Most carbon-containing materials can be converted into graphene using a commercial CO2 infrared laser system. (Photo source: City University of Hong Kong)
Face masks have become an important tool in fighting against the COVID-19 pandemic. However, improper use or disposal of masks may lead to “secondary transmission”. A research team from City University of Hong Kong (CityU) has successfully produced graphene masks with an anti-bacterial efficiency of 80%, which can be enhanced to almost 100% with exposure to sunlight for around 10 minutes. Initial tests also showed very promising results in the deactivation of two species of coronaviruses. The graphene masks are easily produced at low cost, and can help to resolve the problems of sourcing raw materials and disposing of non-biodegradable masks.
The research is conducted by Dr Ye Ruquan, Assistant Professor from CityU’s Department of Chemistry, in collaboration with other researchers. The findings were published in the scientific journal ACS Nano, titled “Self-Reporting and Photothermally Enhanced Rapid Bacterial Killing on a Laser-Induced Graphene Mask”.
Commonly used surgical masks are not anti-bacterial. This may lead to the risk of secondary transmission of bacterial infection when people touch the contaminated surfaces of the used masks or discard them improperly. Moreover, the melt-blown fabrics used as a bacterial filter poses an impact on the environment as they are difficult to decompose. Therefore, scientists have been looking for alternative materials to make masks.
Converting other materials into graphene by laser
Dr Ye has been studying the use of laser-induced graphene in developing sustainable energy. When he was studying PhD degree at Rice University several years ago, the research team he participated in and led by his supervisor discovered an easy way to produce graphene. They found that direct writing on carbon-containing polyimide films (a polymeric plastic material with high thermal stability) using a commercial CO2 infrared laser system can generate 3D porous graphene. The laser changes the structure of the raw material and hence generates graphene. That’s why it is named laser-induced graphene.
Graphene is known for its anti-bacterial properties, so as early as last September, before the outbreak of COVID-19, producing outperforming masks with laser-induced graphene already came across Dr Ye’s mind. He then kick-started the study in collaboration with researchers from the Hong Kong University of Science and Technology (HKUST), Nankai University, and other organisations.
Excellent anti-bacterial efficiency
The research team tested their laser-induced graphene with E. coli, and it achieved high anti-bacterial efficiency of about 82%. In comparison, the anti-bacterial efficiency of activated carbon fibre and melt-blown fabrics, both commonly-used materials in masks, were only 2% and 9% respectively. Experiment results also showed that over 90% of the E. coli deposited on them remained alive even after 8 hours, while most of the E. coli deposited on the graphene surface were dead after 8 hours. Moreover, the laser-induced graphene showed a superior anti-bacterial capacity for aerosolised bacteria.
Dr Ye said that more research on the exact mechanism of graphene’s bacteria-killing property is needed. But he believed it might be related to the damage of bacterial cell membranes by graphene’s sharp edge. And the bacteria may be killed by dehydration induced by the hydrophobic (water-repelling) property of graphene.
Previous studies suggested that COVID-19 would lose its infectivity at high temperatures. So the team carried out experiments to test if the graphene’s photothermal effect (producing heat after absorbing light) can enhance the anti-bacterial effect. The results showed that the anti-bacterial efficiency of the graphene material could be improved to 99.998% within 10 minutes under sunlight, while activated carbon fibre and melt-blown fabrics only showed an efficiency of 67% and 85% respectively.
The team is currently working with laboratories in mainland China to test the graphene material with two species of human coronaviruses. Initial tests showed that it inactivated over 90% of the virus in five minutes and almost 100% in 10 minutes under sunlight. The team plans to conduct testings with the COVID-19 virus later.
Their next step is to further enhance the anti-virus efficiency and develop a reusable strategy for the mask. They hope to release it to the market shortly after designing an optimal structure for the mask and obtaining the certifications.
Dr Ye described the production of laser-induced graphene as a “green technique”. All carbon-containing materials, such as cellulose or paper, can be converted into graphene using this technique. And the conversion can be carried out under ambient conditions without using chemicals other than the raw materials, nor causing pollution. And the energy consumption is low.
“Laser-induced graphene masks are reusable. If biomaterials are used for producing graphene, it can help to resolve the problem of sourcing raw material for masks. And it can lessen the environmental impact caused by the non-biodegradable disposable masks,” he added.
Dr Ye pointed out that producing laser-induced graphene is easy. Within just one and a half minutes, an area of 100cm² can be converted into graphene as the outer or inner layer of the mask. Depending on the raw materials for producing the graphene, the price of the laser-induced graphene mask is expected to be between that of surgical mask and N95 mask. He added that by adjusting laser power, the size of the pores of the graphene material can be modified so that the breathability would be similar to surgical masks.
A new way to check the condition of the mask
To facilitate users to check whether graphene masks are still in good condition after being used for a period of time, the team fabricated a hygroelectric generator. It is powered by electricity generated from the moisture in human breath. By measuring the change in the moisture-induced voltage when the user breathes through a graphene mask, it provides an indicator of the condition of the mask. Experiment results showed that the more the bacteria and atmospheric particles accumulated on the surface of the mask, the lower the voltage resulted. “The standard of how frequently a mask should be changed is better to be decided by the professionals. Yet, this method we used may serve as a reference,” suggested Dr Ye.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Graphene face masks
- Graphene Used to Develop Face Masks That Kill Viruses, Bacteriaon February 23, 2021 at 4:00 pm
Hence, the new material is called “laser-induced graphene.” Solving Mask Issues While face masks have become a major tool in the fight against the coronavirus, they also can cause what’s called ...
- Don’t Stop Wearing A Face Mask Just Yet; COVID Is Still Very Much Around And So Is Pollutionon February 22, 2021 at 8:58 pm
You need to keep wearing masks when you are outdoors, to protect yourself and your family against COVID. But mind you, not all masks get the job done, and most certainly not those cheap fabric ones.
- Graphene “Nano-Origami” Creates Tiniest Microchips Yet – Could Make Computers and Phones Thousands of Times Fasteron February 18, 2021 at 9:31 am
Nanomaterial developments could lead to computers and phones running thousands of times faster. The tiniest microchips yet can be made from graphene and other 2D-materials, using a form of ...
- Sunlight sterilized, recyclable and super hydrophobic anti-COVID laser-induced graphene mask formulation for indelible usabilityon February 18, 2021 at 7:26 am
To minimize this global pandemic issue this proposal explores novel mechanism for further commercialization of surgical mask of photo-thermal and self-cleaning functionalization. Indeed, depositing ...
- New type of face mask reports extra protection against COVID-19on February 17, 2021 at 10:19 am
New studies show masks with graphene embedded in them help prevent the spread of COVID-19 even more than N95 masks, according to Medicevo President Ike Sutton. Graphene is a carbon that is ...
Go deeper with Google Headlines on:
Graphene face masks
Go deeper with Bing News on:
- GC INK™ NEUTRALIZES 100 PERCENT OF CORONAVIRUS AND INFLUENZA VIRUSES IN UNDER ONE MINUTEon March 2, 2021 at 7:01 am
GC Ink™ has been independently tested by Brown University to show 100 percent effectiveness at neutralizing coronavirus and influenza viruses in under one minute, and the findings have been published ...
- Study proposes a low cost, high efficiency mask designon March 1, 2021 at 11:21 pm
A new paper in Oxford Open Materials Science published by Oxford University Press presents low-cost modifications to existing N95 masks that prolongs their ef ...
- Groundbreaking Nanotech by RI Company Neutralizes 100% of Coronavirus in Under 1 Minute, Finds Brownon February 27, 2021 at 9:25 am
Graphene Composites (GC), a leading, global nano-materials engineering company with operations in Rhode Island, has announced that independent testing conducted by Brown University has shown its new ...
- Haydale Graphene Interim Loss Narrows On Declining Expenseson February 24, 2021 at 2:10 am
Haydale News Headlines. HAYD Share News. Financial News Articles for Haydale Graphene Industries Plc Ord 2P updated throughout the day.
- New Way to Recycle Waste Plastic Into Grapheneon February 23, 2021 at 4:00 pm
Researchers at Rice University have come up with a new and useful way to repurpose plastic waste into a carbon-based material that has numerous uses in scientific and commercial applications—graphene.