MIT researchers have developed a two-layer passive cooling system, made of hydrogel and aerogel, that can keep foods and pharmaceuticals cool for days without the need for electricity. In this photo showing a close-up of the two-layer material, the upper layer consists of aerogel and the bottom layer of hydrogel.
Courtesy of the researchers
Inspired by camel fur, a new two-layered material could provide extended cooling to preserve the freshness of perishable goods.
Camels have evolved a seemingly counterintuitive approach to keeping cool while conserving water in a scorching desert environment: They have a thick coat of insulating fur. Applying essentially the same approach, researchers at MIT have now developed a system that could help keep things like pharmaceuticals or fresh produce cool in hot environments, without the need for a power supply.
Most people wouldn’t think of wearing a camel-hair coat on a hot summer’s day, but in fact many desert-dwelling people do tend to wear heavy outer garments, for essentially the same reason. It turns out that a camel’s coat, or a person’s clothing, can help to reduce loss of moisture while at the same time allowing enough sweat evaporation to provide a cooling effect. Tests have showed that a shaved camel loses 50 percent more moisture than an unshaved one, under identical conditions, the researchers say.
The new system developed by MIT engineers uses a two-layer material to achieve a similar effect. The material’s bottom layer, substituting for sweat glands, consists of hydrogel, a gelatin-like substance that consists mostly of water, contained in a sponge-like matrix from which the water can easily evaporate. This is then covered with an upper layer of aerogel, playing the part of fur by keeping out the external heat while allowing the vapor to pass through.
Hydrogels are already used for some cooling applications, but field tests and detailed analysis have shown that this new two-layer material, less than a half-inch thick, can provide cooling of more than 7 degrees Celsius for five times longer than the hydrogel alone — more than eight days versus less than two.
The findings are being reported today in a paper in the journal Joule, by MIT postdoc Zhengmao Lu, graduate students Elise Strobach and Ningxin Chen, Research Scientist Nicola Ferralis and Professor Jeffrey Grossman, head of the Department of Materials Science and Engineering.
The system, the researchers say, could be used for food packaging to preserve freshness and open up greater distribution options for farmers to sell their perishable crops. It could also allow medicines such as vaccines to be kept safely as they are delivered to remote locations. In addition to providing cooling, the passive system, powered purely by heat, can reduce the variations in temperature that the goods experience, eliminating spikes that can accelerate spoilage.
Ferralis explains that such packaging materials could provide constant protection of perishable foods or drugs all the way from the farm or factory, through the distribution chain, and all the way to the consumer’s home. In contrast, existing systems that rely on refrigerated trucks or storage facilities may leave gaps where temperature spikes can happen during loading and unloading. “What happens in just a couple of hours can be very detrimental to some perishable foods,” he says.
The basic raw materials involved in the two-layer system are inexpensive — the aerogel is made of silica, which is essentially beach sand, cheap and abundant. But the processing equipment for making the aerogel is large and expensive, so that aspect will require further development in order to scale up the system for useful applications. But at least one startup company is already working on developing such large-scale processing to use the material to make thermally insulating windows.
The basic principle of using the evaporation of water to provide a cooling effect has been used for centuries in one form or another, including the use of double-pot systems for food preservation. These use two clay pots, one inside the other, with a layer of wet sand in between. Water evaporates from the sand out through the outer pot, leaving the inner pot cooler. But the idea of combining such evaporative cooling with an insulating layer, as camels and some other desert animals do, has not really been applied to human-designed cooling systems before.
For applications such as food packaging, the transparency of the hydrogel and aerogel materials is important, allowing the condition of the food to be clearly seen through the package. But for other applications such as pharmaceuticals or space cooling, an opaque insulating layer could be used instead, providing even more options for the design of materials for specific uses, says Lu, who was the paper’s lead author.
The hydrogel material is composed of 97 percent water, which gradually evaporates away. In the experimental setup, it took 200 hours for a 5-millimeter layer of hydrogel, covered with 5 millimeters of aerogel, to lose all its moisture, compared to 40 hours for the bare hydrogel. The two-layered material’s cooling level was slightly less — a reduction of 7 degrees Celsius (about 12.6 degrees Fahrenheit) versus 8 C (14.4 F) — but the effect was much longer-lasting. Once the moisture is gone from the hydrogel, the material can then be recharged with water so the cycle can begin again.
Especially in developing countries where access to electricity is often limited, Lu says, such materials could be of great benefit. “Because this passive cooling approach does not rely on electricity at all, this gives you a good pathway for storage and distribution of those perishable products in general,” he says.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- Mold temperature control takes simplified approachon July 14, 2021 at 5:00 pm
It installs, power-free, right on the coolant line exiting the mold. On a basic level, it's really just a fancy thermostat-faster flow removes more heat, cooling the mold; slower flow removes less ...
- MSI Z390-A PRO LGA 1151 SATA 6Gb/s ATX Motherboardon October 18, 2020 at 9:56 pm
MSI motherboards been designed with tons of smart features for convenient setup and usage, such as pin-header keep out zone, friendly SATA & USB location and multiple cooling solutions, so DIY users ...
- Home coolingon February 10, 2020 at 5:25 pm
There are plenty of different options when it comes to cooling, but which one is right for your household? Fans? Air conditioning? Evaporation cooler? What about insulation? With so many options on ...
Go deeper with Google Headlines on:
Go deeper with Bing News on:
- Cooling Off China-US Technological Competition: A Blueprint in Shared Purposeon July 23, 2021 at 3:50 pm
Shared leadership on technological matters is crucial and cooler heads must prevail. , U.S President Joe Biden has maintained a robust, multidimensional counter posture against many of China’s policy ...
- Tired of Waking Up Sweaty? Stay Dry With These Cooling Bed Sheets and Pillowson July 23, 2021 at 9:34 am
Waking up drenched in sweat can take away the restfulness from sleep. Instead of feeling recharged, night sweats can leave you feeling extremely uncomfortable—and often annoyed. No one wants to wake ...
- Iceotope Announces OEM Agreement with Hewlett Packard Enterprise to Provide Liquid Cooling at the Edgeon July 22, 2021 at 6:05 am
Iceotope Technologies Ltd., a global leader in precision immersion cooling, today announced an OEM agreement with Hewlett Packard Enterprise (HPE) to offer its liquid-cooled chassis with HPE ProLiant ...
- The immersion cooling market is projected to grow from USD 243 million in 2021 to USD 700 million by 2026, at a CAGR of 23.6% from 2021 to 2026on July 22, 2021 at 1:22 am
Reportlinker.com announces the release of the report "Immersion Cooling Market by Type, Application, Cooling Fluid And ...
- Global Farm Milk Cooling Tanks Market 2021 Sales Channels, Technology and Production Analysis, Business Growth by 2026on July 21, 2021 at 8:15 pm
The research report proposed by MarketsandResearch.biz entitled Global Farm Milk Cooling Tanks Market 2021 by Manufacturers, Regions, Type and Application, Forecast to 2026 offers users excellent ...