With a novel layer to help the metallic components of the sensor bond, an international team of researchers printed sensors directly on human skin.
IMAGE: Ling Zhang, Penn State/Cheng Lab and Harbin Institute of Technology
Wearable sensors are evolving from watches and electrodes to bendable devices that provide far more precise biometric measurements and comfort for users. Now, an international team of researchers has taken the evolution one step further by printing sensors directly on human skin without the use of heat.
Led by Huanyu “Larry” Cheng, Dorothy Quiggle Career Development Professor in the Penn State Department of Engineering Science and Mechanics, the team published their results in ACS Applied Materials & Interfaces.
“In this article, we report a simple yet universally applicable fabrication technique with the use of a novel sintering aid layer to enable direct printing for on-body sensors,” said first author Ling Zhang, a researcher in the Harbin Institute of Technology in China and in Cheng’s laboratory.
Cheng and his colleagues previously developed flexible printed circuit boards for use in wearable sensors, but printing directly on skin has been hindered by the bonding process for the metallic components in the sensor. Called sintering, this process typically requires temperatures of around 572 degrees Fahrenheit (300 degrees Celsius) to bond the sensor’s silver nanoparticles together.
“The skin surface cannot withstand such a high temperature, obviously,” Cheng said. “To get around this limitation, we proposed a sintering aid layer — something that would not hurt the skin and could help the material sinter together at a lower temperature.”
By adding a nanoparticle to the mix, the silver particles sinter at a lower temperature of about 212 F (100 C).
“That can be used to print sensors on clothing and paper, which is useful, but it’s still higher than we can stand at skin temperature,” Cheng said, who noted that about 104 F (40 C) could still burn skin tissue. “We changed the formula of the aid layer, changed the printing material and found that we could sinter at room temperature.”
The room temperature sintering aid layer consists of polyvinyl alcohol paste — the main ingredient in peelable face masks — and calcium carbonate — which comprises eggshells. The layer reduces printing surface roughness and allows for an ultrathin layer of metal patterns that can bend and fold while maintaining electromechanical capabilities. When the sensor is printed, the researchers use an air blower, such as a hair dryer set on cool, to remove the water that is used as a solvent in the ink.
“The outcome is profound,” Cheng said. “We don’t need to rely on heat to sinter.”
The sensors are capable of precisely and continuously capturing temperature, humidity, blood oxygen levels and heart performance signals, according to Cheng. The researchers also linked the on-body sensors into a network with wireless transmission capabilities to monitor the combination of signals as they progress.
The process is also environmentally friendly, Cheng said. The sensor remains robust in tepid water for a few days, but a hot shower will easily remove it.
“It could be recycled, since removal doesn’t damage the device,” Cheng said. “And, importantly, removal doesn’t damage the skin, either. That’s especially important for people with sensitive skin, like the elderly and babies. The device can be useful without being an extra burden to the person using it or to the environment.”
Next, the researchers plan to alter the technology to target specific applications as needed, such as a precise on-body sensor network placed to monitor the particular symptoms associated with COVID-19.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- Researchers Develop Wireless Sensor That Measures Scratching To Improve Eczema And Other Anti-Itch Treatmentson May 17, 2021 at 5:03 pm
While the sensor was tested in patients with eczema, it can be used with any condition that causes children and adults to itch.
- Researchers Develop Wearable Sensor That Measures Scratching To Help Better Treat Patientson May 16, 2021 at 10:07 am
Millions of children in the U.S. have to cope with the constant itching of eczema. Now researchers have developed a new technology that can finally measure just how much someone is scratching and help ...
- Low cost exoskeleton manipulator using bidirectional triboelectric sensors enhanced multiple degree of freedom sensory systemon May 11, 2021 at 9:47 am
Next-generation flexible and wearable sensors are a promising technology to enhance the functionality of human-machine interfaces. Here, the authors report triboelectric bi-directional sensors ...
- Soft sensors are first to comprehensively monitor pregnant women without wireson May 10, 2021 at 12:00 pm
Laboring mothers have been wearing the same cumbersome, polyester fetal-monitoring belt for decades. Not only can these belts slip out of place, requiring constant adjustment, they—along with the ...
- Low cost wearable sensor is 50 times more sensitive than current sensorson May 10, 2021 at 9:33 am
The printed sensors are 50 times more sensitive than the industry standard and its flexibility outperforms comparable nano-enabled sensors. Maximizing sensitivity and flexibility without reducing ...
Go deeper with Google Headlines on:
Go deeper with Bing News on:
- AirBoss Closes BlackBox Biometrics Purchase, Appoints Matt Boccia to Lead Newly Formed Divisionon May 18, 2021 at 3:06 am
AirBoss of America‘s defense subsidiary has closed its acquisition of BlackBox Biometrics, a provider of wearable sensors designed to detect explosive blasts, through a potential $27 million deal that ...
- AirBoss Completes Acquisition of BlackBox Biometrics®, Developer of Blast Gauge® Systemon May 17, 2021 at 2:44 pm
AirBoss of America Corp. (TSX: BOS) (the “Company” or “AirBoss”) today announced that its subsidiary AirBoss Defense Group (“ADG”) has completed its previously announced acquisition of BlackBox ...
- New leaks hint at a smaller biometric chip on iPhone 13, custom-built processor for Pixel 6on May 17, 2021 at 9:48 am
Phone 13 may have a smaller notch enabled by the presence of a more compact chip to run Face ID biometrics. Will Pixel 6 have under-display fingerprint sensor?
- Apple updates Platform Security guide with details on iPhone Apple Watch unlock, Touch ID Magic Keyboardon May 17, 2021 at 8:17 am
Apple released its 2021 Platform Security guide back in February with new details on M1 Macs, iOS 14, macOS Big Sur, watchOS 7, and more. Now the guide has been updated with specifics on how Touch ID ...
- Consumer Biometrics and COVID Tech: This Week’s Top Mobile ID Storieson May 15, 2021 at 1:27 pm
Consumer biometrics and COVID-fighting tech were top of mind this week for Mobile ID World readers, if the latest roundup of our top stories is any indication.