On the right is a porous anodized aluminum oxide membrane. The left side shows the same membrane after coating it with a thin layer of gold, making the membrane conductive for electrochemical gas gating.
Electrically switchable system could continuously separate gases without the need for moving parts or wasted space.
A new system developed by chemical engineers at MIT could provide a way of continuously removing carbon dioxide from a stream of waste gases, or even from the air. The key component is an electrochemically assisted membrane whose permeability to gas can be switched on and off at will, using no moving parts and relatively little energy.
The membranes themselves, made of anodized aluminum oxide, have a honeycomb-like structure made up of hexagonal openings that allow gas molecules to flow in and out when in the open state. However, gas passage can be blocked when a thin layer of metal is electrically deposited to cover the pores of the membrane. The work is described today in the journal Science Advances, in a paper by Professor T. Alan Hatton, postdoc Yayuan Liu, and four others.
This new “gas gating” mechanism could be applied to the continuous removal of carbon dioxide from a range of industrial exhaust streams and from ambient air, the team says. They have built a proof-of-concept device to show this process in action.
The device uses a redox-active carbon-absorbing material, sandwiched between two switchable gas gating membranes. The sorbent and the gating membranes are in close contact with each other and are immersed in an organic electrolyte to provide a medium for zinc ions to shuttle back and forth. These two gating membranes can be opened or closed electrically by switching the polarity of a voltage between them, causing ions of zinc to shuttle from one side to the other. The ions simultaneously block one side, by forming a metallic film over it, while opening the other, by dissolving its film away.
When the sorbent layer is open to the side where the waste gases are flowing by, the material readily soaks up carbon dioxide until it reaches its capacity. The voltage can then be switched to block off the feed side and open up the other side, where a concentrated stream of nearly pure carbon dioxide is released.
By building a system with alternating sections of membrane that operate in opposite phases, the system would allow for continuous operation in a setting such as an industrial scrubber. At any one time, half of the sections would be absorbing the gas while the other half would be releasing it.
“That means that you have a feed stream coming into the system at one end and the product stream leaving from the other in an ostensibly continuous operation,” Hatton says. “This approach avoids many process issues” that would be involved in a traditional multicolumn system, in which adsorption beds alternately need to be shut down, purged, and then regenerated, before being exposed again to the feed gas to begin the next adsorption cycle. In the new system, the purging steps are not required, and the steps all occur cleanly within the unit itself.
The researchers’ key innovation was using electroplating as a way to open and close the pores in a material. Along the way the team had tried a variety of other approaches to reversibly close pores in a membrane material, such as using tiny magnetic spheres that could be positioned to block funnel-shaped openings, but these other methods didn’t prove to be efficient enough. Metal thin films can be particularly effective as gas barriers, and the ultrathin layer used in the new system requires a minimal amount of the zinc material, which is abundant and inexpensive.
“It makes a very uniform coating layer with a minimum amount of materials,” Liu says. One significant advantage of the electroplating method is that once the condition is changed, whether in the open or closed position, it requires no energy input to maintain that state. Energy is only required to switch back again.
Potentially, such a system could make an important contribution toward limiting emissions of greenhouse gases into the atmosphere, and even direct-air capture of carbon dioxide that has already been emitted.
While the team’s initial focus was on the challenge of separating carbon dioxide from a stream of gases, the system could actually be adapted to a wide variety of chemical separation and purification processes, Hatton says.
“We’re pretty excited about the gating mechanism. I think we can use it in a variety of applications, in different configurations,” he says. “Maybe in microfluidic devices, or maybe we could use it to control the gas composition for a chemical reaction. There are many different possibilities.”
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Carbon dioxide capture
- Carbon capture technology: What governments should doon June 10, 2021 at 7:20 pm
Given the high cost of technology and the inability of the private sector to embark on large-scale research and development on CCS, we are all expecting authentic leadership from the governments of ...
- Drax, Mitsubishi Plan Carbon-Capture Project at a Former Coal Planton June 10, 2021 at 12:31 pm
The so-called negative-emissions project would combine carbon capture and biomass, though the two companies are hoping for stronger government support.
- Mitsubishi moves green jobs to London with new carbon capture HQ after Drax dealon June 10, 2021 at 9:05 am
Carbon capture and storage is seen as a key way for Britain to meet its emissions targets and in today’s deal, Mitsubishi will deploy its technology at Drax’s huge Yorkshire energy plant. The plan ...
- Hearing set for pipeline to store carbon from synfuels planton June 10, 2021 at 8:00 am
North Dakota regulators will hold a public hearing next month for a project to capture more carbon dioxide from Basin Electric Power Cooperative’s Great Plains Synfuels Plant.
- Carbon Capture Investment Soars As CO2 Levels Hit Record Highon June 8, 2021 at 1:00 pm
Government investment in new carbon capture projects is soaring, and even traditional fossil fuel firms are jumping on board ...
Go deeper with Google Headlines on:
Carbon dioxide capture
Go deeper with Bing News on:
- Protozoan Parasite Aquaporinson June 5, 2021 at 5:00 pm
At the biophysical level, numerous attempts have been made to elucidate the mechanism of channel gating by examining the roles of each domain and their conformational changes during the channel ...
- Mike Krzuson May 30, 2021 at 5:00 pm
Before leaving Woodside Petroleum Ltd in 2007, he was responsible for its sub-surface technical oil and natural gas development capability and technology and its capital gating approval process. Prior ...
- DNAzyme Tunable Lead (II) Gating Based on Ion-Track Etched Conical Nanochannelson May 24, 2021 at 12:25 pm
A simple biomimetic ionic gate has been developed by modifying lead (Ⅱ) ions responsive DNAzymes onto the inner surface of ion-etched polymer nanochannels.
- ‘Tardy Gras’, strip club vaccines, lifeguard shortage: News from around our 50 stateson May 23, 2021 at 8:45 pm
On the other end, the oil and gas sector had 2,600 fewer jobs last ... category for COVID-19 infection risk, based on state gating criteria. Carlsbad’s La Cueva 6 reopened two weeks ago, and ...
- New study presents evaporation-driven transport control of small molecules along nanoslitson May 20, 2021 at 10:00 am
A research team, led by Professor Taesung Kim in the Department of Mechanical Engineering at UNIST presented the evaporation-driven transport-control of small molecules in gas-permeable and low ...