samples we have used, which in turn made it possible for us to attain this result. A lot of credit goes to the pan-European project consortium, and generous funding from the EU, helping us to slowly move from the level of a single quantum dot with a single electron to having two electrons, and now moving on to the two dimensional arrays. Two dimensional arrays is a really big goal, because that’s beginning to look like something you absolutely need to build a quantum computer. So Leti has been involved with a series of projects over the years, which have all contributed to this result.”
The credit for getting this far belongs to many projects across Europe
The development has been gradual. In 2015, researchers in Grenoble succeeded in making the first spin qubit, but this was based on holes, not electrons. Back then, the performance of the devices made in the “hole regime” were not optimal, and the technology has advanced so that the devices now at NBI can have two dimensional arrays in the single electron regime. The progress is threefold, the researchers explain: “First, producing the devices in an industrial foundry is a necessity. The scalability of a modern, industrial process is essential as we start to make bigger arrays, for example for small quantum simulators. Second, when making a quantum computer, you need an array in two dimensions, and you need a way of connecting the external world to each qubit. If you have 4-5 connections for each qubit, you quickly end up with a unrealistic number of wires going out of the low-temperature setup. But what we have managed to show is that we can have one gate per electron, and you can read and control with the same gate. And lastly, using these tools we were able to move and swap single electrons in a controlled way around the array, a challenge in itself.”
Two dimensional arrays can control errors
Controlling errors occurring in the devices is a chapter in itself. The computers we use today produce plenty of errors, but they are corrected through what is called the repetition code. In a conventional computer, you can have information in either a 0 or a 1. In order to be sure that the outcome of a calculation is correct, the computer repeats the calculation and if one transistor makes an error, it is corrected through simple majority. If the majority of the calculations performed in other transistors point to 1 and not 0, then 1 is chosen as the result. This is not possible in a quantum computer since you cannot make an exact copy of a qubit, so quantum error correction works in another way: State-of-the-art physical qubits do not have low error rate yet, but if enough of them are combined in the 2D array, they can keep each other in check, so to speak. This is another advantage of the now realized 2D array.
The next step from this milestone
The result realized at the Niels Bohr Institute shows that it is now possible to control single electrons, and perform the experiment in the absence of a magnetic field. So the next step will be to look for spins – spin signatures – in the presence of a magnetic field. This will be essential to implement single and two qubit gates between the single qubits in the array. Theory has shown that a handful of single and two qubit gates, called a complete set of quantum gates, are enough to enable universal quantum computation.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- SIMPLEX QUANTUM, Inc. Completes US Patent Registration of Electrocardiogram Biometric Authentication Technology
SIMPLEX QUANTUM, Inc. has completed registration in the United States of a patent for a system designed to accurately authenticate an individual's electrocardiogram (ECG) waveform data. Patent US ...
- World’s first e-passport that meets security needs of quantum computing era: Report
The prototype uses a quantum computer-resistant version of EAC protocol that secures the passport holder’s biometric information during authentication.
- Creating impact with Quantum Technologies: Uniper and Terra Quantum to apply hybrid quantum computing in the energy industry
In a joint effort, Uniper and Terra Quantum are exploring solutions that could harness the power of hybrid quantum computing to create real world business value After assessing quantum computing use ...
- New quantum computing feat is a modern twist on a 150-year-old thought experiment
A team of quantum engineers at UNSW Sydney has developed a method to reset a quantum computer—that is, to prepare a quantum bit in the '0' state—with very high confidence, as needed for reliable ...
- UCL Computer Science To Explore Natural Language Processing On Quantum Computers For Content Discovery and Archive Retrieval
Ilyas Khan, founder of Cambridge Quantum Computing and CEO of Quantinuum said: "Developing quantum computing so that the broadest and most diverse populations can benefit, means looking across the ...
Go deeper with Google Headlines on:
[google_news title=”” keyword=”Quantum computer” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]
Go deeper with Bing News on:
Transistors as qubits
- Quantum Mechanics In Your Processor: Tunneling And Transistors
Send enough electrons, and some will appear. Quantum tunneling is not a good thing when you’re trying to shrink transistors ever so smaller. Transistors need barriers. When electrons start ...
- Won’t Somebody, Please, Think Of The Transistors!
You probably also have a working knowledge that a germanium diode or a Schottky diode will have a lower forward voltage, and you’ll know in turn that a bipolar transistor will begin to turn on ...
- Quantum progress: How IBM, Microsoft, Google and Intel compare
This progress has allowed the company to reset qubits with high fidelity ... exceptional yield of quantum dot arrays using transistor fabrication technology. “The high yield and uniformity ...
- Quantum Computing 101: 5 Key Concepts to Understand
But experts say quantum computing has the potential to greatly enhance the technologies of today – including AI and ML algorithms – because of its ability to perform computations exponentially faster ...
- EDA Tools For Quantum Chips
“Moreover, tuning qubits and resonators and their coupling implies a repetitive ... because in the IC world wires and transistors are drawn as rectangles. “But increasingly, things of a curved nature ...
Go deeper with Google Headlines on:
Transistors as qubits
[google_news title=”” keyword=”transistors as qubits” num_posts=”5″ blurb_length=”0″ show_thumb=”left”]