
In this photograph, the thermoelectric generator harnesses temperature differences to produce renewable electricity without active heat input. Here it is generating light. CREDIT Aaswath Raman
An inexpensive thermoelectric device harnesses the cold of space without active heat input, generating electricity that powers an LED at night, researchers report September 12 in the journal Joule.
“Remarkably, the device is able to generate electricity at night, when solar cells don’t work,” says lead author Aaswath Raman (@aaraman), an assistant professor of materials science and engineering at the University of California, Los Angeles. “Beyond lighting, we believe this could be a broadly enabling approach to power generation suitable for remote locations, and anywhere where power generation at night is needed.”
While solar cells are an efficient source of renewable energy during the day, there is currently no similar renewable approach to generating power at night. Solar lights can be outfitted with batteries to store energy produced in daylight hours for night-time use, but the addition drives up costs.
The device developed by Raman and Stanford University scientists Wei Li and Shanhui Fan sidesteps the limitations of solar power by taking advantage of radiative cooling, in which a sky-facing surface passes its heat to the atmosphere as thermal radiation, losing some heat to space and reaching a cooler temperature than the surrounding air. This phenomenon explains how frost forms on grass during above-freezing nights, and the same principle can be used to generate electricity, harnessing temperature differences to produce renewable electricity at night, when lighting demand peaks.
Raman and colleagues tested their low-cost thermoelectric generator on a rooftop in Stanford, California, under a clear December sky. The device, which consists of a polystyrene enclosure covered in aluminized mylar to minimize thermal radiation and protected by an infrared-transparent wind cover, sat on a table one meter above roof level, drawing heat from the surrounding air and releasing it into the night sky through a simple black emitter. When the thermoelectric module was connected to a voltage boost convertor and a white LED, the researchers observed that it passively powered the light. They further measured its power output over six hours, finding that it generated as much as 25 milliwatts of energy per square meter.
Since the radiative cooler consists of a simple aluminum disk coated in paint, and all other components can be purchased off the shelf, Raman and the team believe the device can be easily scaled for practical use. The amount of electricity it generates per unit area remains relatively small, limiting its widespread applications for now, but the researchers predict it can be made twenty times more powerful with improved engineering–such as by suppressing heat gain in the radiative cooling component to increase heat-exchange efficiency–and operation in a hotter, drier climate.
“Our work highlights the many remaining opportunities for energy by taking advantage of the cold of outer space as a renewable energy resource,” says Raman. “We think this forms the basis of a complementary technology to solar. While the power output will always be substantially lower, it can operate at hours when solar cells cannot.”
Learn more: Device generates light from the cold night sky
The Latest on: Thermoelectric device
via Google News
The Latest on: Thermoelectric device
- Battery-free wearables harvest energy from skin temperatureon January 25, 2021 at 4:13 am
Concerning existing substrates used for research on flexible thermoelectric devices, their heat energy transfer efficiency is low as a result of very low thermal conductivity. Their heat absorption ...
- Thermopower and harvesting heaton January 21, 2021 at 1:52 pm
Although the thermoelectric device and thermionic capacitor build on the material's Seebeck effect and ionic Soret effect, respectively, a device is far more than the constituent active materials. Not ...
- Thermoelectric Paint Opens Prospect Of Easier Energy Harvestingon January 20, 2021 at 4:00 pm
We will all be used to the thermoelectric effect in our electronic devices. The property of a junction of dissimilar conductors to either generate electricity from a difference in temperature (the ...
- Build Your Own Freezer With Thermoelectric Coolerson January 20, 2021 at 4:00 pm
Instead, this freezer uses thermoelectric devices to pump heat, in combination with a glycol cooling circuit and fan-cooled radiators. It’s not the most efficient or practical way to build a ...
- Thermoelectric Module Market Insights By Size Growth, Industry Share, Leading Players and Regional Forecast by 2026 | Fortune Business Insightson January 19, 2021 at 9:24 pm
The global thermoelectric module market is poised to experience impressive growth as alternative energy techno4logies ...
- Energy harvesting made possible with skin temperatureon January 13, 2021 at 1:34 am
(Nanowerk News) A thermoelectric device is an energy conversion device that utilizes the voltage generated by the temperature difference between both ends of a material; it is capable of converting ...
- Energy harvesting made possible with skin temperatureon January 12, 2021 at 9:01 pm
A thermoelectric device is an energy conversion device that utilizes the voltage generated by the temperature difference between both ends of a material; it is capable of converting heat energy ...
- Large-scale Typeon January 12, 2021 at 10:29 am
As another critical strategy we have focused on methods for module production, which are industry and mass production compatible, i.e. semiconductor thin film devices and flexible hybrid sheets. With ...
- Scientists measure local vibrational modes at individual crystalline faultson January 12, 2021 at 4:33 am
With this technique, they were able to observe individual defects in cubic silicon carbide, a material with a wide range of applications in electronic devices. Pan and his colleagues were familiar ...
- California Nanotechnologies Announces Q3/FY2021 Results & New Thermoelectrics Customerson January 12, 2021 at 1:43 am
Company announces $201K revenue for Q3 despite COVID impactNine-month revenue at $646KCompany adds new customers in thermoelectrics & defense industriesLOS ANGELES, CA / ACCESSWIRE / January 11, 2021 ...
via Bing News