Researchers from North Carolina State University and Elon University have developed a technique that allows them to remotely control the movement of soft robots, lock them into position for as long as needed and later reconfigure the robots into new shapes. The technique relies on light and magnetic fields.
“We’re particularly excited about the reconfigurability,” says Joe Tracy, a professor of materials science and engineering at NC State and corresponding author of a paper on the work. “By engineering the properties of the material, we can control the soft robot’s movement remotely; we can get it to hold a given shape; we can then return the robot to its original shape or further modify its movement; and we can do this repeatedly. All of those things are valuable, in terms of this technology’s utility in biomedical or aerospace applications.”
For this work, the researchers used soft robots made of a polymer embedded with magnetic iron microparticles. Under normal conditions, the material is relatively stiff and holds its shape. However, researchers can heat up the material using light from a light-emitting diode (LED), which makes the polymer pliable. Once pliable, researchers demonstrated that they could control the shape of the robot remotely by applying a magnetic field. After forming the desired shape, researchers could remove the LED light, allowing the robot to resume its original stiffness – effectively locking the shape in place.
By applying the light a second time and removing the magnetic field, the researchers could get the soft robots to return to their original shapes. Or they could apply the light again and manipulate the magnetic field to move the robots or get them to assume new shapes.
In experimental testing, the researchers demonstrated that the soft robots could be used to form “grabbers” for lifting and transporting objects. The soft robots could also be used as cantilevers, or folded into “flowers” with petals that bend in different directions.
“We are not limited to binary configurations, such as a grabber being either open or closed,” says Jessica Liu, first author of the paper and a Ph.D. student at NC State. “We can control the light to ensure that a robot will hold its shape at any point.”
In addition, the researchers developed a computational model that can be used to streamline the soft robot design process. The model allows them to fine-tune a robot’s shape, polymer thickness, the abundance of iron microparticles in the polymer, and the size and direction of the required magnetic field before constructing a prototype to accomplish a specific task.
“Next steps include optimizing the polymer for different applications,” Tracy says. “For example, engineering polymers that respond at different temperatures in order to meet the needs of specific applications.”
The Latest on: Soft robot reconfigurability
via Google News
The Latest on: Soft robot reconfigurability
- The Bus That’s Not A Bus: The Joys Of Hacking PCI Expresson April 7, 2021 at 4:59 pm
PCI Express (PCIe) has been around since 2003, and in that time it has managed to become the primary data interconnect for not only expansion cards, but also high-speed external devices.
- Advanced materials (Deerfield Beach, Fla.)on April 6, 2021 at 5:00 pm
Simultaneous Incorporation of Two Types of Azo-Groups in the Side Chains of a Conjugated D-A Polymer for Logic Control of the Semiconducting Performance by Light Irradiation.
- Tunable 4D-Printed Materials Change Shape in Response to Temperatureon March 30, 2021 at 5:00 pm
“Our 4D-printed metamaterials add tunability, reconfigurability, and deployability ... such as a solar panel; and soft robots that could have variable flexibility or stiffness that is tailored to the ...
- 3+ ways to design reconfigurable algorithm accelerator in IP blockon March 14, 2021 at 5:00 pm
The reconfigurability would also make it possible to change the algorithms used after manufacturing even dynamically such that same silicon area could be used for accelerating several algorithms. 2.
- Twist again: Dynamically and reversibly controllable chirality in liquid crystalline elastomer micropostson March 3, 2021 at 4:00 pm
See allHide authors and affiliations Photoresponsive liquid crystalline elastomers (LCEs) constitute ideal actuators for soft robots because their light-induced macroscopic shape changes can be ...
- Embedded World 2018 - Speecheson June 26, 2018 at 6:01 pm
These blocks have been defined to cover the most of the gestures required by customers, but leaving to final user the customization of the application thanks to the high reconfigurability of each ...
via Bing News