Schematic of a double thin film layered solar cell. The sun enters at the top and reaches the CIGS and CZTSSe layers that absorb the light and create positive and negative particles that travel to the top and bottom contact layers, producing electricity. IMAGE: AKHLESH LAKHTAKIA, PENN STATE
Solar cells have come a long way, but inexpensive, thin film solar cells are still far behind more expensive, crystalline solar cells in efficiency. Now, a team of researchers suggests that using two thin films of different materials may be the way to go to create affordable, thin film cells with about 34% efficiency.
“Ten years ago I knew very little about solar cells, but it became clear to me they were very important,” said Akhlesh Lakhtakia, Evan Pugh University Professor and Charles Godfrey Binder Professor of Engineering Science and Mechanics, Penn State.
Investigating the field, he found that researchers approached solar cells from two sides, the optical side — looking on how the sun’s light is collected — and the electrical side — looking at how the collected sunlight is converted into electricity. Optical researchers strive to optimize light capture, while electrical researchers strive to optimize conversion to electricity, both sides simplifying the other.
“I decided to create a model in which both electrical and optical aspects will be treated equally,” said Lakhtakia. “We needed to increase actual efficiency, because if the efficiency of a cell is less than 30% it isn’t going to make a difference.” The researchers report their results in a recent issue of Applied Physics Letters.
Lakhtakia is a theoretician. He does not make thin films in a laboratory, but creates mathematical models to test the possibilities of configurations and materials so that others can test the results. The problem, he said, was that the mathematical structure of optimizing the optical and the electrical are very different.
Solar cells appear to be simple devices, he explained. A clear top layer allows sunlight to fall on an energy conversion layer. The material chosen to convert the energy, absorbs the light and produces streams of negatively charged electrons and positively charged holes moving in opposite directions. The differently charged particles get transferred to a top contact layer and a bottom contact layer that channel the electricity out of the cell for use. The amount of energy a cell can produce depends on the amount of sunlight collected and the ability of the conversion layer. Different materials react to and convert different wavelengths of light.
“I realized that to increase efficiency we had to absorb more light,” said Lakhtakia. “To do that we had to make the absorbent layer nonhomogeneous in a special way.”
That special way was to use two different absorbent materials in two different thin films. The researchers chose commercially available CIGS — copper indium gallium diselenide — and CZTSSe — copper zinc tin sulfur selenide— for the layers. By itself, CIGS’s efficiency is about 20% and CZTSSe’s is about 11%.
These two materials work in a solar cell because the structure of both materials is the same. They have roughly the same lattice structure, so they can be grown one on top of the other, and they absorb different frequencies of the spectrum so they should increase efficiency, according to Lakhtakia.
“It was amazing,” said Lakhtakia. “Together they produced a solar cell with 34% efficiency. This creates a new solar cell architecture — layer upon layer. Others who can actually make solar cells can find other formulations of layers and perhaps do better.”
According to the researchers, the next step is to create these experimentally and see what the options are to get the final, best answers.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
Thin film solar cells
- The GRAPES Spearhead Project: Graphene Perovskite Panels and the Future of Solar Energyon May 6, 2021 at 1:38 am
Several Graphene Flagship partner companies have introduced layered solar technology based on graphene and related materials that promises to increase the efficiency and stability of thin-film ...
- Global Thin-film Solar Cell Market Statistics, Development and Growth 2020on May 5, 2021 at 1:39 am
Summary: This report presents a comprehensive overview, market shares, and growth opportunities of Global Thin-film Solar Cell Wheelbarrow market by product type, application, key ...
- New era of thin films calls for PVDon May 4, 2021 at 7:36 pm
A rethink is required for the mass production of high-efficiency solar cells, says German PV cell production equipment supplier Von Ardenne. And it’s not just TOPCon and heterojunction PV where ...
- Closing in on state-of-the-art semiconductor solar cellson May 4, 2021 at 9:35 am
A synthetic approach that improves absorber layers in perovskite solar cells could help them achieve their full potential and draw closer to the performance of leading gallium arsenide devices.
- Closing in on state-of-the-art semiconductor solar cellson May 4, 2021 at 7:04 am
Solar cells that rely on perovskite thin films to capture sunlight are the fastest growing photovoltaic technology. Cheaper and easier to manufacture and incorporate into devices than conventional ...
Go deeper with Google Headlines on:
Thin film solar cells
Go deeper with Bing News on:
- Researchers Boost Performance of Solar Cells By Using Human Hair From a Barbershopon May 7, 2021 at 11:19 am
Queensland researchers have used carbon dots, created from human hair waste, to improve solar technology performance.
- EGEB: A ‘molecular glue’ discovery makes perovskite solar cells more durableon May 7, 2021 at 7:26 am
Scientists strengthen a key weak point in perovskite solar cells; Orsted and Polish energy company PGE to build 2.5 GW offshore wind farms.
- Sono Motors works with MAN to integrate solar panels into vanson May 7, 2021 at 6:37 am
Sono Motors announced a letter of intent with MAN Truck & Bus to explore integration of its solar technology into MAN's eTGE van.
- Breakthrough dramatically increases the reliability of perovskite solar cellson May 7, 2021 at 3:19 am
One of the materials being investigated for use in making new types of solar cells is perovskite. The are several drawbacks to the material that researchers are working to overcome, and one of ...
- Semitransparent selenium solar cell for applications in tandem deviceson May 7, 2021 at 12:21 am
The bifacial device showed a power conversion efficiency of 5.2% on the front side through an n-type contact and 2.7% on the rear side through a p-type contact.