Researchers invent new technique that could transform additive manufacturing processes, potentially enabling the printing of circuit boards, electromechanical components, and perhaps even robots.
“Additive manufacturing is key to economic resilience,” say Hod Lipson, James and Sally Scapa Professor of Innovation (Mechanical Engineering). “All of us care about this technology—it’s going to save us. But there’s a catch.”
The catch is that SLS technologies have been limited to printing with a single material at a time: the entire part has to be made of just that one powder. “Now, let me ask you,” Lipson continues, “how many products are made of just one material? The limitations of printing in only one material has been haunting the industry and blocking its expansion, preventing it from reaching its full potential.”
Wondering how to solve this challenge, Lipson and his PhD student John Whitehead used their expertise in robotics to develop a new approach to overcome these SLS limitations. By inverting the laser so that it points upwards, they invented a way to enable SLS to use—at the same time—multiple materials. Their working prototype, along with a print sample that contained two different materials in the same layer, was recently published online by Additive Manufacturing as part of its December 2020 issue.
“Our initial results are exciting,” says Whitehead, the study’s lead author, “because they hint at a future where any part can be fabricated at the press of a button, where objects ranging from simple tools to more complex systems like robots can be removed from a printer fully formed, without the need for assembly.”
Selective laser sintering traditionally has involved fusing together material particles using a laser pointing downward into a heated print bed. A solid object is built from the bottom up, with the printer placing down a uniform layer of powder and using the laser to selectively fuse some material in the layer. The printer then deposits a second layer of powder onto the first layer, the laser fuses new material to the material in the previous layer, and the process is repeated over and over until the part is completed.
This process works well if there is just one material used in the printing process. But using multiple materials in a single print has been very challenging, because once the powder layer is deposited onto the bed, it cannot be unplaced, or replaced with a different powder.
“Also,” adds Whitehead, “in a standard printer, because each of the successive layers placed down are homogeneous, the unfused material obscures your view of the object being printed, until you remove the finished part at the end of the cycle. Think about excavation and how you can’t be sure the fossil is intact until you completely remove it from the surrounding dirt. This means that a print failure won’t necessarily be found until the print is completed, wasting time and money.”
The researchers decided to find a way to eliminate the need for a powder bed entirely. They set up multiple transparent glass plates, each coated with a thin layer of a different plastic powder. They lowered a print platform onto the upper surface of one of the powders, and directed a laser beam up from below the plate and through the plate’s bottom. This process selectively sinters some powder onto the print platform in a pre-programmed pattern according to a virtual blueprint. The platform is then raised with the fused material, and moved to another plate, coated with a different powder, where the process is repeated. This allows multiple materials to either be incorporated into a single layer, or stacked. Meanwhile, the old, used-up plate is replenished.
In the paper, the team demonstrated their working prototype by generating a 50 layer thick, 2.18mm sample out of thermoplastic polyurethane (TPU) powder with an average layer height of 43.6 microns and a multi-material nylon and TPU print with an average layer height of 71 microns. These parts demonstrated both the feasibility of the process and the capability to make stronger, denser materials by pressing the plate hard against the hanging part while sintering.
“This technology has the potential to print embedded circuits, electromechanical components, and even robot components. It could make machine parts with graded alloys, whose material composition changes gradually from end to end, such as a turbine blade with one material used for the core and different material used for the surface coatings,” Lipson notes. “We think this will expand laser sintering towards a wider variety of industries by enabling the fabrication of complex multi-material parts without assembly. In other words, this could be key to moving the additive manufacturing industry from printing only passive uniform parts, towards printing active integrated systems.”
The researchers at Columbia University School of Engineering and Applied Science are now experimenting with metallic powders and resins in order to directly generate parts with a wider range of mechanical, electrical, and chemical properties than is possible with conventional SLS systems today.
The Latest Updates from Bing News & Google News
Go deeper with Bing News on:
- ExOne Joins the Additive Manufacturing Green Trade Association as a Founding Memberon January 21, 2021 at 11:15 am
The ExOne Company (NASDAQ:XONE), the global leader in industrial sand and metal 3D printers using binder jetting technology, today announced it has joined the ...
- CORRECTING and REPLACING ExOne Joins the Additive Manufacturer Green Trade Association as a Founding Member | Morningstaron January 21, 2021 at 6:25 am
Additive Manufacturer Green Trade Association (instead of Additive Manufacturing Green Trade Association). This press release features multimedia. View the full release here: ...
- SmarTech Analysis Releases Q3 2020 AM Market Data: Worldwide Additive Manufacturing Revenues ...on January 20, 2021 at 6:13 am
According to the latest reports from the “AM Market Data Service” published by SmarTech Analysis, revenues of the worldwide additive manufacturing (AM) industry reached $2.12B in Q3 2020. This number ...
- Medical Device Additive Manufacturing Market Growth, Business Strategies, Revenue Value, Comprehensive Analysis And Forecast By 2026on January 20, 2021 at 5:55 am
Final Report will add the analysis of the impact of COVID-19 on this industry." The Global " Medical Device Additive Manufacturing Market " report provides an in-depth market evaluation by ...
- Global Additive Manufacturing Market 2020 Growth Analysis by Key Players, Globally Effective Factors, Trends, Business Plans and Forecast to 2025on January 17, 2021 at 2:18 pm
Global Additive Manufacturing Market 2020 by Company, Regions, Type and Application, Forecast to 2025 interprets market overview, value chain structure, industrial environment, regional analysis, ...
Go deeper with Google Headlines on:
Go deeper with Bing News on:
- The US Air Force Wants Your 3D Scanner Ideason January 21, 2021 at 7:12 pm
One key piece of technology from Star Trek is the replicator, a machine that 3D prints up almost anything using some hazily-defined high technology. You have to wonder though, how did the patterns ...
- 3D Printing Medical Devices Market 2021 Share, Size, Segmented by Application and Geography Trends, Top Key Players, Growth and Forecasts 2026on January 21, 2021 at 1:04 pm
Global “3D Printing Medical Devices Market” research report contains in depth information of industry by size, ...
- 3D Printing Polymer Materials Market Size 2021 Research Report by Share, Challenges, Trends, Geographical Regions, and Opportunities to 2027on January 21, 2021 at 12:49 pm
Final Report will add the analysis of the impact of COVID-19 on this industry." “3D Printing Polymer Materials ...
- Meet Quinly for Ender 3: the world's first retrofit that automates 3D printingon January 21, 2021 at 11:00 am
PRNewswire/ - 3DQue Systems, a Vancouver-based 3D printing company, is excited to announce the official launch of Quinly, the world's first true ...
- Getting Closer To Metal 3D Printingon January 21, 2021 at 4:04 am
Most of our 3D printers lay down molten plastic or use photosensitive resin. But professional printers often use metal powder, laying out a pattern and then sintering it with a laser. [Metal ...